Impacts of mindfulness on disruptive behaviors associated with characteristics of ADHD

The prevalence of ADHD has drastically increased over the last decade, and children with this disorder often receive attention from their teachers for their disruptive behaviors (Visser, Danielson, Bitsko, Holbrook, Kogan, Ghandour,... & Blumberg, 2014). Students with ADHD often struggle with controlling their impulses that lead to these disruptions in the classroom. If not addressed, the classroom learning environment is likely to be negatively impacted (Lambert, Cartledge, Heward, & Lo, 2006). Introducing students with ADHD to the practice of mindfulness may help to create a space, or a delay in responding, between thoughts and actions which may, in turn, reduce the amount of disruptive behaviors teachers must manage in the classroom. The following literature will describe mindfulness and its implementation in the K-12 setting; and then, describe ADHD symptoms and how mindfulness is used to address these symptoms

Tables for Supersonic Flow Around Right Circular Cones at Small Angle of Attack

The solution of supersonic flow fields by the method of characteristics requires that starting conditions be known. Ferri, in reference 1, developed a method-of-characteristics solution for axially symmetric bodies of revolution at small angles of attack. With computing machinery that is now available, this has become a feasible method for computing the aerodynamic characteristics of bodies near zero angle of attack. For sharp-nosed bodies of revolution, the required starting line may be obtained by computing the flow field about a cone at a small angle of attack. This calculation is readily performed using Stone's theory in reference 2. Some solutions of this theory are available in reference 3. However, the manner in which these results are presented, namely in a wind-fixed coordinate system, makes their use somewhat cumbersome. Additionally, as pointed out in reference 4, the flow component perpendicular to the meridian planes was computed incorrectly. The results contained herein have been computed in the same basic manner as those of reference 3 with the correct velocity normal to the meridian planes. Also, all results have been transferred into the body-fixed coordinate system. Therefore, the values tabulated herein may be used, in conjunction with the respective zero-angle-of-attack results of reference 5, as starting conditions for the method-of-characteristics solution of the flow field about axially symmetric bodies of revolution at small angles of attack. As in the zero-angle-of-attack case (ref. 5) the present results have been computed using the ideal gas value of 1.4 for the ratio of the specific heats of air. Solutions are given for cone angles from 2.5 deg to 30 deg in increments of 2.5 deg. For each cone angle, results were computed for a constant series of free-stream Mach numbers from 1.5 to 20. In addition, a solution was computed which yielded the minimum free-stream Mach number for a completely supersonic conical flow field. For cone angles of 27.5 deg and 30 deg, this minimum free-stream Mach number was above 1.5. Consequently, solutions at this Mach number were not computed for these two cone angles

A theoretical investigation of the effect of partial wing lift of hydrodynamic landing characteristics of V-bottom seaplanes in step impacts

A theoretical investigation is made of the loads and motions in water-landing impacts of wide prismatic V-bottom seaplanes for constant partial wing-lift conditions where the resultant velocity of the seaplane is normal to the keel. An approximate method is given for applying the results of this investigation to the more general case of oblique impact. The increase in vertical hydrodynamic load factor due to wing-lift reduction is shown to be approximately 133 percent of the decrease in air load

In Situ Bioremediation of Contaminated Unsaturated Subsurface Soils

An emerging technology for the remediation of unsaturated subsurface soils involves the use of microorganisms to degrade contaminants which are present in such soils. Understanding the processes which drive in situ bioremediation, as well as the effectiveness and efficiency of the utilization of these systems, are issues which have been identified by the Regional Superfund Engineering Forum as concerns of Superfund decision makers

Tactically Extensible and Modular Communications - X-Band TEMCOM-X

This paper will discuss a proposed CubeSat size (3U) telemetry system concept being developed at Marshall Space Flight Center (MSFC) in cooperation with the U.S. Department of the Army and Dynetics Corporation. This telemetry system incorporates efficient, high-bandwidth communications by developing flight-ready, low-cost, Protoflight software defined radio (SDR) and Electronically Steerable Patch Array (ESPA) antenna subsystems for use on platforms as small as CubeSats and unmanned aircraft systems (UASs). The current telemetry system is slightly larger in dimension of footprint than required to fit within a 0.5U CubeSat volume. Extensible and modular communications for CubeSat technologies will partially mitigate current capability gaps between traditional strategic space platforms and lower-cost small satellite solutions. Higher bandwidth capacity will enable high-volume, low error-rate data transfer to and from tactical forces or sensors operating in austere locations (e.g., direct imagery download, unattended ground sensor data exfiltration, interlink communications), while also providing additional bandwidth and error correction margin to accommodate more complex encryption algorithms and higher user volume

Benchtop micromolding of polystyrene by soft lithography

Polystyrene (PS), a standard material for cell culture consumable labware, was molded into microstructures with high fidelity of replication by an elastomeric polydimethylsiloxane (PDMS) mold. The process was a simple, benchtop method based on soft lithography using readily available materials. The key to successful replica molding by this simple procedure relies on the use of a solvent, for example, gamma-butyrolactone, which dissolves PS without swelling the PDMS mold. PS solution was added to the PDMS mold, and evaporation of solvent was accomplished by baking the mold on a hotplate. Microstructures with feature sizes as small as 3 µm and aspect ratios as large as 7 were readily molded. Prototypes of microfluidic chips made from PS were prepared by thermal bonding of a microchannel molded in PS with a flat PS substrate. The PS microfluidic chip displayed much lower adsorption and absorption of hydrophobic molecules (e.g. rhodamine B) compared to a comparable chip created from PDMS. The molded PS surface exhibited stable surface properties after plasma oxidation as assessed by contact angle measurement. The molded, oxidized PS surface remained an excellent surface for cell culture based on cell adhesion and proliferation. The micromolded PS possessed properties that were ideal for biological and bioanalytical needs, thus making it an alternative material to PDMS and suitable for building lab-on-a-chip devices by soft lithography methods

The reproducibility of 10 and 20km time trial cycling performance in recreational cyclists, runners and team sport athletes

Objectives: This study aimed to determine the reliability of 10 and 20 km cycling time trial (TT) performance on the Velotron Pro in recreational cyclists, runners and intermittent-sprint based team sport athletes, with and without a familiarisation. Design: Thirty-one male, recreationally active athletes completed four 10 or 20 km cycling TTs on different days. Methods: During cycling, power output, speed and cadence were recorded at 23 Hz, and heart rate and rating of perceived exertion (RPE) were recorded every km. Multiple statistical methods were used to ensure a comprehensive assessment of reliability. Intraclass correlations, standard error of the measurement, minimum difference required for a worthwhile change and coefficient of variation were determined for completion time and mean trial variables (power output, speed, cadence, heart rate, RPE, session RPE). Results: A meaningful change in performance for cyclists, runners, team sport athletes would be represented by 7.5, 3.6 and 12.9% improvement for 10 km and a 4.9, 4.0 and 5.6% for 20 km completion time. After a familiarisation, a 4.0, 3.7 and 6.4% improvement for 10 km and a 4.1, 3.0 and 4.4% would be required for 20 km. Conclusions: Data from this study suggest not all athletic subgroups require a familiarisation to produce substantially reliable 10 and 20 km cycling performance. However, a familiarisation considerably improves the reliability of pacing strategy adopted by recreational runners and team sport athletes across these distances

Severe Acute Respiratory Syndrome Coronavirus 2 Reinfection: A Case Series From a 12-Month Longitudinal Occupational Cohort

Findings are described in 7 patients with severe acute respiratory syndrome coronavirus 2 reinfection from the National Basketball Association 2020-2021 occupational testing cohort, including clinical details, antibody test results, genomic sequencing, and longitudinal reverse-transcription polymerase chain reaction results. Reinfections were infrequent and varied in clinical presentation, viral dynamics, and immune response

CD98hc facilitates B cell proliferation and adaptive humoral immunity.

The proliferation of antigen-specific lymphocytes and resulting clonal expansion are essential for adaptive immunity. We report here that B cell-specific deletion of the heavy chain of CD98 (CD98hc) resulted in lower antibody responses due to total suppression of B cell proliferation and subsequent plasma cell formation. Deletion of CD98hc did not impair early B cell activation but did inhibit later activation of the mitogen-activated protein kinase Erk1/2 and downregulation of the cell cycle inhibitor p27. Reconstitution of CD98hc-deficient B cells with CD98hc mutants showed that the integrin-binding domain of CD98hc was required for B cell proliferation but that the amino acid-transport function of CD98hc was dispensable for this. Thus, CD98hc supports integrin-dependent rapid proliferation of B cells. We propose that the advantage of adaptive immunity favored the appearance of CD98hc in vertebrates

Comparative RNAi screening identifies a conserved core metazoan actinome by phenotype

RNAi Screens in Drosophila and human cells for novel actin regulators revealed conserved roles for proteins involved in nuclear actin export, RNA splicing, and ubiquitination