50 research outputs found

    Distinct expressions of the BSR using various frequencies offshore Uruguay and its correspondence with the gas hydrate stability zone

    Get PDF
    At the Uruguayan continental margin, seismic evidence for the occurrence of gas hydrate has been identified based on the presence of BSRs in densely spaced 2D reflection seismic sections from different surveys. Mapping of BSRs based on 2D seismic data acquired in 2007 and 2008 suggested the presence of gas hydrates in areas that were not previously identified; hence hydrate occurrence offshore Uruguay is more widespread than previously thought. Recently ANCAP has digitized offshore seismic data acquired between 1970 and 1982. Being able to work on this data using interpretation software, and integrating results with the latest interpretations performed on the seismic collected in 2007 and 2008, the BSR extends over an area of approximately 25.000 km2. It is present in water depths greater than 500 m and has high continuity in Pelotas Basin but is more discontinuous at Punta del Este Basin and southern part of Oriental del Plata Basin. In offshore basins around the world the base of GHSZ can have different seismic expressions such as continuous, segmented, and high-relief BSRs depending on the stratigraphic, fluid and geothermal setting. Here, we present examples of the influence of the acquisition parameters on the acoustic expression of the BSR, comparing commercial seismic sections acquired for hydrocarbon exploration and high resolution seismic sections acquired during the R/V Meteor Cruise M49/2 in 2001 and R/V Meteor Cruise M78/3a (May - June 2009) using different sources and streamer system. For the different data sets the BSR presents differences regarding its continuity and amplitude strength. In high resolution seismic, enhanced amplitudes and phase reversals are observed for several reflectors while deep penetration seismic shows only one single continuous reflector. This comparison may help to visualize the complexity of the free gas, gas hydrate and stratigraphic system behind the BSR, which is usually masked on low-frequency deep penetration seismic data

    A roadmap for amphibious drilling at the Campi Flegrei caldera: insights from a MagellanPlus workshop

    Get PDF
    Large calderas are among the Earth's major volcanic features. They are associated with large magma reservoirs and elevated geothermal gradients. Caldera-forming eruptions result from the withdrawal and collapse of the magma chambers and produce large-volume pyroclastic deposits and later-stage deformation related to post-caldera resurgence and volcanism. Unrest episodes are not always followed by an eruption; however, every eruption is preceded by unrest. The Campi Flegrei caldera (CFc), located along the eastern Tyrrhenian coastline in southern Italy, is close to the densely populated area of Naples. It is one of the most dangerous volcanoes on Earth and represents a key example of an active, resurgent caldera. It has been traditionally interpreted as a nested caldera formed by collapses during the 100–200 km3 Campanian Ignimbrite (CI) eruption at ∌39 ka and the 40 km3 eruption of the Neapolitan Yellow Tuff (NYT) at ∌15 ka. Recent studies have suggested that the CI may instead have been fed by a fissure eruption from the Campanian Plain, north of Campi Flegrei. A MagellanPlus workshop was held in Naples, Italy, on 25–28 February 2017 to explore the potential of the CFc as target for an amphibious drilling project within the International Ocean Discovery Program (IODP) and the International Continental Drilling Program (ICDP). It was agreed that Campi Flegrei is an ideal site to investigate the mechanisms of caldera formation and associated post-caldera dynamics and to analyze the still poorly understood interplay between hydrothermal and magmatic processes. A coordinated onshore–offshore drilling strategy has been developed to reconstruct the structure and evolution of Campi Flegrei and to investigate volcanic precursors by examining (a) the succession of volcanic and hydrothermal products and related processes, (b) the inner structure of the caldera resurgence, (c) the physical, chemical, and biological characteristics of the hydrothermal system and offshore sediments, and (d) the geological expression of the phreatic and hydromagmatic eruptions, hydrothermal degassing, sedimentary structures, and other records of these phenomena. The deployment of a multiparametric in situ monitoring system at depth will enable near-real-time tracking of changes in the magma reservoir and hydrothermal system

    ICDP workshop on scientific drilling of Nam Co on the Tibetan Plateau: 1 million years of paleoenvironmental history, geomicrobiology, tectonics and paleomagnetism derived from sediments of a high-altitude lake

    Get PDF
    The Tibetan Plateau is of peculiar societal relevance as it provides freshwater from the so-called “Water Tower of Asia” to a large portion of the Asian population. However, future climate change will affect the hydrological cycle in this area. To define parameters for future climate change scenarios it is necessary to improve the knowledge about thresholds, timing, pace and intensity of past climatic changes and associated environmental impacts. Sedimentary archives reaching far back in time and spanning several glacial–interglacial cycles such as Nam Co provide the unique possibility to extract such information. In order to explore the scientific opportunities that an ICDP drilling effort at Nam Co would provide, 40 scientists from 13 countries representing various scientific disciplines met in Beijing from 22 to 24 May 2018. Besides paleoclimatic investigations, opportunities for paleomagnetic, deep biosphere, tectonic and paleobiological studies were discussed. After having explored the technical and logistical challenges and the scientific opportunities all participants agreed on the great value and need to drill this extraordinary archive, which has a sediment thickness of more than 1 km, likely covering more than 1 Ma

    Geological development of the Limpopo Shelf (southern Mozambique) during the last sealevel cycle

    No full text
    Paleo-shorelines on continental shelves give insights into the complex development of coastlines during sealevel cycles. This study investigates the geologic development of the Limpopo Shelf during the last sealevel cycle using multichannel seismic and acoustic datasets acquired on the shelf in front of the Limpopo River mouth. A detailed investigation of seismic facies, shelf bathymetry, and a correlation to sea level revealed the presence of numerous submerged shorelines on the shelf. These shorelines are characterized by distinct topographic ridges and are interpreted as coastal dune ridges that formed in periods of intermittent sealevel still-/slowstand during transgression. The shorelines are preserved due to periods of rapid sealevel rise (melt water pulses) that led to the overstepping of the dune ridges as well as due to early cementation of accumulated sediments that increased the erosive resistance of the ridges. The high along-shelf variability of the submerged dune ridges is interpreted as a result of pre-existing topography affecting shoreline positions during transgression. The pre-existing topography is controlled by the underlying sedimentary deposits that are linked to varying fluvial sediment input at different points on the shelf. The numerous prominent submerged dune ridges form barriers for the modern fluvial sediment from the Limpopo River and dam sediment on the inner shelf. They may also facilitate along-shelf current-induced sediment transport.Deutsche Forschungsgemeinschaft http://dx.doi.org/10.13039/50110000165

    Geological development of the Limpopo Shelf (southern Mozambique) during the last sealevel cycle

    No full text
    <jats:title>Abstract</jats:title><jats:p>Paleo-shorelines on continental shelves give insights into the complex development of coastlines during sealevel cycles. This study investigates the geologic development of the Limpopo Shelf during the last sealevel cycle using multichannel seismic and acoustic datasets acquired on the shelf in front of the Limpopo River mouth. A detailed investigation of seismic facies, shelf bathymetry, and a correlation to sea level revealed the presence of numerous submerged shorelines on the shelf. These shorelines are characterized by distinct topographic ridges and are interpreted as coastal dune ridges that formed in periods of intermittent sealevel still-/slowstand during transgression. The shorelines are preserved due to periods of rapid sealevel rise (melt water pulses) that led to the overstepping of the dune ridges as well as due to early cementation of accumulated sediments that increased the erosive resistance of the ridges. The high along-shelf variability of the submerged dune ridges is interpreted as a result of pre-existing topography affecting shoreline positions during transgression. The pre-existing topography is controlled by the underlying sedimentary deposits that are linked to varying fluvial sediment input at different points on the shelf. The numerous prominent submerged dune ridges form barriers for the modern fluvial sediment from the Limpopo River and dam sediment on the inner shelf. They may also facilitate along-shelf current-induced sediment transport.</jats:p&gt

    Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

    No full text
    Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.<br/

    A hiatus in early Quaternary sediments documented in the magnetostratigraphic record of "Meteor" core 13519 from the eastern equatorial Atlantic

    No full text
    The sediments of a 10.67 m long piston core recovered from the Sierra Leone Rise ("Meteor" Core 13519) have been analysed for their paleomagnetic properties. Using detailed demagnetization techniques, the geomagnetic Brunhes/Matuyama boundary could be identified between 9.81 and 9.89 m sub-bottom. This is in excellent agreement with the oxygen isotope stratigraphy by SARNTHEIN et al., this volume. Down to this level, therefore, the average apparent accumulation rate amounts to 13.5 m/m.y. assuming an age of 0.73 m.y. for the reversal boundary (BERGGREN et al. 1983). A second transition in magnetization polarity was recognized between 10.51 and 10.54 m sub-bottom. According to its magnetic signature it was tentatively correlated to the beginning of the Jaramillo event (0.98 m.y.). This would imply that in the lowermost part of the core the apparent accumulation rate decreases to less than 20% of that found in the upper sequences. However, as obviously only a small portion of the Jaramillo event is recorded in the sediment column, a more plausible solution is to keep the overall sedimentation rate about constant by introducing a hiatus of some 2·105 years shortly after the lower Jaramillo/Matuyama reversal boundary. Alternative interpretations are also discussed

    Post-collapse evolution of a coastal caldera system: Insights from a 3D multichannel seismic survey from the Campi Flegrei caldera (Italy)

    No full text
    In this study we present the first 3D high-resolution multichannel seismic dataset from a (partly) submerged caldera setting, the Campi Flegrei caldera (CFc). Our work aims at examining the spatial and temporal evolution of the CFc since the last caldera-forming event, the Neapolitan Yellow Tuff (NYT, 15 ka) eruption. The main objectives are to investigate the caldera's shallow (< 200 m) subsurface structure and post-NYT-collapse (< 15 ka) deformational processes, the manifestation of magmatic and hydrothermal processes in the subsurface, as well as the volume, dispersal and explosivity of coastal post-collapse eruptions, thereby significantly advancing our current knowledge of the CFc. Our findings confirm the existence of a nested-caldera system comprising two caldera depressions bordered by an inner and a deeper (> 200 m) outer caldera ring-fault zone. The seismic data revealed that the NYT collapse occurred exclusively along the inner caldera ring-fault and that the related NYT caldera depression is filled with on average ~ 61 m of sediment deposited between 15 and 8.6 ka. The geometry of the inner ring-fault, consisting of four fault segments, seems to be strongly influenced by regional NW-SE and NE SW-trending faults. Furthermore, we found that the ring-faults have acted as pathway for the recent (< 3.7 ka) ascent of fluids (gases and liquids) and the emplacement of intrusions. We propose that the outer ring-fault zone, which likely formed in the course of the Campanian Ignimbrite (CI, 39 ka) eruption, has had the main control on the release and ascent of fluids. Overall, the caldera ring-faults represent key locations for the interconnection between the magmatic-hydrothermal systems and the surface and, thus, potentially represent future eruption sites as well as important fluid pathways during the recent unrest episodes. Furthermore, we reassessed the volume, dispersal, and explosivity of the post-collapse Nisida Bank (10.3–9.5 ka), Nisida Island (~ 3.98 ka), and Capo Miseno (3.7 ka) eruptions, yielding DRE values of 0.15 km3, 0.1 km3, and 0.08 km3, respectively, and an explosive magnitude of at least moderate-large scale (VEI 3). Our findings highlight that eruption volumes may be underestimated by 3 to 4 times if the submerged portion of a (partly) submerged caldera is not considered, implying severe consequences for the hazard and risk evaluation. The spatial response of the post-collapse (< 15 ka) depositional environment to volcanic activity, deformational processes and sea-level variations is presented in a comprehensive 3D evolutionary model

    Middle to Late Pleistocene Architecture and Stratigraphy of the Lower Bengal Fan—Integrating Multichannel Seismic Data and IODP Expedition 354 Results

    No full text
    Utilizing a novel data set of integrated high-resolution multichannel seismic data with IODP Expedition 354 drilling results, a Middle to Late Pleistocene stratigraphy for the lower Bengal Fan is developed. The study reveals a high lateral and temporal variability of deposition expressed by lateral shifts (often exceeding 100 km) between successive channel-levee systems (CLSs), which occurred on average every ~15 kyr independent from sea-level changes. The CLSs are embedded in sheeted sediments deposited out of unchannelized turbidity currents, which represent almost two thirds of the lower Bengal Fan sediments. On 100-kyr timescales, CLSs and sheeted/unchannelized sediments build up subfans, which alternately occupied the western and the eastern Bengal Fan, while the remaining area was draped by ~10 to 20 m-thick layers of background/hemipelagic sediments. Three subfans have been reconstructed: Subfan B (1.24–0.68 Ma) formed concurrently with the Middle Pleistocene Hemipelagic Layer, Subfan C (0.68–0.25 Ma) covered the entire study area, and Subfan D (0.25 Ma to recent) deposited concomitant with the Late Pleistocene Hemipelagic Layer. The continuous succession of subfans indicates an uninterrupted fan activity independent from sea-level cycles at least since the Middle Pleistocene. This remarkable independent behavior in terms of sediment supply has not been observed at the Amazon Fan but is in agreement with observations from the Congo Fan. Finally, the analysis of a complete cross section through the lower Bengal Fan reveals that almost half of the sediment represents sands, indicating that the lower Bengal Fan may not generally be classified as “mud rich” (≀30% sand)
    corecore