Fabrication and characterisation of short fibre reinforced elastomer composites for bending and twisting magnetic actuation

Polydimethylsiloxane (PDMS) films reinforced with short Nickel-coated Carbon Fibres (NiCF) were successfully fabricated, with the fibres aligned along different directions using an external magnetic field. The fibres were dispersed in the host matrix using sonication and mechanical mixing before being cured for 48 h in the magnetic field; thanks to the nickel functionalisation, the fibre orientation was achieved by a low intensity field (<0.2 T) which required an inexpensive experimental set-up. The main focus of this study was looking at the actuation potential of this magnetic composite material; successful actuation was achieved, showing its large displacement capability. The results confirm the presence of an instability controlled by the magnetic torque, as predicted by the introduced model. The composite films undergo a transition from a bending-only deformed configuration for the 0° fibre specimen, to a twisting-only configuration, achieved for fibres at 90°, whereas all the intermediate angles show both bending and twisting. This behaviour mirrors that which is used to propel a selection of marine mammals

Defining the Pseudomonas Genus: Where Do We Draw the Line with Azotobacter?

The genus Pseudomonas has gone through many taxonomic revisions over the past 100 years, going from a very large and diverse group of bacteria to a smaller, more refined and ordered list having specific properties. The relationship of the Pseudomonas genus to Azotobacter vinelandii is examined using three genomic sequence-based methods. First, using 16S rRNA trees, it is shown that A. vinelandii groups within the Pseudomonas close to Pseudomonas aeruginosa. Genomes from other related organisms (Acinetobacter, Psychrobacter, and Cellvibrio) are outside the Pseudomonas cluster. Second, pan genome family trees based on conserved gene families also show A. vinelandii to be more closely related to Pseudomonas than other related organisms. Third, exhaustive BLAST comparisons demonstrate that the fraction of shared genes between A. vinelandii and Pseudomonas genomes is similar to that of Pseudomonas species with each other. The results of these different methods point to a high similarity between A. vinelandii and the Pseudomonas genus, suggesting that Azotobacter might actually be a Pseudomonas

Long-term trends in submicron particle concentrations in a metropolitan area of the northeastern United States

Significant changes in emission sources have occurred in the northeastern United States over the past decade, due in part to the implementation of emissions standards, the introduction and addition of abatement technologies for road transport, changes in fuel sulfur content for road and non-road transport, as well as economic impacts of a major recession and differential fuel prices. These changes in emission scenarios likely affected the concentrations of airborne submicron particles. This study investigated the characteristics of 11–500 nm particle number concentrations and their size spectra in Rochester, NY during the past 15 years (2002 to 2016). The modal structure, diurnal, weekly and monthly patterns of particle number concentrations are analyzed. Long-term trends are quantified using seasonal-trend decomposition procedures based on “Loess”, Mann-Kendall regression with Theil-Sen slope and piecewise regression. Particle concentrations underwent significant (p &lt; 0.05) downward trends. An annual decrease of −323 particles/cm3/y (−4.6%/y) was estimated for the total particle number concentration using Theil-Sen analysis. The trends were driven mainly by the decrease in particles in the 11–50 nm range (−181 particles/cm3/y; −4.7%/y). Slope changes were investigated annually and seasonally. Piecewise regression found different slopes for different portions of the overall period with the strongest declines between 2005 and 2011/2013, followed by small upward trends between 2013 and 2016 for most size bins, possibly representing increased vehicular traffic after the recovery from the 2008 recession

Why are flare ribbons associated with the spines of magnetic null points generically elongated?

Coronal magnetic null points exist in abundance as demonstrated by extrapolations of the coronal field, and have been inferred to be important for a broad range of energetic events. These null points and their associated separatrix and spine field lines represent discontinuities of the field line mapping, making them preferential locations for reconnection. This field line mapping also exhibits strong gradients adjacent to the separatrix (fan) and spine field lines, that can be analysed using the `squashing factor', $Q$. In this paper we make a detailed analysis of the distribution of $Q$ in the presence of magnetic nulls. While $Q$ is formally infinite on both the spine and fan of the null, the decay of $Q$ away from these structures is shown in general to depend strongly on the null-point structure. For the generic case of a non-radially-symmetric null, $Q$ decays most slowly away from the spine/fan in the direction in which $|{\bf B}|$ increases most slowly. In particular, this demonstrates that the extended, elliptical high-$Q$ halo around the spine footpoints observed by Masson et al. (Astrophys. J., 700, 559, 2009) is a generic feature. This extension of the $Q$ halos around the spine/fan footpoints is important for diagnosing the regions of the photosphere that are magnetically connected to any current layer that forms at the null. In light of this, we discuss how our results can be used to interpret the geometry of observed flare ribbons in `circular ribbon flares', in which typically a coronal null is implicated. We conclude that both the physics in the vicinity of the null and how this is related to the extension of $Q$ away from the spine/fan can be used in tandem to understand observational signatures of reconnection at coronal null points.Comment: Pre-print version of article accepted for publication in Solar Physic

Towards a Synthetic Chloroplast

The evolution of eukaryotic cells is widely agreed to have proceeded through a series of endosymbiotic events between larger cells and proteobacteria or cyanobacteria, leading to the formation of mitochondria or chloroplasts, respectively. Engineered endosymbiotic relationships between different species of cells are a valuable tool for synthetic biology, where engineered pathways based on two species could take advantage of the unique abilities of each mutualistic partner.We explored the possibility of using the photosynthetic bacterium Synechococcus elongatus PCC 7942 as a platform for studying evolutionary dynamics and for designing two-species synthetic biological systems. We observed that the cyanobacteria were relatively harmless to eukaryotic host cells compared to Escherichia coli when injected into the embryos of zebrafish, Danio rerio, or taken up by mammalian macrophages. In addition, when engineered with invasin from Yersinia pestis and listeriolysin O from Listeria monocytogenes, S. elongatus was able to invade cultured mammalian cells and divide inside macrophages.Our results show that it is possible to engineer photosynthetic bacteria to invade the cytoplasm of mammalian cells for further engineering and applications in synthetic biology. Engineered invasive but non-pathogenic or immunogenic photosynthetic bacteria have great potential as synthetic biological devices

Orientation effects in short fibre-reinforced elastomers

The large strain behaviour of a short fibre-reinforced composite is studied through numerical simulations. The reinforcing fibres yield the macroscopic response transversely isotropic which is indeed the case of many reinforcements currently used in composites: short carbon fibres, cellulose whiskers, carbon nanotubes. As a result of the analysis, it is shown that the reorientation of the fibres that takes place at large strain has a significant effect on the overall material response by changing the axis of isotropy. This behaviour can be adequately described by using a transversely isotropic model whose strain energy function depends on three invariants: two isotropic and one representing the stretch along the direction of the fibres. To assess its capabilities, the model is compared to the results of experiments carried out by the authors on nickel-coated chopped carbon fibres in a vulcanised natural rubber matrix for which the fibre orientation is achieved by controlling an external magnetic field prior to curing. Possible applications include micro-sized propulsion devices and actuators. Copyright © 2014 by ASME