Derivation of a dynamic model of the kinetics of nitrogen uptake throughout the growth of lettuce : calibration and validation

A kinetic model of nitrogen (N) uptake throughout growth was developed for lettuce cultivated in nutrient solution under varying natural light conditions. The model couples nitrogen uptake with dry matter accumulation using a two-compartment mechanistic approach, incorporating structural and non-structural pools. Maximum nitrogen uptake rates are assumed to decline with shoot dry weight, to allow for the effects of plant age. The model was parameterized using data from the literature, and calibrated for differences in light intensity using an optimization algorithm utilizing data from three experiments in different growing seasons. The calibrated model was validated against the data from two independent experiments conducted under different light conditions. Results showed that the model made good predictions of nitrogen uptake by plants from seedlings to maturity under fluctuating light levels in a glasshouse. Plants grown at a higher light intensity showed larger maximum nitrogen uptake rates, but the effect of light intensity declined towards plant maturity

Integrating CAA within the University of Ulster

Marking coursework is a time consuming activity, further exacerbated by the need for regular submission and timely, informative feedback. Increasing student numbers (particularly within computing and management) coupled with a decline in resources, mean that staff are unable to give formative feedback on student learning to the extent they may wish. Understandably there is concern that as the quantity of marking increases, there is a corresponding deterioration in the quality of assessment. This has led staff at the University of Ulster to investigate new ways to assess students. Computer Assisted Assessment (CAA) offers the opportunity to assess students more regularly without increasing staff workload. This paper outlines how WebCT has been used to support computer assisted assessment throughout the Faculty of Informatics and the Faculty of Business and Management at the University of Ulster

Application of activated barrier hopping theory to viscoplastic modeling of glassy polymers

YesAn established statistical mechanical theory of amorphous polymer deformation has been incorporated as a plastic mechanism into a constitutive model and applied to a range of polymer mechanical deformations. The temperature and rate dependence of the tensile yield of PVC, as reported in early studies, has been modeled to high levels of accuracy. Tensile experiments on PET reported here are analyzed similarly and good accuracy is also achieved. The frequently observed increase in the gradient of the plot of yield stress against logarithm of strain rate is an inherent feature of the constitutive model. The form of temperature dependence of the yield that is predicted by the model is found to give an accurate representation. The constitutive model is developed in two-dimensional form and implemented as a user-defined subroutine in the finite element package ABAQUS. This analysis is applied to the tensile experiments on PET, in some of which strain is localized in the form of shear bands and necks. These deformations are modeled with partial success, though adiabatic heating of the instability causes inaccuracies for this isothermal implementation of the model. The plastic mechanism has advantages over the Eyring process, is equally tractable,and presents no particular difficulties in implementation with finite elements.F. Boutenel acknowledges an Erasmus Programme Scholarshi

The nonlinear time-dependent response of isotactic polypropylene

Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is derived for the time-dependent behavior of semi-crystalline polymers. A polymer is treated as an equivalent network of chains bridged by permanent junctions. The network is modelled as an ensemble of passive meso-regions (with affine nodes) and active meso-domains (where junctions slip with respect to their positions in the bulk medium with various rates). The distribution of activation energies for sliding in active meso-regions is described by a random energy model. Adjustable parameters in the stress--strain relations are found by fitting experimental data. It is demonstrated that the concentration of active meso-domains monotonically grows with strain, whereas the average potential energy for sliding of junctions and the standard deviation of activation energies suffer substantial drops at the yield point. With reference to the concept of dual population of crystalline lamellae, these changes in material parameters are attributed to transition from breakage of subsidiary (thin) lamellae in the sub-yield region to fragmentation of primary (thick) lamellae in the post-yield region of deformation.Comment: 29 pages, 12 figure

Theory and design of Inx_{x}Ga1−x_{1-x}As1−y_{1-y}Biy_{y} mid-infrared semiconductor lasers: type-I quantum wells for emission beyond 3 μ\mum on InP substrates

We present a theoretical analysis and optimisation of the properties and performance of mid-infrared semiconductor lasers based on the dilute bismide alloy In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$, grown on conventional (001) InP substrates. The ability to independently vary the epitaxial strain and emission wavelength in this quaternary alloy provides significant scope for band structure engineering. Our calculations demonstrate that structures based on compressively strained In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ quantum wells (QWs) can readily achieve emission wavelengths in the 3 -- 5 $\mu$m range, and that these QWs have large type-I band offsets. As such, these structures have the potential to overcome a number of limitations commonly associated with this application-rich but technologically challenging wavelength range. By considering structures having (i) fixed QW thickness and variable strain, and (ii) fixed strain and variable QW thickness, we quantify key trends in the properties and performance as functions of the alloy composition, structural properties, and emission wavelength, and on this basis identify routes towards the realisation of optimised devices for practical applications. Our analysis suggests that simple laser structures -- incorporating In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ QWs and unstrained ternary In$_{0.53}$Ga$_{0.47}$As barriers -- which are compatible with established epitaxial growth, provide a route to realising InP-based mid-infrared diode lasers.Comment: Submitted versio

From ‘other’ to involved: User involvement in research: An emerging paradigm

This article has been made available through the Brunel Open Access Publishing Fund. Copyright @ 2013 The Author(s). This is an Open Access article. Non-commercial re-use, distribution, and reproduction in any medium, provided the original work is properly attributed, cited, and is not altered, transformed, or built upon in any way, is permitted. The moral rights of the named author(s) have been asserted.This article explores the issue of ‘othering’ service users and the role that involving them, particularly in social policy and social work research may play in reducing this. It takes, as its starting point, the concept of ‘social exclusion’, which has developed in Europe and the marginal role that those who have been included in this construct have played in its development and the damaging effects this may have. The article explores service user involvement in research and is itself written from a service user perspective. It pays particular attention to the ideological, practical, theoretical, ethical and methodological issues that such user involvement may raise for research. It examines problems that both research and user involvement may give rise to and also considers developments internationally to involve service users/subjects of research, highlighting some of the possible implications and gains of engaging service user knowledge in research and the need for this to be evaluated

Dual captures of Colorado rodents: implications for transmission of hantaviruses.

We analyzed dual-capture data collected during longitudinal studies monitoring transmission and persistence of Sin Nombre virus in rodents in Colorado. Our data indicate that multiple captures (two or more rodents captured in a single trap) may not be random, as indicated by previous studies, but rather the result of underlying, species-specific social behavior or cohesiveness. In the pairs we captured, most often, rodents were of the same species, were male, and could be recaptured as pairs. Therefore, dual captures of rodents, which are unusual but not rare, tend to occur among certain species, and appear to be nonrandom, group-foraging encounters. These demographic and ecologic characteristics may have implications for the study of the transmission of hantaviruses

A concise patient reported outcome measure for people with aphasia: the aphasia impact questionnaire 21

Background: There are many validated and widely used assessments within aphasiology. Few, however, describe language and life with aphasia from the perspective of the person with aphasia. Across healthcare, patient experience and user involvement are increasingly acknowledged as fundamental to person-centred care. As part of this movement, Patient Reported Outcome Measures (PROMs) are being used in service evaluation and planning. Aims: This paper reports the quantitative aspects of a mixed methods study that developed and validated a concise PROM, the Aphasia Impact Questionnaire (AIQ), co-produced with People with Aphasia (PWA). Methods & Procedures: The AIQ was developed within the social model of disability and all stages of the development of the AIQ were performed in partnership with PWA. It was adapted from a pre-existing and lengthier PROM for PWA, the Communication Disability Profile. The first iterations of the AIQ focused on domains of communication, participation and well-being/emotional state. Subsequently the AIQ was extended to include additional items relating to reading and writing (AIQ-21). The research design was iterative. Initially, concurrent validity, internal consistency, and sensitivity of the AIQ-prototype were obtained. The AIQ-prototype was modified to become the AIQ-21. Statistical testing with a new group of PWA was performed, investigating internal consistency and concurrent validity of the AIQ-21. Outcomes & Results: Results for both the AIQ-prototype and AIQ-21 showed statistically significant concurrent validity and good internal consistency. Repeated measurement using the AIQ-prototype demonstrated statistically significant change after PWA accessed a community intervention. Conclusions: The AIQ-21 is a PROM that has great potential to be one of the core set of aphasia tests for clinical and research use. Results can be used alongside language assessment to enable person-centred goal setting and partnership working for people with aphasia

An atmospheric perspective on North American carbon dioxide exchange: CarbonTracker

We present an estimate of net CO2 exchange between the terrestrial biosphere and the atmosphere across North America for every week in the period 2000 through 2005. This estimate is derived from a set of 28,000 CO2 mole fraction observations in the global atmosphere that are fed into a state-of-the-art data assimilation system for CO2 called CarbonTracker. By design, the surface fluxes produced in CarbonTracker are consistent with the recent history of CO2 in the atmosphere and provide constraints on the net carbon flux independent from national inventories derived from accounting efforts. We find the North American terrestrial biosphere to have absorbed –0.65 PgC/yr (1 petagram = 10^15 g; negative signs are used for carbon sinks) averaged over the period studied, partly offsetting the estimated 1.85 PgC/yr release by fossil fuel burning and cement manufacturing. Uncertainty on this estimate is derived from a set of sensitivity experiments and places the sink within a range of –0.4 to –1.0 PgC/yr. The estimated sink is located mainly in the deciduous forests along the East Coast (32%) and the boreal coniferous forests (22%). Terrestrial uptake fell to –0.32 PgC/yr during the large-scale drought of 2002, suggesting sensitivity of the contemporary carbon sinks to climate extremes. CarbonTracker results are in excellent agreement with a wide collection of carbon inventories that form the basis of the first North American State of the Carbon Cycle Report (SOCCR), to be released in 2007. All CarbonTracker results are freely available at http://carbontracker.noaa.gov

Biodegradation of the Alkaline Cellulose Degradation Products Generated during Radioactive Waste Disposal.

The anoxic, alkaline hydrolysis of cellulosic materials generates a range of cellulose degradation products (CDP) including α and β forms of isosaccharinic acid (ISA) and is expected to occur in radioactive waste disposal sites receiving intermediate level radioactive wastes. The generation of ISA's is of particular relevance to the disposal of these wastes since they are able to form complexes with radioelements such as Pu enhancing their migration. This study demonstrates that microbial communities present in near-surface anoxic sediments are able to degrade CDP including both forms of ISA via iron reduction, sulphate reduction and methanogenesis, without any prior exposure to these substrates. No significant difference (n = 6, p = 0.118) in α and β ISA degradation rates were seen under either iron reducing, sulphate reducing or methanogenic conditions, giving an overall mean degradation rate of 4.7×10−2 hr−1 (SE±2.9×10−3). These results suggest that a radioactive waste disposal site is likely to be colonised by organisms able to degrade CDP and associated ISA's during the construction and operational phase of the facility