80 research outputs found
Numerical Modeling of Ooid Size and the Problem of Neoproterozoic Giant Ooids
Temporal variation in ooid size reflects important changes in physical and chemical characteristics of depositional environments. Two numerical models are used to evaluate the effects of several processes influencing ooid size. The first demonstrates that low supply of new ooid nuclei and high cortex growth rate each promote growth of large ooids. The second model demonstrates that high average water velocity and velocity gradient also enhance ooid growth.
Several Neoproterozoic oolites contain unusually large ooids, some reaching diameters of up to 16 mm. While lower nuclei supply and higher ooid growth rate may have prevailed prior to the evolution of carbonate-secreting organisms, neither difference can explain the presence of giant ooids in Neoproterozoic deposits because Archean through Mesoproterozoic ooids rarely exceed 5 mm in diameter. In the presence of lower nuclei supply and higher growth rate, high average water velocity may have allowed growth of such large ooids. Higher average water velocity could have been due to a prevalence of carbonate ramps over rimmed shelves during Neoproterozoic time
Recommended from our members
Energetic and Environmental Constraints on the Community Structure of Benthic Microbial Mats in Lake Fryxell, Antarctica.
Ecological communities are regulated by the flow of energy through environments. Energy flow is typically limited by access to photosynthetically active radiation (PAR) and oxygen concentration (O2). The microbial mats growing on the bottom of Lake Fryxell, Antarctica, have well-defined environmental gradients in PAR and (O2). We analyzed the metagenomes of layers from these microbial mats to test the extent to which access to oxygen and light controls community structure. We found variation in the diversity and relative abundances of Archaea, Bacteria and Eukaryotes across three (O2) and PAR conditions: high (O2) and maximum PAR, variable (O2) with lower maximum PAR, and low (O2) and maximum PAR. We found distinct communities structured by the optimization of energy use on a millimeter-scale across these conditions. In mat layers where (O2) was saturated, PAR structured the community. In contrast, (O2) positively correlated with diversity and affected the distribution of dominant populations across the three habitats, suggesting that meter-scale diversity is structured by energy availability. Microbial communities changed across covarying gradients of PAR and (O2). The comprehensive metagenomic analysis suggests that the benthic microbial communities in Lake Fryxell are structured by energy flow across both meter- and millimeter-scales
Mars Sedimentary Geology: Key Concepts and Outstanding Questions
Processes that operate at planetary surfaces have the
potential to record a history of planetary evolution in the
form of sedimentary rocks. This is important because our
experience on Earth shows that sediments and sedimentary
rocks are the dominant archive of high-resolution proxies of
present and past tectonic, climatic, and biological processes.
Our understanding of the evolution of Earthâs very ancient
climate and paleobiological records derives from detailed
examination of the mineralogical, textural, and geochemical
signatures preserved in the sedimentary rock record.
Sedimentary rocks were first recognized on Mars less than a decade ago (Malin and Edgett, 2000). Recent interpretations of data collected by the Mars Express and Mars Reconnaissance Orbiter spacecraft have confirmed the surprising abundance of these sedimentary rocks, the past role of water on the martian surface, and the similarityâin some casesâto sedimentary rocks formed on Earth. Thick sulfaterich deposits invite comparison to terrestrial evaporites (Grotzinger et al., 2005). In other cases, clay-rich strata are interpreted as the terminal deposits of source-to-sink systems with well-developed fluvial networks in the upper reaches of watersheds that date back to a much wetter period in Marsâ earliest history (Ehlmann et al., 2008; Metz et al., 2009). However, these Earth-like depositional systems contrast with other deposits that may be unique in the Solar System: for example, vast terrains as large as Earthâs continents covered by thick veneers of strata that may derive entirely from settling out of wind-transported dust (Bridges et al., 2010). Whatever their origin, it is now clear that the sedimentary rocks of Mars represent a new frontier for research. Mars science is in its golden era of explorationâthe past decade of orbiter and landed missions has produced an extraordinary amount of new data relevant to the analysis of sediments and sedimentary rocks, and robust international programs exist for future missions. To help stimulate discussion of these data, the First International Conference on Mars Sedimentology and Stratigraphy was convened in El
Paso, Texas, in April 2010. The contents of this white paper
represent the most significant findings of the conference,
with additional information provided by the coauthors, and
focus on seven key questions for future investigation by the
sedimentary geology community
Understanding Microbialite Morphology Using a Comprehensive Suite of Three-Dimensional Analysis Tools
Abstract Microbialites can have complex morphologies that preserve clues to ancient microbial ecology. However, extracting and interpreting these clues is challenging due to both the complexity of microbial structures and the difficulties of connecting morphology to microbial processes. Fenestrate microbialites from the 2521 -3 Ma Gamohaan Formation, South Africa, have intricate structures composed of three distinct microbial structures: steeply dipping supports (surfaces defined by organic inclusions), more shallowly dipping supports with diffuse organic inclusions below them, and draping laminae. In polished slabs, shallowly dipping supports with diffuse organic inclusions show apparent dips from 27°to 60°, and supports without associated zones of diffuse inclusions dip 75°to 88°, which suggests a distinction between support types based on orientation. However, dips exposed in polished slabs are apparent dips, and three-dimensional analysis is required for analysis of true dips. Through the Keck Center for Active Visualization in Earth Sciences (KeckCAVES), we used locally developed software that controls a three-dimensional environment with head and hand tracking (an ''immersive environment'') to visualize and interpret virtual microbialite data sets. Immersive environments have not penetrated into standard scientific work processes (''workflows'') due to their high costs, steep learning curves, and low productivity for users. By contrast, our suite of software tools allowed us to develop a personalized scientific workflow that provides a complete path from initial ideas to characterization of fenestrate microbialites' features. Results of three-dimensional analysis of fenestrate microbialites show that supports with inclusions dip 65°to 75°, whereas supports without inclusions dip 85°to 90°. These results demonstrate that all supports have very steep dips, and a 10°dip gap exists between supports with and without inclusions, which suggests they grew in fundamentally different ways. Results also emphasize how valuable three-dimensional analysis is when combined with a comprehensive workflow for understanding intricate structures such as fenestrate microbialites
Biogeographic distribution of five Antarctic cyanobacteria using large-scale k-mer searching with sourmash branchwater
Cyanobacteria form diverse communities and are important primary producers in Antarctic freshwater environments, but their geographic distribution patterns in Antarctica and globally are still unresolved. There are however few genomes of cultured cyanobacteria from Antarctica available and therefore metagenome-assembled genomes (MAGs) from Antarctic cyanobacteria microbial mats provide an opportunity to explore distribution of uncultured taxa. These MAGs also allow comparison with metagenomes of cyanobacteria enriched communities from a range of habitats, geographic locations, and climates. However, most MAGs do not contain 16S rRNA gene sequences, making a 16S rRNA gene-based biogeography comparison difficult. An alternative technique is to use large-scale k-mer searching to find genomes of interest in public metagenomes. This paper presents the results of k-mer based searches for 5 Antarctic cyanobacteria MAGs from Lake Fryxell and Lake Vanda, assigned the names Phormidium pseudopriestleyi FRX01, Microcoleus sp. MP8IB2.171, Leptolyngbya sp. BulkMat.35, Pseudanabaenaceae cyanobacterium MP8IB2.15, and Leptolyngbyaceae cyanobacterium MP9P1.79 in 498,942 unassembled metagenomes from the National Center for Biotechnology Information (NCBI) Sequence Read Archive (SRA). The Microcoleus sp. MP8IB2.171 MAG was found in a wide variety of environments, the P. pseudopriestleyi MAG was found in environments with challenging conditions, the Leptolyngbyaceae cyanobacterium MP9P1.79 MAG was only found in Antarctica, and the Leptolyngbya sp. BulkMat.35 and Pseudanabaenaceae cyanobacterium MP8IB2.15 MAGs were found in Antarctic and other cold environments. The findings based on metagenome matches and global comparisons suggest that these Antarctic cyanobacteria have distinct distribution patterns ranging from locally restricted to global distribution across the cold biosphere and other climatic zones
Sulfur-bearing phases detected by evolved gas analysis of the Rocknest aeolian deposit, Gale Crater, Mars
The Sample Analysis at Mars (SAM) instrument suite detected SO_2, H_(2)S, OCS, and CS_2 from ~450 to 800°C during evolved gas analysis (EGA) of materials from the Rocknest aeolian deposit in Gale Crater, Mars. This was the first detection of evolved sulfur species from a Martian surface sample during in situ EGA. SO_2 (~3â22â”mol) is consistent with the thermal decomposition of Fe sulfates or Ca sulfites, or evolution/desorption from sulfur-bearing amorphous phases. Reactions between reduced sulfur phases such as sulfides and evolved O_2 or H_(2)O in the SAM oven are another candidate SO_2 source. H_(2)S (~41â109ânmol) is consistent with interactions of H_(2)O, H_2 and/or HCl with reduced sulfur phases and/or SO2 in the SAM oven. OCS (~1â5ânmol) and CS2 (~0.2â1ânmol) are likely derived from reactions between carbon-bearing compounds and reduced sulfur. Sulfates and sulfites indicate some aqueous interactions, although not necessarily at the Rocknest site; Fe sulfates imply interaction with acid solutions whereas Ca sulfites can form from acidic to near-neutral solutions. Sulfides in the Rocknest materials suggest input from materials originally deposited in a reducing environment or from detrital sulfides from an igneous source. The presence of sulfides also suggests that the materials have not been extensively altered by oxidative aqueous weathering. The possibility of both reduced and oxidized sulfur compounds in the deposit indicates a nonequilibrium assemblage. Understanding the sulfur mineralogy in Rocknest materials, which exhibit chemical similarities to basaltic fines analyzed elsewhere on Mars, can provide insight in to the origin and alteration history of Martian surface materials
Fluvial to Lacustrine Facies Transitions in Gale Crater, Mars
NASA's Curiosity rover has documented predominantly fluvial sedimentary rocks along its path from the landing site to the toe of the Peace Vallis alluvial fan (0.5 km to the east) and then along its 8 km traverse across Aeolis Palus to the base of Aeolis Mons (Mount Sharp). Lacustrine facies have been identified at the toe of the Peace Vallis fan and in the lowermost geological unit exposed on Aeolis Mons. These two depositional systems provide end members for martian fluvial/alluvial-lacustrine facies models. The Peace Vallis system consisted of an 80 square kilometers alluvial fan with decimeter-thick, laterally continuous fluvial sandstones with few sedimentary structures. The thin lacustrine unit associated with the fan is interpreted as deposited in a small lake associated with fan runoff. In contrast, fluvial facies exposed over most of Curiosity's traverse to Aeolis Mons consist of sandstones with common dune-scale cross stratification (including trough cross stratification), interbedded conglomerates, and rare paleochannels. Along the southwest portion of the traverse, sandstone facies include south-dipping meter-scale clinoforms that are interbedded with finer-grained mudstone facies, interpreted as lacustrine. Sedimentary structures in these deposits are consistent with deltaic deposits. Deltaic deposition is also suggested by the scale of fluvial to lacustrine facies transitions, which occur over greater than 100 m laterally and greater than 10 m vertically. The large scale of the transitions and the predicted thickness of lacustrine deposits based on orbital mapping require deposition in a substantial river-lake system over an extended interval of time. Thus, the lowermost, and oldest, sedimentary rocks in Gale Crater suggest the presence of substantial fluvial flow into a long-lived lake. In contrast, the Peace Vallis alluvial fan onlaps these older deposits and overlies a major unconformity. It is one of the youngest deposits in the crater, and requires only short-lived, transient flows
Evidence for plunging river plume deposits in the Pahrump Hills member of the Murray formation, Gale crater, Mars
Recent robotic missions to Mars have offered new insights into the extent, diversity and habitability of the Martian sedimentary rock record. Since the Curiosity rover landed in Gale crater in August 2012, the Mars Science Laboratory Science Team has explored the origins and habitability of ancient fluvial, deltaic, lacustrine and aeolian deposits preserved within the crater. This study describes the sedimentology of a ca 13 m thick succession named the Pahrump Hills member of the Murray formation, the first thick fineâgrained deposit discovered in situ on Mars. This work evaluates the depositional processes responsible for its formation and reconstructs its palaeoenvironmental setting. The Pahrump Hills succession can be subâdivided into four distinct sedimentary facies: (i) thinly laminated mudstone; (ii) lowâangle crossâstratified mudstone; (iii) crossâstratified sandstone; and (iv) thickly laminated mudstoneâsandstone. The very fine grain size of the mudstone facies and abundant millimetreâscale and subâmillimetreâscale laminations exhibiting quasiâuniform thickness throughout the Pahrump Hills succession are most consistent with lacustrine deposition. Lowâangle geometric discordances in the mudstone facies are interpreted as âscour and drapeâ structures and suggest the action of currents, such as those associated with hyperpycnal riverâgenerated plumes plunging into a lake. Observation of an overall upward coarsening in grain size and thickening of laminae throughout the Pahrump Hills succession is consistent with deposition from basinward progradation of a fluvialâdeltaic system derived from the northern crater rim into the Gale crater lake. Palaeohydraulic modelling constrains the salinity of the ancient lake in Gale crater: assuming river sediment concentrations typical of floods on Earth, plunging river plumes and sedimentary structures like those observed at Pahrump Hills would have required lake densities near freshwater to form. The depositional model for the Pahrump Hills member presented here implies the presence of an ancient sustained, habitable freshwater lake in Gale crater for at least ca 10^3 to 10^7 Earth years
Evidence for plunging river plume deposits in the Pahrump Hills member of the Murray formation, Gale crater, Mars
Recent robotic missions to Mars have offered new insights into the extent, diversity and habitability of the Martian sedimentary rock record. Since the Curiosity rover landed in Gale crater in August 2012, the Mars Science Laboratory Science Team has explored the origins and habitability of ancient fluvial, deltaic, lacustrine and aeolian deposits preserved within the crater. This study describes the sedimentology of a ca 13 m thick succession named the Pahrump Hills member of the Murray formation, the first thick fineâgrained deposit discovered in situ on Mars. This work evaluates the depositional processes responsible for its formation and reconstructs its palaeoenvironmental setting. The Pahrump Hills succession can be subâdivided into four distinct sedimentary facies: (i) thinly laminated mudstone; (ii) lowâangle crossâstratified mudstone; (iii) crossâstratified sandstone; and (iv) thickly laminated mudstoneâsandstone. The very fine grain size of the mudstone facies and abundant millimetreâscale and subâmillimetreâscale laminations exhibiting quasiâuniform thickness throughout the Pahrump Hills succession are most consistent with lacustrine deposition. Lowâangle geometric discordances in the mudstone facies are interpreted as âscour and drapeâ structures and suggest the action of currents, such as those associated with hyperpycnal riverâgenerated plumes plunging into a lake. Observation of an overall upward coarsening in grain size and thickening of laminae throughout the Pahrump Hills succession is consistent with deposition from basinward progradation of a fluvialâdeltaic system derived from the northern crater rim into the Gale crater lake. Palaeohydraulic modelling constrains the salinity of the ancient lake in Gale crater: assuming river sediment concentrations typical of floods on Earth, plunging river plumes and sedimentary structures like those observed at Pahrump Hills would have required lake densities near freshwater to form. The depositional model for the Pahrump Hills member presented here implies the presence of an ancient sustained, habitable freshwater lake in Gale crater for at least ca 10^3 to 10^7 Earth years
- âŠ