Significance of foundation-soil separation in dynamic soil-structure interaction

THe dynamic response of flexible surface strip-foundations allowed to uplift is numerically obtained for externally applied forces of a transient time variation. The soil medium is represented by an isotropic, homogeneous and linear half-space. The soil is treated by a time domain boundary element method, while the flexible foundation is treated by the finite element method. It was concluded that intermediate relative stiffness leads to moderate deformations when uplift is permitted. Very flexible footings produce higher deformations in unilateral contact compared to bilateral contact, and thus should be considered in their design. Unilateral contact does not significantly increase deformations for stiff footings subjected to concentrated central loading. However, relatively large deformation differences occur when the loading is eccentric, necessitating consideration of uplift in their design

A new definition of strong motion duration and related parameters affecting the response of medium-long period structures,

ABSTRACT: This study presents a new definition of the strong motion duration, combining the alternative bracketed and significant duration definitions. Based on the time integral of the absolute ground velocity, a new index is defined, as the cumulative absolute displacement CAD. The index is used in order to evaluate the strong motion duration. The proposed bracketed-significant duration is well correlated with the strong motion part of the records, especially in the case of near-source events. The duration and the CAD index are correlated with the structural behaviour of medium-to-long period structures. Two normalized parameters representing the amplification of structural response and the number of equivalent loading cycles are determined in terms of the proposed duration and CAD indices. The proposed parameters appear to be better correlated with the structural response than other well-known indices

Analysis of local seismic response in the historical city centre of Nafplio (Greece)

Local seismic response analysis represents a fundamental tool for assessing the seismic risk of urban areas and Cultural Heritage (CH) sites, nevertheless several open questions remain when complex geological contexts are considered. This study has been carried out in the framework of the research project STABLE (H2020 RISE-Marie Curie Action) which has the aim of evaluating the seismic action on CH sites in the Mediterranean basin. One of them being the city of Nafplio (Greece), a site characterised by a peculiar geological setting and a medium-high regional seismic hazard. Geological and geophysical data have been collected to reconstruct both the subsoil model and the seismotectonic conditions. Several seismic ambient noise measurements were carried out to establish the site resonance frequency and to validate engineering-geological cross-sections for numerical modelling of the seismic wave propagation. Combined engineering-geological, geophysical and numerical modelling allowed evaluating the local seismic response of the urban area of Nafplio, providing a zonation map with homogeneous seismic response zones for which elastic response spectra will be obtained

Retrieval of Chlorophyll-a concentration and associated product uncertainty in optically diverse lakes and reservoirs

Satellite product uncertainty estimates are critical for the further development and evaluation of remote sensing algorithms, as well as for the user community (e.g., modelers, climate scientists, and decision-makers). Optical remote sensing of water quality is affected by significant uncertainties stemming from correction for atmospheric effects as well as a lack of algorithms that can be universally applied to waterbodies spanning several orders of magnitude in non-covarying substance concentrations. We developed a method to produce estimates of Chlorophyll-a (Chla) satellite product uncertainty on a pixel-by-pixel basis within an Optical Water Type (OWT) classification scheme. This scheme helps to dynamically select the most appropriate algorithms for each satellite pixel, whereas the associated uncertainty informs downstream use of the data (e.g., for trend detection or modeling) as well as the future direction of algorithm research. Observations of Chla were related to 13 previously established OWT classes based on their corresponding water-leaving reflectance (Rw), each class corresponding to specific bio-optical characteristics. Uncertainty models corresponding to specific algorithm - OWT combinations for Chla were then expressed as a function of OWT class membership score. Embedding these uncertainty models into a fuzzy OWT classification approach for satellite imagery allows Chla and associated product uncertainty to be estimated without a priori knowledge of the biogeochemical characteristics of a water body. Following blending of Chla algorithm results according to per-pixel fuzzy OWT membership, Chla retrieval shows a generally robust response over a wide range of class memberships, indicating a wide application range (ranging from 0.01 to 362.5 mg/m3). Low OWT membership scores and high product uncertainty identify conditions where optical water types need further exploration, and where biogeochemical satellite retrieval algorithms require further improvement. The procedure is demonstrated here for the Medium Resolution Imaging Spectrometer (MERIS) but could be repeated for other sensors, atmospheric correction methods and optical water quality variables

State space functional principal component analysis to identify spatiotemporal patterns in remote sensing lake water quality

Satellite remote sensing can provide indicative measures of environmental variables that are crucial to understanding the environment. The spatial and temporal coverage of satellite images allows scientists to investigate the changes in envi�ronmental variables in an unprecedented scale. However, identifying spatiotemporal patterns from such images is chal�lenging due to the complexity of the data, which can be large in volume yet sparse within individual images. This paper proposes a new approach, state space functional principal components analysis (SS-FPCA), to identify the spatiotemporal patterns in processed satellite retrievals and simultaneously reduce the dimensionality of the data, through the use of functional principal components. Furthermore our approach can be used to produce interpolations over the sparse areas. An algorithm based on the alternating expectation–conditional maximisation framework is proposed to estimate the model. The uncertainty of the estimated parameters is investigated through a parametric bootstrap procedure. Lake chlorophyll�a data hold key information on water quality status. Such information is usually only available from limited in situ sampling locations or not at all for remote inaccessible lakes. In this paper, the SS-FPCA is used to investigate the spatiotemporal patterns in chlorophyll-a data of Taruo Lake on the Tibetan Plateau, observed by the European Space Agency MEdium Resolution Imaging Spectromete

Assessment of atmospheric correction algorithms for the Sentinel-2A MultiSpectral Imager over coastal and inland waters

The relatively high spatial resolution, short revisit time and red-edge spectral band (705 nm) of the ESA Sentinel-2 Multi Spectral Imager makes this sensor attractive for monitoring water quality of coastal and inland waters. Reliable atmospheric correction is essential to support routine retrieval of optically active substance concentration from water-leaving reflectance. In this study, six publicly available atmospheric correction algorithms (Acolite, C2RCC, iCOR, l2gen, Polymer and Sen2Cor) are evaluated against above-water optical in situ measurements, within a robust methodology, in two optically diverse coastal regions (Baltic Sea, Western Channel) and from 13 inland waterbodies from 5 European countries with a range of optical properties. The total number of match-ups identified for each algorithm ranged from 1059 to 1668 with 521 match-ups common to all algorithms. These in situ and MSI match-ups were used to generate statistics describing the performance of each algorithm for each respective region and a combined dataset. All ACs tested showed high uncertainties, in many cases >100% in the red and >1000% in the near-infra red bands. Polymer and C2RCC achieved the lowest root mean square differences (~0.0016 sr−1) and mean absolute differences (~40–60% in blue/green bands) across the different datasets. Retrieval of blue-green and NIR-red band ratios indicate that further work on AC algorithms is required to reproduce the spectral shape in the red and NIR bands needed to accurately retrieve the chlorophyll-a concentration in turbid waters

Optical types of inland and coastal waters

Inland and coastal waterbodies are critical components of the global biosphere. Timely monitoring is necessary to enhance our understanding of their functions, the drivers impacting on these functions and to deliver more effective management. The ability to observe waterbodies from space has led to Earth observation (EO) becoming established as an important source of information on water quality and ecosystem condition. However, progress toward a globally valid EO approach is still largely hampered by inconsistences over temporally and spatially variable in-water optical conditions. In this study, a comprehensive dataset from more than 250 aquatic systems, representing a wide range of conditions, was analyzed in order to develop a typology of optical water types (OWTs) for inland and coastal waters. We introduce a novel approach for clustering in situ hyperspectral water reflectance measurements (n = 4045) from multiple sources based on a functional data analysis. The resulting classification algorithm identified 13 spectrally distinct clusters of measurements in inland waters, and a further nine clusters from the marine environment. The distinction and characterization of OWTs was supported by the availability of a wide range of coincident data on biogeochemical and inherent optical properties from inland waters. Phylogenetic trees based on the shapes of cluster means were constructed to identify similarities among the derived clusters with respect to spectral diversity. This typification provides a valuable framework for a globally applicable EO scheme and the design of future EO missions

Optical types of inland and coastal waters

Inland and coastal waterbodies are critical components of the global biosphere. Timely monitoring is necessary to enhance our understanding of their functions, the drivers impacting on these functions and to deliver more effective management. The ability to observe waterbodies from space has led to Earth observation (EO) becoming established as an important source of information on water quality and ecosystem condition. However, progress toward a globally valid EO approach is still largely hampered by inconsistences over temporally and spatially variable in‐water optical conditions. In this study, a comprehensive dataset from more than 250 aquatic systems, representing a wide range of conditions, was analyzed in order to develop a typology of optical water types (OWTs) for inland and coastal waters. We introduce a novel approach for clustering in situ hyperspectral water reflectance measurements (n = 4045) from multiple sources based on a functional data analysis. The resulting classification algorithm identified 13 spectrally distinct clusters of measurements in inland waters, and a further nine clusters from the marine environment. The distinction and characterization of OWTs was supported by the availability of a wide range of coincident data on biogeochemical and inherent optical properties from inland waters. Phylogenetic trees based on the shapes of cluster means were constructed to identify similarities among the derived clusters with respect to spectral diversity. This typification provides a valuable framework for a globally applicable EO scheme and the design of future EO missions

Estimating the concentration of total suspended solids in inland and coastal waters from Sentinel-2 MSI: A semi-analytical approach

Inland and coastal waters provide key ecosystem services and are closely linked to human well-being. In this study, we propose a semi-analytical method, which can be applied to Sentinel-2 MultiSpectral Instrument (MSI) images to retrieve high spatial-resolution total suspended solids (TSS) concentration in a broad spectrum of aquatic ecosystems ranging from clear to extremely turbid waters. The presented approach has four main steps. First, the remote sensing reflectance (Rrs) at a band lacking in MSI (620 nm) is estimated through an empirical relationship from Rrs at 665 nm. Second, waters are classified into four types (clear, moderately turbid, highly turbid, and extremely turbid). Third, semi-analytical algorithms are used to estimate the particulate backscattering coefficient (bbp) at a reference band depending on the water types. Last, TSS is estimated from bbp at the reference band. Validation and comparison of the proposed method with three existing methods are performed using a simulated dataset (N = 1000), an in situ dataset collected from global inland and coastal waters (N = 1265) and satellite matchups (N = 40). Results indicate that the proposed method can improve TSS estimation and provide accurate retrievals of TSS from all three datasets, with a median absolute percentage error (MAPE) of 14.88 %, 31.50 % and 41.69 % respectively. We also present comparisons of TSS mapping between the Sentinel-3 Ocean and Land Colour Instrument (OLCI) and MSI in Lake Kasumigaura, Japan and the Tagus Estuary, Portugal. Results clearly demonstrate the advantages of using MSI for TSS monitoring in small water bodies such as rivers, river mouths and other nearshore waters. MSI can provide more detailed and realistic TSS estimates than OLCI in these water bodies. The proposed TSS estimation method was applied to MSI images to produce TSS time-series in Lake Kasumigaura, which showed good agreements with in situ and OLCI-derived TSS time-series