38 research outputs found
E-commerce Business
Bakalářská práce vytváří návrh elektronického obchodu a marketingové strategie společnosti Crhák s.r.o. Analyzuje současný stav elektronického obchodu a porovnáním s moderními trendy a vývojem v oblasti e-commerce, přináší řešení na kvalitnější marketingovou propagaci a optimalizaci systému.Bachelor thesis creates a proposal of e-commerce business and e-marketing strategy for company Crhak Ltd. It analyzes the current state of e-commerce and with comparison to modern trends and developments in e-commerce brings a solution for better marketing strategy and optimalization for system.
Information System Efectiveness Assessment and Proposal for ICT Modification
Diplomová práce se soustředí na návrh změn pro potřeby dalšího rozvoje podnikání v obchodní firmě. Návrh změn bude vycházet ze závěrů provedené analýzy aktuálního stavu informačního systému a souvisejících procesů ve firmě. Navrhované změny budou zohledňovat požadavky firmy na informační systém a strategické cíle firmy.This thesis focuses on the draft amendments for further business development in the company. Draft amendments based on findings from the analysis of the current state of IS and related processes in the company. The proposed amendments will take place requirements on the company information system and the strategic goals of the company.
Vibration measurement using a high-speed camera
Moderní vysokorychlostní kamery umožňují nahrávat video ve vysokém rozlišení (HD)
snímkovací frekvencí vyšší než 1000 snímků za sekundu. Díky takto vysoké frekvenci snímkování jsou ve videu zaznamenány vibrace natáčených objektů. Pokud je video zpracováno
algoritmem pro zvětšení pohybu (motion amplification), je možné zaznamenané vibrace vidět
pouhým okem. Příspěvek se zabývá metodikou měření vibrací zařízení a staveb pomocí vysokorychlostní kamery využívající algoritmus pro zvětšení pohybu, diskutovány jsou přednosti
této zkušební metody i její limity.A state-of-the-art high-speed camera is capable of recording a video at more than 1000
frames per second (fps) at high definition (HD) resolution. Thanks to such a high frame rate,
vibrations of the captured objects are recorded in the video. The vibrations are invisible to the
naked eye unless the video is post-processed using a motion amplification algorithm. The motion amplification algorithm is introduced in this paper. Furthermore, a typical measurement
workflow is described and advantages and limits of the introduced method are discussed
Advanced computational modelling of tilting pad journal bearings
Kluzná ložiska s naklápěcími segmenty se používají k ukládání točivých strojů s vysokou
obvodovou rychlostí čepů hřídele. Ve výpočtech rotorové dynamiky se často zanedbává kmitání naklápěcích segmentů a síly přenášené ložiskem se linearizují. V příspěvku je představen
výpočtový model respektující nelineární charakter sil v mazacím filmu, uložení segmentů
a poddajnost segmentů i ložiskového tělesa. Model je schopen predikovat kmitání segmentů,
kavitaci v mazivu a opotřebení kluzných ploch.Tato publikace byla podpořena projektem TE01020068 Technologické agentury ČR a projektem SGS-2016-038 Západočeské univerzity v Plzni.Tilting pad bearings can be found in rotating machinery with high circumferential speeds of
journals. Vibrations of individual pads are usually neglected in rotordynamics simulations and
hydrodynamic forces acting in oil films are often linearized. A computational model which
respects non-linear properties of hydrodynamic forces, contact forces between the pads and
a bearing housing, and deformations of the pads and the housing is introduced in this paper.
The model can be used for the analysis of vibrational and tribological parameters including
wear of bearing surfaces
Influence of the Stator Winding Vibration on the Insulation System Lifetime
The article deals with establishing of natural frequencies at the stator endwinding in stage of design of the machine (generator) and then measurement of the mode shapes (modal analysis on a real machine)
Localization of impacts in machinery with the use of wavelet transform
Článek popisuje experimentální metodu, pomocí které lze lokalizovat rázy v obecné konstrukci. Měření vibrací v několika měřících bodech umožňuje stanovit čas, kdy rázová vlna
dorazí od místa buzení ke snímači. Rychlosti rázových vln směřujících k jednotlivým snímačům
se zdánlivě liší, protože obecná geometrie konstrukce ovlivňuje cestu rázové vlny mezi bodem
rázu a měřícím bodem. Ráz tedy není možné přesně lokalizovat pouhou triangulací a úloha se
řeší pomocí optimalizace. Přesnost optimalizace závisí na počátečních podmínkách a optimalizačních parametrech, proto je také studován a analyzován jejich vliv.This paper describes an experimental method that can be used to find the location of an
impact point in a general three-dimensional structure. Measuring vibrations at several measurement points allows determining when the shock wave arrives from the excitation/impact point
to the sensor. The velocities of the shock waves travelling to the sensors are seemingly different
because the general geometry of the structure affects the path of the shock wave between the
impact point and each sensor. For this reason, the impact point cannot be accurately localized
by triangulation methods, and the problem is solved by constrained optimization. The accuracy
of this method depends on initial conditions and optimization parameters, so their influence is
also studied and analyzed
Spragging and pad fluttering – abnormal conditions during the operation of tilt-pad journal bearings
Radiální kluzná ložiska s naklápěcími segmenty jsou využívána pro ukládání strojů s vyso-
kou obvodovou rychlostí čepu hřídele. Speciální konstrukce těchto ložisek zabraňuje vzniku
nestability olejového filmu, na druhou stranu ale vytváří podmínky pro jevy známé jako poskoky a třepotání segmentů, které mohou poškodit součásti ložiska. Tento článek si klade za cíl
rozšířit povědomí o těchto jevech, popsat mechanismus jejich vzniku a způsob diagnostiky.Program THÉTA při řešení projektu TK04020057Radial tilt-pad journal bearings are used to support machinery with journals of high circumferential speed. A unique design of these bearings prevents the formation of oil-induced instability. However, the design allows for so-called pad spragging and fluttering, which can damage
bearing components. This paper aims to increase awareness of these phenomena, describe the
conditions leading to their formation, and present methods to detect them
Post-processing techniques for response of non-linear systems
Challenges in modern engineering require implementation of more and more complex computational models. The
computational models are often non-linear and even a slight modification of a design parameter can cause qualitative changes
in a predicted response. Several visualisation methods which improve the understanding of such changes are presented in this
paper. All proposed methods are illustrated with plots and diagrams and moreover, Matlab codes which were used in order to
generate the illustrations are shown and discussed
Information System Efectiveness Assessment and Proposal for ICT Modification
This thesis focuses on the draft amendments for further business development in the company. Draft amendments based on findings from the analysis of the current state of IS and related processes in the company. The proposed amendments will take place requirements on the company information system and the strategic goals of the company