14 research outputs found
Structural complexity inferred from anisotropic resistivity: Example from airborne EM and compilation of historical resistivity/induced polarization data from the gold-rich Canadian Malartic district, Québec, Canada
This paper is © 2019 Society of Exploration Geophysicists. The posting is available free of charge and its use is subject to the SEG terms and conditions: https://seg.org/Terms-of-UseStructurally complex zones within orogenic terranes typically correspond to areas where there is interference between multiple fold generations and are known to be favorable pathways for fluid flow because of their higher permeability. In the Canadian Malartic district, gold anomalies have been linked with zones of structural complexity that have been quantified by outcrop bedding orientation measurements and calculation of bedding variance maps. In this work, historical apparent resistivity and induced polarization data in the Canadian Malartic district were reprocessed and combined with new surveys to create a compilation
of inverted chargeability and resistivity, which were then interpreted together with airborne electromagnetics and outcrop structural data. The results indicate chargeability anomalies, up to five times the background value, associated with the sulfide mineral content in monzodioritic dikes that are thickened in folds and hydrothermally altered. Although the airborne apparent half-space resistivity is mostly sensitive to conductive surficial cover, the inverted ground resistivity method is sensitive to deeper structure and likely represents bedrock signal at depths greater than 25 m. Inverted ground resistivity exhibits strong anisotropy in areas of subvertical bedding, where measured resistivities can vary by up to a factor of two, over the same location, depending on whether the survey lines are perpendicular or parallel to the strike of bedding. This result is observed at scales of 50 cm up to 100 m. Analysis of inverted ground resistivity together with bedding variance indicates a strong correlation between structurally complex zones with high bedding variance and a decrease in resistivity at depths greater than 25 m. This suggests that in places where the presence of disseminated gold cannot be directly detected, or where the outcrop exposure is limited due to overburden cover, geophysical data may still succeed in identifying structural complexity zones that could potentially host mineralization.Natural Sciences and Engineering Research Council of Canada and the Canada Mining Innovation Council (NSERC-CMIC Mineral Exploration Footprints Project Contribution 178
Geological and geophysical data compilation for the western Wabigoon and southern Abitibi subprovinces of the Superior Province, Ontario, Canada
The geoscientific data presented in this paper are a foundation for experimental and exploration geological research in the western Wabigoon and southern Abitibi subprovinces of the Superior Province in Ontario, Canada. New geological interpretations, in map and GIS formats, along with compiled mineral deposit information, structural databases, magnetic susceptibility measurements, and reprocessed aeromagnetic grids have been integrated to provide a basis for comparative studies between the two geologically similar yet economically disparate greenstone belts near Dryden and Timmins, Ontario, Canada. Data were acquired from a wide range of publicly sourced data releases and enhanced through the addition of new observations. New geological maps presented for both regions represent the culmination of integrating the multi-disciplinary geoscientific database and recent geological interpretation. Data contained within this publication are co-submitted with Montsion et al. [1]
The use of lithogeochemistry in delineating hydrothermal fluid pathways and vectoring towards gold mineralization in the Malartic district, Québec
International audienceThe world-class, oxidized intrusion-related Canadian Malartic gold deposit, with reserves estimated at 5.56 Moz Au grading 1.10 g/t Au, and a total geological endowment of 16.3 Moz Au, is one of the largest gold deposits in the Archean Superior Province of Canada. The gold mineralization is hosted predominantly by Pontiac Group metasedimentary rocks, Piché Group metavolcanic rocks, and quartz monzodiorite to granodiorite porphyritic intrusions. The ore takes the form of a low-grade envelope of disseminated pyrite (0.35 to 1 g/t Au) grading inwards into higher grade (>1 g/t Au) stockwork and breccia zones. Hydrothermal alteration in the metase-dimentary rocks is zonally distributed around the fluid pathways. Proximal alteration is characterized by a microcline±albite-quartz replacement-type assemblage, with lesser phlogopite, calcite±Fe-dolomite, pyrite and rutile. The distal alteration assemblage comprises biotite, microcline±albite, phengite, quartz, calcite, pyrite and rutile. In this study, we assess the magnitude and distribution of fluid-rock interaction in the metasedimentary rocks of the Malartic district. The metaturbidites are separated into four lithotypes based on grain-size to reduce the effects of primary depositional processes on mass change calculations. Despite the variability in protolith composition, the metasedimentary rocks define a geochemically consistent, cogenetic sequence. The results of the mass transfer calculations indicate progressive gains in CO 2 , S, K 2 O and LOI, as well as Au, Te, W, Ag, As, Be, Sb, Bi, Mo and Pb, from background, to distal and proximal alteration zones (relative to the least-altered samples). Molar element ratio analysis (alkali/aluminum) indicates an increase in alkali metasomatism (K and Na) adjacent to the main hydrothermal fluid pathways, which is manifested by the progressive stabilization of microcline and albite at the expense of oligoclase, biotite and white mica. Ore-associated pathfinder elements delineate broad enrichment patterns around the deposit, and are used to understand hydrothermal fluid circulation in the Malartic district. A statistical approach based on a comparison of the mass change results with the background composition provides robust constraints on the magnitude and extent of the lithogeochemical haloes. Generally, the alteration forms envelopes that extend along the S 2 fabric, with the largest lithogeochemical anomalies (e.g., Au, W, Te and Ag) reaching up to 10 km in length, and 2 km in width. The results of this study demonstrate that whole-rock lithogeochemistry can provide a valuable tool with which to define vectors toward gold mineralization in a regional exploration context
Predicting rock type and detecting hydrothermal alteration using machine learning and petrophysical properties of the Canadian Malartic ore and host rocks, Pontiac Subprovince, Québec, Canada
Making the link between geological and geophysical uncertainty: geodiversity in the Ashanti Greenstone Belt
Geophysical inversion contributions to mineral exploration: Lessons from the Footprints project
Magnetic and gravity inversions are used to create 2D or 3D models of the magnetic susceptibility and density, respectively using potential field data. Unconstrained inversions generate an output based on mathematical constraints imposed by the inversion algorithm. Constrained inversions integrate lithological, structural, and petrophysical information in the inversion process to produce more geologically meaningful results. This study analyses the validity of this assertion in the context of the NSERC-CMIC Mineral Exploration Footprints project. Unconstrained and constrained geophysical inversions were computed for three mining sites: a gold site (Canadian Malartic, QuĂŠbec), a copper site (Highland Valley, British Columbia) and a uranium site (Millennium-McArthur River, Saskatchewan). After initially computing unconstrained inversions, constrained inversions were developed using physical property measurements, which directly link geophysics to geology, and lithological boundaries extracted from an interpreted geological model. While each derived geological model is consistent with the geophysical data, each site exhibited some magnetic complexity that confounded the inversion. The gold site includes regions with strong magnetic signature which mask the more-weakly magnetic zone thereby hiding the magnetic signature associated with the ore body. Initial unconstrained inversions for the copper site yielded solutions with invalid depth extent. A consistency between the constrained model and the geological model is reached with iterative changes to the depth extent of the model. At the uranium site the observed magnetic signal is weak, but the inversion provided some insights which could be interpreted in terms of a already known complexly folded geological model.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author
Geological setting of the Wassa gold deposit, SW Ghana
International audienceIncluding past production, current indicated and inferred resources, Wassa is a 5 Moz poly-deformed early-orogenic gold deposit located on the eastern flank of the Ashanti Belt, in southwest Ghana. It is hosted by metamorphosed volcanic, intrusive and sedimentary rocks of the Sefwi Group (ca. 2260–2160 Ma). Early mineralization has an Eoeburnean age (2164 ± 22 Ma, Re–Os on pyrite) and is characterized by quartz veins, by a carbonate alteration of the host rocks, and by deformed gold-bearing pyrite. Remobilization of this gold occurred during the late stages of the Eburnean Orogeny (~ 2.1 Ga) and is associated with quartz-carbonate veins with visible gold and euhedral pyrites