The influence of compression failure on the bending, impact bending and tensile strength of spruce wood and the evaluation of non-destructive methods for early detection

Bending strength (MOR) and bending Young's modulus (MOE) according to DIN 52186 and MOE calculated on the basis of eigenfrequency and sound velocity were tested on small clear wood specimens of Norway spruce wood with and without compression failure. One group of specimens was climatised in a normal climate of 20°C and 65% relative humidity, while the other group was stored for one month under water before testing. The MOR of specimens with compression failure decreased about 20% on average (normal climate and wet) compared with the specimens without compression failure. The MOE of the specimens with compression failure was reduced only minimally compared with the specimens without compression failure stored in a normal climate, but very distinct differences (more then 30%) were found under wet conditions. The MOE of the specimens with compression failure calculated on the basis of eigenfrequency and sound velocity were not reduced or only minimally compared with the specimens without compression failure. It is therefore not possible to detect compression failure and to determine reduction in MOR using eigenfrequency or sound velocity. In addition, impact bending (DIN 52189), tensile strength and tensile MOE (DIN 52188) were tested on small clear wood specimens of Norway spruce wood with and without compression failure. The specimens with compression failure revealed an average reduction in impact strength of about 40% and an average reduction in tensile strength of about 20% compared with the specimens without compression failure, whereas tensile MOE of the specimens with compression failure was not reduced compared with the specimens without compression failure. The detection of compression failure by computer tomography (CT) was tested on Norway spruce wood boards 10cm in thickness, and detection by optical scanner was tested on planed Norway spruce wood boards. CT recognised large compression failures easily, whereas the scanner was not able to detect the

Quantitative Cathodoluminescence Opens New Areas of Investigation in Semiconductor Research and Production

The increasing demand for new opto-electronics devices such as solar cells, laser diodes (LD), and high-brightness light-emitting diodes (HBLED), combined with the economic necessity to achieve lower energy consumption levels and higher device yields, is motivating researchers to develop new materials. The semiconductor industry is actively looking for alternatives to silicon, for example, to address new niche market applications in power devices. Constant efforts employed to reduce production costs are leading manufacturers to grow GaN on silicon substrate, creating new technical challenges, especially regarding the control of defect density on wafer. For all these reasons many studies are being initiated to improve understanding of the fundamental physical properties and behavior of compound semiconductor materials used in quantum wells, quantum dots and nanowire-like structures. Cathodoluminescence (CL) is a spectroscopy method that can generate reliable, quantitative, and stable data for research as well as prepare a basis for quality control during productio

First observation of strong OZI rule violation in πN\pi N interactions

The data of the CERN WA56 experiment that triggered the fast proton produced in the $\pi^{+}p$ and $\pi^{-}p$ interactions at beam momenta 20 GeV/c and 12 GeV/c, respectively, are used to analyse the final states $p_{f} \phi (\omega)\pi^{\pm}$. A large excess (up to two orders of magnitude) of the $\phi/\omega$ cross sections ratio over the OZI prediction is observed

Experimental methods for the analysis of the tensile behavior of concrete joints

Adhesion plays an important role in the evaluation of hydraulic structures with unreinforced concrete joints. The experimental determination of joint tensile strength as a quantifiable parameter is not standardized, resulting in a variety of test setups found in literature. The present paper highlights advantages and disadvantages of three of the most common tension tests for plain concrete and concrete joints through both theoretical and laboratory experimental analysis on specimens with artificial joints. Splitting tension tests were found to be inexpensive but tend to overestimate the adhesive strength of weak joints. Direct tension tests require an elaborate test setup but may yield information on the tension softening behavior. Pull-off tests stand out for their ability to yield in-situ results but deliver inconclusive results

The axonally secreted protein axonin-1 is a potent substratum for neurite growth

Axonin-1 is a neuronal glycoprotein occurring both as a membrane-bound and a secreted form. Membrane-bound axonin-1 is predominantly located in membranes of developing nerve fiber tracts and has recently been characterized as a cell adhesion molecule; the soluble form is secreted from axons and accumulates in the cerebrospinal fluid and the vitreous fluid of the eye. In the present study, we addressed the question as to whether secreted axonin-1 was released in a functionally competent form and we found that it strongly promotes neurite outgrowth when presented to neurons as an immobilized substratum. Neurite lengths elaborated by embryonic dorsal root ganglia neurons on axonin-1 were similar to those on the established neurite-promoting substrata L1 and laminin. Fab fragments of axonin-1 antibodies completely inhibited neurite growth on axonin-1, but not on other substrata. In soluble form, axonin-1 had an anti-adhesive effect, as revealed by perturbation of neurite fasciculation. In view of their structural similarity, we conclude that secreted and membrane-bound axonin-1 interact with the same growth-promoting neuritic receptor. The fact that secreted axonin-1 is functionally active, together with our previous findings that it is secreted from an internal cellular pool, suggests a functional dualism between membrane-bound and secreted axonin-1 at the site of secretion, which is most likely the growth cone. The secretion of adhesion molecules could represent a powerful and rapidly acting regulatory element of growth cone-neurite interactions in the control of neurite elongation, pathway selection, and possibly target recognition

Parameters of scalar resonances from the combined analysis of data on processes ππ→ππ,KKˉ,ηη\pi\pi\to\pi\pi,K\bar{K},\eta\eta and J/ψJ/\psi decays

A combined analysis of data on isoscalar S-wave processes $\pi\pi\to\pi\pi,K\overline{K},\eta\eta$ and on decays $J/\psi\to\phi\pi\pi,\phi K\overline{K}$ from the DM2, Mark III and BESIII collaborations is performed to study $f_0$ mesons. The method of analysis is based on analyticity and unitarity and uses an uniformization procedure. In the analysis limited only to the multi-channel $\pi\pi$-scattering data, two possible sets of parameters of the $f_0(500)$ were found: in both cases the mass was about 700 MeV but the total width was either about 600 or 930 MeV. The extension of the analysis using only the DM2 and Mark III data on the $J/\psi$ decays does not allow to choose between these sets. However, the data from BESIII on the di-pion mass distribution in the decay $J/\psi\to\phi\pi^+\pi^-$ clearly prefers the wider $f_0(500)$ state. Spectroscopic implications from results of the analysis are also discussed.Comment: the formalism is also described (text overlap) in arXiv:1108.3725; new extended analysis of data; revised PRD versio

Masses and widths of scalar-isoscalar multi-channel resonances from data analysis

Peculiarities of obtaining parameters for broad multi-channel resonances from data are discussed analyzing the experimental data on processes $\pi\pi\to\pi\pi,K\bar{K}$ in the $I^GJ^{PC}=0^+0^{++}$ channel in a model-independent approach based on analyticity and unitarity and using an uniformization procedure. We show that it is possible to obtain a good description of the $\pi\pi$ scattering data from the threshold to 1.89 GeV with parameters of resonances cited in the PDG tables as preferred. However, in this case, first, representation of the $\pi\pi$ background is unsatisfactory; second, the data on the coupled process $\pi\pi\to K\bar{K}$ are not well described even qualitatively above 1.15 GeV when using the resonance parameters from the only $\pi\pi$ scattering analysis. The combined analysis of these coupled processes is needed, which is carried out satisfactorily. Then both above-indicated flaws, related to the analysis of solely the $\pi\pi$-scattering, are cured. The most remarkable change of parameters with respect to the values of only $\pi\pi$ scattering analysis appears for the mass of the $f_0 (600)$ which is now in some accordance with the Weinberg prediction on the basis of mended symmetry and with an analysis using the large-$N_c$ consistency conditions between the unitarization and resonance saturation. The obtained $\pi\pi$-scattering length $a_0^0$ in case when we restrict to the analysis of the $\pi\pi$ scattering or consider so-called A-solution (with a lower mass and width of $f_0(600)$ meson) agrees well with prediction of chiral perturbation theory (ChPT) and with data extracted at CERN by the NA48/2 Collaboration from the analysis of the $K_{e4}$ decay and by the DIRAC Collaboration from the measurement of the $\pi^+\pi^-$ lifetime.Comment: 21 pages, 3 figures, 6 table

Picosecond Time-Resolved Cathodoluminescence to Probe Exciton Dynamics in α-Plane (Al,Ga)N/GaN Quantum Wells

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7-August 11, 201

Study of dimuon production in Indium-Indium collisions with the NA60 experiment

The NA60 experiment at the CERN-SPS is devoted to the study of dimuon production in heavy-ion and proton-nucleus collisions. We present preliminary results from the analysis of Indium-Indium collisions at 158 GeV per nucleon. The topics covered are low mass vector meson production, J/psi production and suppression, and the feasibility of the open charm measurement from the dimuon continuum in the mass range below the J/psi peak.Comment: Contribution at XXXXth Rencontres de Moriond, "QCD and High Energy Hadronic Interactions