181 research outputs found

    Efficient and Fast Synthesis of Few-Layer Black Phosphorus via Microwave-Assisted Liquid-Phase Exfoliation

    Full text link
    High‐quality, few‐layer black‐phosphorus (BP) flakes are prepared in a common organic solvent with very short processing times using microwave‐assisted liquid‐phase exfoliation. A comprehensive range of analysis, combined with density‐functional theory calculations, confirms that the product prepared using the microwave technique is few‐layer BP with small‐ and large‐area flakes. The suspended exfoliated BP sheets show excellent stability, while samples dispersed onto silicon from the suspensions exhibit low oxidation levels after several days in ambient conditions. This straightforward synthesis method is facile, efficient, and extremely fast, and does not involve use of any surfactant or ultrasonication steps and will facilitate future development of phosphorene research

    Quantum Transduction of Telecommunications-band Single Photons from a Quantum Dot by Frequency Upconversion

    Full text link
    The ability to transduce non-classical states of light from one wavelength to another is a requirement for integrating disparate quantum systems that take advantage of telecommunications-band photons for optical fiber transmission of quantum information and near-visible, stationary systems for manipulation and storage. In addition, transducing a single-photon source at 1.3 {\mu}m to visible wavelengths for detection would be integral to linear optical quantum computation due to the challenges of detection in the near-infrared. Recently, transduction at single-photon power levels has been accomplished through frequency upconversion, but it has yet to be demonstrated for a true single-photon source. Here, we transduce the triggered single-photon emission of a semiconductor quantum dot at 1.3 {\mu}m to 710 nm with a total detection (internal conversion) efficiency of 21% (75%). We demonstrate that the 710 nm signal maintains the quantum character of the 1.3 {\mu}m signal, yielding a photon anti-bunched second-order intensity correlation, g^(2)(t), that shows the optical field is composed of single photons with g^(2)(0) = 0.165 < 0.5.Comment: 7 pages, 4 figure

    Colon cancer controls versus population controls in case-control studies of occupational risk factors

    Get PDF
    BACKGROUND: Since updated population registers do not exist in many countries it is often difficult to sample valid population controls from the study base to a case-control study. Use of patient controls is an alternative option if the exposure experience under study for these patients are interchangeable with the experience for population controls. Patient controls may even be preferable from population controls under certain conditions. In this study we examine if colon cancer patients can serve as surrogates for proper population controls in case-control studies of occupational risk factors. METHODS: The study was conducted from 1995 to 1997. Incident colon cancer controls (N = 428) aged 35–69 years with a histological verified diagnosis and population controls (N = 583) were selected. Altogether 254 (59%) of the colon cancer controls and 320 (55%) of the population controls were interviewed about occupational, medical and life style conditions. RESULTS: No statistical significant difference for educational level, medical history or smoking status was seen between the two control groups. There was evidence of a higher alcohol intake, less frequent work as a farmer and less exposure to pesticides among colon cancer controls. CONCLUSIONS: Use of colon cancer controls may provide valid exposure estimates in studies of many occupational risk factors for cancer, but not for studies on exposure related to farming

    Case-control study for colorectal cancer genetic susceptibility in EPICOLON: previously identified variants and mucins

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Colorectal cancer (CRC) is the second leading cause of cancer death in developed countries. Familial aggregation in CRC is also important outside syndromic forms and, in this case, a polygenic model with several common low-penetrance alleles contributing to CRC genetic predisposition could be hypothesized. Mucins and GALNTs (N-acetylgalactosaminyltransferase) are interesting candidates for CRC genetic susceptibility and have not been previously evaluated. We present results for ten genetic variants linked to CRC risk in previous studies (previously identified category) and 18 selected variants from the mucin gene family in a case-control association study from the Spanish EPICOLON consortium.</p> <p>Methods</p> <p>CRC cases and matched controls were from EPICOLON, a prospective, multicenter, nationwide Spanish initiative, comprised of two independent stages. Stage 1 corresponded to 515 CRC cases and 515 controls, whereas stage 2 consisted of 901 CRC cases and 909 controls. Also, an independent cohort of 549 CRC cases and 599 controls outside EPICOLON was available for additional replication. Genotyping was performed for ten previously identified SNPs in <it>ADH1C</it>, <it>APC</it>, <it>CCDN1</it>, <it>IL6</it>, <it>IL8</it>, <it>IRS1</it>, <it>MTHFR</it>, <it>PPARG</it>, <it>VDR </it>and <it>ARL11</it>, and 18 selected variants in the mucin gene family.</p> <p>Results</p> <p>None of the 28 SNPs analyzed in our study was found to be associated with CRC risk. Although four SNPs were significant with a <it>P</it>-value < 0.05 in EPICOLON stage 1 [rs698 in <it>ADH1C </it>(OR = 1.63, 95% CI = 1.06-2.50, <it>P</it>-value = 0.02, recessive), rs1800795 in <it>IL6 </it>(OR = 1.62, 95% CI = 1.10-2.37, <it>P</it>-value = 0.01, recessive), rs3803185 in <it>ARL11 </it>(OR = 1.58, 95% CI = 1.17-2.15, <it>P</it>-value = 0.007, codominant), and rs2102302 in <it>GALNTL2 </it>(OR = 1.20, 95% CI = 1.00-1.44, <it>P</it>-value = 0.04, log-additive 0, 1, 2 alleles], only rs3803185 achieved statistical significance in EPICOLON stage 2 (OR = 1.34, 95% CI = 1.06-1.69, <it>P</it>-value = 0.01, recessive). In the joint analysis for both stages, results were only significant for rs3803185 (OR = 1.12, 95% CI = 1.00-1.25, <it>P</it>-value = 0.04, log-additive 0, 1, 2 alleles) and borderline significant for rs698 and rs2102302. The rs3803185 variant was not significantly associated with CRC risk in an external cohort (MCC-Spain), but it still showed some borderline significance in the pooled analysis of both cohorts (OR = 1.08, 95% CI = 0.98-1.18, <it>P</it>-value = 0.09, log-additive 0, 1, 2 alleles).</p> <p>Conclusions</p> <p><it>ARL11</it>, <it>ADH1C</it>, <it>GALNTL2 </it>and <it>IL6 </it>genetic variants may have an effect on CRC risk. Further validation and meta-analyses should be undertaken in larger CRC studies.</p

    Acoustic Cues for Sound Source Distance and Azimuth in Rabbits, a Racquetball and a Rigid Spherical Model

    Get PDF
    There are numerous studies measuring the transfer functions representing signal transformation between a source and each ear canal, i.e., the head-related transfer functions (HRTFs), for various species. However, only a handful of these address the effects of sound source distance on HRTFs. This is the first study of HRTFs in the rabbit where the emphasis is on the effects of sound source distance and azimuth on HRTFs. With the rabbit placed in an anechoic chamber, we made acoustic measurements with miniature microphones placed deep in each ear canal to a sound source at different positions (10–160 cm distance, ±150° azimuth). The sound was a logarithmically swept broadband chirp. For comparisons, we also obtained the HRTFs from a racquetball and a computational model for a rigid sphere. We found that (1) the spectral shape of the HRTF in each ear changed with sound source location; (2) interaural level difference (ILD) increased with decreasing distance and with increasing frequency. Furthermore, ILDs can be substantial even at low frequencies when distance is close; and (3) interaural time difference (ITD) decreased with decreasing distance and generally increased with decreasing frequency. The observations in the rabbit were reproduced, in general, by those in the racquetball, albeit greater in magnitude in the rabbit. In the sphere model, the results were partly similar and partly different than those in the racquetball and the rabbit. These findings refute the common notions that ILD is negligible at low frequencies and that ITD is constant across frequency. These misconceptions became evident when distance-dependent changes were examined

    Effects of selective serotonin reuptake inhibitor treatment on plasma oxytocin and cortisol in major depressive disorder

    Get PDF
    Background: Oxytocin is known for its capacity to facilitate social bonding, reduce anxiety and for its actions on the stress hypothalamopituitary adrenal (HPA) axis. Since oxytocin can physiologically suppress activity of the HPA axis, clinical applications of this neuropeptide have been proposed in conditions where the function of the HPA axis is dysregulated. One such condition is major depressive disorder (MDD). Dysregulation of the HPA system is the most prominent endocrine change seen with MDD, and normalizing the HPA axis is one of the major targets of recent treatments. The potential clinical application of oxytocin in MDD requires improved understanding of its relationship to the symptoms and underlying pathophysiology of MDD. Previous research has investigated potential correlations between oxytocin and symptoms of MDD, including a link between oxytocin and treatment related symptom reduction. The outcomes of studies investigating whether antidepressive treatment (pharmacological and non-pharmacological) influences oxytocin concentrations in MDD, have produced conflicting outcomes. These outcomes suggest the need for an investigation of the influence of a single treatment class on oxytocin concentrations, to determine whether there is a relationship between oxytocin, the HPA axis (e.g., oxytocin and cortisol) and MDD. Our objective was to measure oxytocin and cortisol in patients with MDD before and following treatment with selective serotonin reuptake inhibitors, SSRI. Method: We sampled blood from arterial plasma. Patients with MDD were studied at the same time twice; pre- and post- 12 weeks treatment, in an unblinded sequential design (clinicaltrials.govNCT00168493). Results: Results did not reveal differences in oxytocin or cortisol concentrations before relative to following SSRI treatment, and there were no significant relationships between oxytocin and cortisol, or these two physiological variables and psychological symptom scores, before or after treatment. Conclusions: These outcomes demonstrate that symptoms of MDD were reduced following effective treatment with an SSRI, and further, stress physiology was unlikely to be a key factor in this outcome. Further research is required to discriminate potential differences in underlying stress physiology for individuals with MDD who respond to antidepressant treatment, relative to those who experience treatment resistance.Charlotte Keating, Tye Dawood, David A Barton, Gavin W Lambert and Alan J Tilbroo

    Search for Kaluza-Klein Graviton Emission in ppˉp\bar{p} Collisions at s=1.8\sqrt{s}=1.8 TeV using the Missing Energy Signature

    Get PDF
    We report on a search for direct Kaluza-Klein graviton production in a data sample of 84 pb1{pb}^{-1} of \ppb collisions at s\sqrt{s} = 1.8 TeV, recorded by the Collider Detector at Fermilab. We investigate the final state of large missing transverse energy and one or two high energy jets. We compare the data with the predictions from a 3+1+n3+1+n-dimensional Kaluza-Klein scenario in which gravity becomes strong at the TeV scale. At 95% confidence level (C.L.) for nn=2, 4, and 6 we exclude an effective Planck scale below 1.0, 0.77, and 0.71 TeV, respectively.Comment: Submitted to PRL, 7 pages 4 figures/Revision includes 5 figure

    Measurement of the average time-integrated mixing probability of b-flavored hadrons produced at the Tevatron

    Get PDF
    We have measured the number of like-sign (LS) and opposite-sign (OS) lepton pairs arising from double semileptonic decays of bb and bˉ\bar{b}-hadrons, pair-produced at the Fermilab Tevatron collider. The data samples were collected with the Collider Detector at Fermilab (CDF) during the 1992-1995 collider run by triggering on the existence of μμ\mu \mu and eμe \mu candidates in an event. The observed ratio of LS to OS dileptons leads to a measurement of the average time-integrated mixing probability of all produced bb-flavored hadrons which decay weakly, χˉ=0.152±0.007\bar{\chi} = 0.152 \pm 0.007 (stat.) ±0.011\pm 0.011 (syst.), that is significantly larger than the world average χˉ=0.118±0.005\bar{\chi} = 0.118 \pm 0.005.Comment: 47 pages, 10 figures, 15 tables Submitted to Phys. Rev.

    The utility and predictive value of combinations of low penetrance genes for screening and risk prediction of colorectal cancer

    Get PDF
    Despite the fact that colorectal cancer (CRC) is a highly treatable form of cancer if detected early, a very low proportion of the eligible population undergoes screening for this form of cancer. Integrating a genomic screening profile as a component of existing screening programs for CRC could potentially improve the effectiveness of population screening by allowing the assignment of individuals to different types and intensities of screening and also by potentially increasing the uptake of existing screening programs. We evaluated the utility and predictive value of genomic profiling as applied to CRC, and as a potential component of a population-based cancer screening program. We generated simulated data representing a typical North American population including a variety of genetic profiles, with a range of relative risks and prevalences for individual risk genes. We then used these data to estimate parameters characterizing the predictive value of a logistic regression model built on genetic markers for CRC. Meta-analyses of genetic associations with CRC were used in building science to inform the simulation work, and to select genetic variants to include in logistic regression model-building using data from the ARCTIC study in Ontario, which included 1,200 CRC cases and a similar number of cancer-free population-based controls. Our simulations demonstrate that for reasonable assumptions involving modest relative risks for individual genetic variants, that substantial predictive power can be achieved when risk variants are common (e.g., prevalence > 20%) and data for enough risk variants are available (e.g., ~140–160). Pilot work in population data shows modest, but statistically significant predictive utility for a small collection of risk variants, smaller in effect than age and gender alone in predicting an individual’s CRC risk. Further genotyping and many more samples will be required, and indeed the discovery of many more risk loci associated with CRC before the question of the potential utility of germline genomic profiling can be definitively answered

    Laying waste to mercury: inexpensive sorbents made from sulfur and recycled cooking oils

    Get PDF
    Mercury pollution threatens the environment and human health across the globe. This neurotoxic substance is encountered in artisanal gold mining, coal combustion, oil and gas refining, waste incineration, chloralkali plant operation, metallurgy, and areas of agriculture in which mercury-rich fungicides are used. Thousands of tonnes of mercury are emitted annually through these activities. With the Minamata Convention on Mercury entering force this year, increasing regulation of mercury pollution is imminent. It is therefore critical to provide inexpensive and scalable mercury sorbents. The research herein addresses this need by introducing low-cost mercury sorbents made solely from sulfur and unsaturated cooking oils. A porous version of the polymer was prepared by simply synthesising the polymer in the presence of a sodium chloride porogen. The resulting material is a rubber that captures liquid mercury metal, mercury vapour, inorganic mercury bound to organic matter, and highly toxic alkylmercury compounds. Mercury removal from air, water and soil was demonstrated. Because sulfur is a by-product of petroleum refining and spent cooking oils from the food industry are suitable starting materials, these mercury-capturing polymers can be synthesised entirely from waste and supplied on multi-kilogram scales. This study is therefore an advance in waste valorisation and environmental chemistry.Max J. H. Worthington, Renata L. Kucera, Inês S. Albuquerque, Christopher T. Gibson, Alexander Sibley, Ashley D. Slattery, Jonathan A. Campbell, Salah F. K. Alboaiji, Katherine A. Muller, Jason Young, Nick Adamson, Jason R. Gascooke, Deshetti Jampaiah, Ylias M. Sabri, Suresh K. Bhargava, Samuel J. Ippolito, David A. Lewis, Jamie S. Quinton, Amanda V. Ellis, Alexander Johs, Gonçalo J.L. Bernardes and Justin M. Chalke
    corecore