4,315 research outputs found

    High‑temperature structural phase transitions in neighborite: a high‑resolution neutron powder diffraction investigation

    Get PDF
    The nature of the apparently continuous structural phase transition at 1,049 K in the perovskite-structured, MgSiO3 isomorph, neighborite (NaMgF3), from the orthorhombic (Pbnm) hettotype phase to the cubic ( Pm3¯m ) aristotype structure, has been re-investigated using high-resolution, time-of-flight neutron powder diffraction. Using data collected at 1 K intervals close to the nominal phase transition temperature, the temperature dependence of the intensities of superlattice reflections at the M point (2πa[12,12,0]) and the R point (2πa[12,12,12]) of the pseudocubic Brillouin zone indicate the existence of a new intermediate tetragonal phase in space group P4/mbm, with a narrow phase field extending from ~1,046.5 to ~1,048.5 K, at ambient pressure. Group theoretical analysis shows that the structural transitions identified in this study, Pbnm–P4/mbm, and P4/mbm– Pm3¯m , are permitted to be second order. The observation of the tetragonal phase resolves the longstanding issue of why the high-temperature phase transition, previously identified as Pbnm– Pm3¯m , and which would be expected to be first order under Landau theory, is in fact found to be continuous. Analysis of the pseudocubic shear strain shows it to vary with a critical exponent of 0.5 implying that the phase transition from Pbnm to P4/mbm is tricritical in character. The large librational modes that exist in the MgF6 octahedron at high temperature, and the use of Gaussian probability density functions to describe atomic displacements, result in apparent bond shortening in the Mg–F distances, making mode amplitude determination an unreliable method for determination of the critical exponent from internal coordinates. Crystal structures are reported for the three phases of NaMgF3 at 1,033 K (Pbnm), 1,047 K (P4/mbm) and 1,049 K ( Pm3¯m )

    Development and evaluation of a diagnostic cytokine-release assay for Mycobacterium suricattae infection in meerkats (Suricata suricatta)

    Get PDF
    CITATION: Clarke, C., et al. 2017. Development and evaluation of a diagnostic cytokine-release assay for mycobacterium suricattae infection in meerkats (Suricata suricatta). BMC Veterinary Research, 13:2, doi:10.1186/s12917-016-0927-x.The original publication is available at http://bmcvetres.biomedcentral.comBackground: Sensitive diagnostic tools are necessary for the detection of Mycobacterium suricattae infection in meerkats (Suricata suricatta) in order to more clearly understand the epidemiology of tuberculosis and the ecological consequences of the disease in this species. We therefore aimed to develop a cytokine release assay to measure antigen-specific cell-mediated immune responses of meerkats. Results: Enzyme-linked immunosorbent assays (ELISAs) were evaluated for the detection of interferon-gamma (IFN-γ) and IFN-γ inducible protein 10 (IP-10) in meerkat plasma. An IP-10 ELISA was selected to measure the release of this cytokine in whole blood in response to Bovigam® PC-HP Stimulating Antigen, a commercial peptide pool of M. bovis antigens. Using this protocol, captive meerkats with no known M. suricattae exposure (n = 10) were tested and results were used to define a diagnostic cut off value (mean plus 2 standard deviations). This IP-10 release assay (IPRA) was then evaluated in free-living meerkats with known M. suricattae exposure, categorized as having either a low, moderate or high risk of infection with this pathogen. In each category, respectively, 24.7%, 27.3% and 82.4% of animals tested IPRA-positive. The odds of an animal testing positive was 14.0 times greater for animals with a high risk of M. suricattae infection compared to animals with a low risk. Conclusion: These results support the use of this assay as a measure of M. suricattae exposure in meerkat populations. Ongoing longitudinal studies aim to evaluate the value of the IPRA as a diagnostic test of M. suricattae infection in individual animals.http://bmcvetres.biomedcentral.com/articles/10.1186/s12917-016-0927-xPublisher's versio

    The association between major depressive disorder, use of antidepressants and bone mineral density (BMD) in men.

    Full text link
    OBJECTIVE: Both depression and use of antidepressants have been negatively associated with bone mineral density (BMD) but mainly in studies among postmenopausal women. Therefore, the aim of this study was to investigate these relationships in men. METHODS: Between 2006 and 2011, 928 men (aged 24-98 years) from the Geelong Osteoporosis Study completed a comprehensive questionnaire, clinical measurements and had BMD assessments at the forearm, spine, total hip and total body. Major depressive disorder (MDD) was identified using a structured clinical interview (SCID-I/NP). The cross-sectional associations between BMD and both MDD and antidepressant use were analyzed using multivariable linear regression. RESULTS: Of the study population, 84 (9.1%) men had a single MDD episode, 50 (5.4%) had recurrent episodes and 65 (7.0%) were using antidepressants at the time of assessment. Following adjustments, recurrent MDD was associated with lower BMD at the forearm and total body (-6.5%, P=0.033 and -2.5%, P=0.033, respectively compared to men with no history of MDD), while single MDD episodes were associated with higher BMD at the total hip (+3.4%, P=0.030). Antidepressant use was associated with lower BMD only in lower-weight men (<75-110 kg depending on bone site). CONCLUSIONS: Both depression and use of antidepressants should be taken into account as possible risk factors for osteoporosis in men

    Identifying Individuals at Risk for Fracture in Guatemala

    Get PDF
    INTRODUCTION: The FRAX calculator combines a set of clinical risk factors with country-specific incidence rates to determine the ten-year absolute risk of major osteoporotic fracture. However, regional or country-specific databases from Central American countries are not available. We compared the use of various FRAX databases and the Pluijm algorithm in determining risk of fracture. METHODS: We collected clinical risk factor data needed for the FRAX calculator and Pluijm algorithm of Hispanic women in Guatemala and calculated the FRAX absolute risk measures of major osteoporotic fracture and hip fracture. Subjects were postmenopausal women greater than age 40 with no history of using medication that affect bone. A random sample of 204 women in 34 different regions women in Guatemala City was visited in their homes to complete the surveys. The Pluijm risk score and FRAX risk score using the US Hispanic, Spain, and Mexican databases were calculated. RESULTS: We used the US NOF guidelines for treatment which suggest a treatment threshold for patients with a 10-year hip fracture probability ≥ 3% or a 10-year major osteoporotic fracture risk ≥ 20%. The number of patients meeting the suggested threshold limits for treatment using the Spain and Mexico calculators were identical. There was 100% conformity in threshold limits for both hip and major osteoporotic fracture risk. The mean conformity for any fracture risk between US Hispanic and the other two databases was 97.5%. Conformity was 99.0% based on major osteoporotic fracture and 97.5% based on risk of hip fracture. The Pluijm evaluation shows conformity of 87.2% and 83.3%, respectively, when compared to the US Hispanic and Spain/Mexico FRAX thresholds for risk of fracture. DISCUSSION: Although the different FRAX databases provide variations in the absolute risk of fracture, the overall conformity to treatment thresholds amongst the US Hispanic, Spain, and Mexico databases show the database used would have little effect as to the decision to treat. The Pluijm tool conforms to the FRAX thresholds and can be used as well. It does not matter which country-specific calculator or assessment tool is used, as there are a similar number of patients that would meet the intervention threshold

    Phonon-assisted radiofrequency absorption by gold nanoparticles resulting in hyperthermia

    Full text link
    It is suggested that in gold nanoparticles (GNPs) of about 5 nm sizes used in the radiofrequency (RF) hyperthermia, an absorption of the RF photon by the Fermi electron occurs with involvement of the longitudinal acoustic vibrational mode (LAVM), the dominating one in the distribution of vibrational density of states (VDOS). This physical mechanism helps to explain two observed phenomena: the size dependence of the heating rate (HR) in GNPs and reduced heat production in aggregated GNPs. The argumentation proceeds within the one-electron approximation, taking into account the discretenesses of energies and momenta of both electrons and LAVMs. The heating of GNPs is thought to consist of two consecutive processes: first, the Fermi electron absorbs simultaneously the RF photon and the LAVM available in the GNP; hereafter the excited electron gets relaxed within the GNP's boundary, exciting a LAVM with the energy higher than that of the previously absorbed LAVM. GNPs containing the Ta and/or Fe impurities are proposed for the RF hyperthermia as promising heaters with enhanced HRs, and GNPs with rare-earth impurity atoms are also brought into consideration. It is shown why the maximum HR values should be expected in GNPs with about 5-7 nm size.Comment: proceedings at the NATO Advanced Research workshop FANEM-2015 (Minsk, May 25-27, 2015). To be published in the final form in: "Fundamental and Applied NanoElectroMagnetics" (Springer Science + Business Media B.V.
    corecore