5,317 research outputs found
Recent developments in X-ray diffraction/scattering computed tomography for materials science
X-ray diffraction/scattering computed tomography (XDS-CT) methods are a non-destructive class of chemical imaging techniques that have the capacity to provide reconstructions of sample cross-sections with spatially resolved chemical information. While X-ray diffraction CT (XRD-CT) is the most well-established method, recent advances in instrumentation and data reconstruction have seen greater use of related techniques like small angle X-ray scattering CT and pair distribution function CT. Additionally, the adoption of machine learning techniques for tomographic reconstruction and data analysis are fundamentally disrupting how XDS-CT data is processed. The following narrative review highlights recent developments and applications of XDS-CT with a focus on studies in the last five years. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'
Oscillating epidemics in a dynamic network model: stochastic and mean-field analysis
An adaptive network model using SIS epidemic propagation with link-type-dependent link activation and deletion is considered. Bifurcation analysis of the pairwise ODE approximation and the network-based stochastic simulation is carried out, showing that three typical behaviours may occur; namely, oscillations can be observed besides disease-free or endemic steady states. The oscillatory behaviour in the stochastic simulations is studied using Fourier analysis, as well as through analysing the exact master equations of the stochastic model. By going beyond simply comparing simulation results to mean-field models, our approach yields deeper insights into the observed phenomena and help better understand and map out the limitations of mean-field models
The Brighton declaration: the value of non-communicable disease modelling in population health sciences.
The Brighton declaration arose out of a one day workshop
held in Brighton in September 2013 as part of the Society
for Social Medicine annual conference. The workshop
convened UK based non-communicable disease modellers
to discuss the challenges and opportunities for non-communicable
disease modelling in the UK. The declaration
describes the value and importance of non-communicable
disease modelling, both for research and for informing
health policy. The declaration also describes challenges
and issues for non-communicable disease modelling. The
declaration has been endorsed by many non-communicable
disease modellers in the UK.The following academics collaborated with the
authors to finalise this article are and acknowledged as co-signatories
on its content. The authors are extremely grateful for their input.
University of Cambridge: Ali Abbas, Marko Tanio; University of
Edinburgh: Dr Susannah McLean; UK Health Forum: Martin Brown,
Tim Marsh, Marco Mesa-Frias, Lise Retat; Imperial College London:
Anthony Laverty; The London School of Hygiene and Tropical
Medicine: Zaid Chalabi; University College London: Luz Sanchez
Romero; University of Oxford: Anja Mizdrak, Mike Rayner, Marco
Springmann; University of Sheffield: Alan Brennan, James Chilcott,
John Holmes, Petra Meier, John Mooney; University of Southampton:
Grant Aitken. ADMB and OTM are funded by the Wellcome Trust.
PS is funded by the British Heart Foundation. JW is funded by an
MRC Population Health Scientist Fellowship.This is the final published version. The article was originally published in the European Journal of Epidemiology (2014) 29, 867–870, DOI 10.1007/s10654-014-9978-0
An experimental test of non-local realism
Most working scientists hold fast to the concept of 'realism' - a viewpoint
according to which an external reality exists independent of observation. But
quantum physics has shattered some of our cornerstone beliefs. According to
Bell's theorem, any theory that is based on the joint assumption of realism and
locality (meaning that local events cannot be affected by actions in space-like
separated regions) is at variance with certain quantum predictions. Experiments
with entangled pairs of particles have amply confirmed these quantum
predictions, thus rendering local realistic theories untenable. Maintaining
realism as a fundamental concept would therefore necessitate the introduction
of 'spooky' actions that defy locality. Here we show by both theory and
experiment that a broad and rather reasonable class of such non-local realistic
theories is incompatible with experimentally observable quantum correlations.
In the experiment, we measure previously untested correlations between two
entangled photons, and show that these correlations violate an inequality
proposed by Leggett for non-local realistic theories. Our result suggests that
giving up the concept of locality is not sufficient to be consistent with
quantum experiments, unless certain intuitive features of realism are
abandoned.Comment: Minor corrections to the manuscript, the final inequality and all its
conclusions do not change; description of corrections (Corrigendum) added as
new Appendix III; Appendix II replaced by a shorter derivatio
Unhatched eggs represent the invisible fraction in two wild bird populations
Prenatal mortality is typically overlooked in population studies, which biases evolutionary inference by confounding selection and inheritance. Birds represent an opportunity to include this ‘invisible fraction’ if each egg contains a zygote, but whether hatching failure is caused by fertilization failure versus prenatal mortality is largely unknown. We quantified fertilization failure rates in two bird species that are popular systems for studying evolutionary dynamics and found that overwhelming majorities (99.9%) of laid eggs were fertilized. These systems thus present opportunities to eliminate the invisible fraction from life-history data
The effects of dynamical substructure on Milky Way mass estimates from the high-velocity tail of the local stellar halo
We investigate the impact of dynamical streams and substructure on estimates of the local escape speed and total mass of Milky-Way-mass galaxies from modelling the high-velocity tail of local halo stars. We use a suite of high-resolution magnetohydrodynamical cosmological zoom-in simulations that resolve phase space substructure in local volumes around solar-like positions. We show that phase space structure varies significantly between positions in individual galaxies and across the suite. Substructure populates the high-velocity tail unevenly and leads to discrepancies in the mass estimates. We show that a combination of streams, sample noise, and truncation of the high-velocity tail below the escape speed leads to a distribution of mass estimates with a median that falls below the true value by ∼20 per cent ∼20 per cent , and a spread of a factor of 2 across the suite. Correcting for these biases, we derive a revised value for the Milky Way mass presented in Deason et al. of 1.29 +0.37 −0.47 × 10 12 M ⊙ 1.29−0.47+0.37×1012M⊙
Following Cu Microstructure Evolution in CuZnO/Al_{2}O_{3}(−Cs) Catalysts During Activation in H_{2} using in situ XRD and XRD-CT
Understanding how the microstructure of the active Cu0 component in the commercially applicable Cu/ZnO/Al_{2}O_{3}(−Cs_{2}O) low-temperature water-gas shift catalyst evolves under various H_{2} partial pressures in the presence/absence of a Cs promoter during thermal activation has been investigated. Time-resolved XRD and spatially-resolved XRD-CT data were measured as a function of H_{2} concentration along a packed bed reactor to elucidate the importance of the zincite support and the effect of the promoter on Cu sintering mechanisms, dislocation character and stacking fault probability. The rate of Cu reduction showed a dependency on [Cs], [H_{2}] and bed height; lower [Cs] and higher [H_{2}] led to a greater rate of metallic copper nanoparticle formation. A deeper analysis of the XRD line profiles allowed for determining a greater edge character to the dislocations and subsequent stacking fault probability was also observed to depend on higher [H_{2}], Cu^{0} (and ZnO) crystallite sizes, increased [ZnO] (30 wt.%, sCZA) and lower temperature. The intrinsic activity of Cu/ZnO/Al_{2}O_{3} methanol synthesis catalysts has been intimately linked to the anisotropic behaviour of copper, and thus the presence of lattice defects; to the best knowledge of the authors, this study is the first instance in which this type of analysis has been applied to LT-WGS catalysts
Unraveling the Complex Solid-State Phase Transition Behavior of 1-Iodoadamantane, a Material for Which Ostensibly Identical Crystals Undergo Different Transformation Pathways
Phase transitions in crystalline molecular solids have important implications in the fundamental understanding of materials properties and in the development of materials applications. Herein, we report the solid-state phase transition behavior of 1-iodoadamantane (1-IA) investigated using a multi-technique strategy [synchrotron powder X-ray diffraction (XRD), single-crystal XRD, solid-state NMR, and differential scanning calorimetry (DSC)], which reveals complex phase transition behavior on cooling from ambient temperature to ca. 123 K and on subsequent heating to the melting temperature (348 K). Starting from the known phase of 1-IA at ambient temperature (phase A), three low-temperature phases are identified (phases B, C, and D); the crystal structures of phases B and C are reported, together with a re-determination of the structure of phase A. Remarkably, single-crystal XRD shows that some individual crystals of phase A transform to phase B, while other crystals of phase A transform instead to phase C. Results (from powder XRD and DSC) on cooling a powder sample of phase A are fully consistent with this behavior while also revealing an additional transformation pathway from phase A to phase D. Thus, on cooling, a powder sample of phase A transforms partially to phase C (at 229 K), partially to phase D (at 226 K) and partially to phase B (at 211 K). During the cooling process, each of the phases B, C, and D is formed directly from phase A, and no transformations are observed between phases B, C, and D. On heating the resulting triphasic powder sample of phases B, C, and D from 123 K, phase B transforms to phase D (at 211 K), followed by the transformation of phase D to phase C (at 255 K), and finally, phase C transforms to phase A (at 284 K). From these observations, it is apparent that different crystals of phase A, which are ostensibly identical at the level of information revealed by XRD, must actually differ in other aspects that significantly influence their low-temperature phase transition pathways. This unusual behavior will stimulate future studies to gain deeper insights into the specific properties that control the phase transition pathways in individual crystals of this material
Accurate masses and radii of normal stars: modern results and applications
This paper presents and discusses a critical compilation of accurate,
fundamental determinations of stellar masses and radii. We have identified 95
detached binary systems containing 190 stars (94 eclipsing systems, and alpha
Centauri) that satisfy our criterion that the mass and radius of both stars be
known to 3% or better. To these we add interstellar reddening, effective
temperature, metal abundance, rotational velocity and apsidal motion
determinations when available, and we compute a number of other physical
parameters, notably luminosity and distance. We discuss the use of this
information for testing models of stellar evolution. The amount and quality of
the data also allow us to analyse the tidal evolution of the systems in
considerable depth, testing prescriptions of rotational synchronisation and
orbital circularisation in greater detail than possible before. The new data
also enable us to derive empirical calibrations of M and R for single (post-)
main-sequence stars above 0.6 M(Sun). Simple, polynomial functions of T(eff),
log g and [Fe/H] yield M and R with errors of 6% and 3%, respectively.
Excellent agreement is found with independent determinations for host stars of
transiting extrasolar planets, and good agreement with determinations of M and
R from stellar models as constrained by trigonometric parallaxes and
spectroscopic values of T(eff) and [Fe/H]. Finally, we list a set of 23
interferometric binaries with masses known to better than 3%, but without
fundamental radius determinations (except alpha Aur). We discuss the prospects
for improving these and other stellar parameters in the near future.Comment: 56 pages including figures and tables. To appear in The Astronomy and
Astrophysics Review. Ascii versions of the tables will appear in the online
version of the articl
- …