Index Selection in Terminal Sires Improves Early Lamb Growth

The use of terminal sires (TS) for crossbreeding is integral to the UK sheep industry where approximately 71% of market lambs are sired by TS rams. Early growth of these crossbred lambs affects profitability. The objectives of this study were i) to evaluate the effectiveness of index selection among TS on BW and ADG of their crossbred offspring; and ii) to compare the efficacy of that selection within TS breeds. The most widely used TS breeds in the United Kingdom are Charollais, Suffolk, and Texel. These participated in sire referencing schemes in which they were evaluated on a lean growth index designed to increase carcass lean weight at a given age. From 1999 to 2002, approximately 15 high and 15 low lean growth index rams per breed (93 in total, differing in index on average by 4.6 SD) were selected from within their sire referencing schemes and mated to Welsh and Scottish Mule ewes. Their crossbred offspring were reared commercially on 3 experimental farms in England, Scotland, and Wales. A total of 6,515 lambs were born between 2000 and 2003. Lambs were weighed at birth (BWT), 5 wk (5WT), and 10 wk (10WT), and their ADG from birth to 10 wk was calculated. Lambs sired by high index rams were on average, across breeds, heavier at all ages (P \u3c 0.01) with 0.07 ± 0.03, 0.3 ± 0.1, and 0.4 ± 0.1 kg greater BWT, 5WT, and 10WT, respectively. Their ADG was 5.1 ± 1.9 g/d greater than low-index-sired lambs (P \u3c 0.01). Suffolk-sired lambs were on average heavier at all ages, with greater ADG, whereas Charollais-sired lambs were lightest with smallest ADG. Overall, there was no significant interaction between sire index and sire breed (P \u3e 0.10). Within Suffolk-sired lambs, there was little difference between high and low index sires for the traits studied (P \u3e 0.3). High and low index Charollais-sired lambs differed in BWT (0.09 ± 0.04 kg) and 5WT (0.3 ± 0.1 kg), and Texel-sired lambs differed in 5WT (0.5 ± 0.1 kg), 10WT (0.9 ± 0.2 kg), and ADG (10.2 ± 3.3 g/d; P \u3c 0.01). Lambs from Scottish Mule dams were heavier, with greater ADG, than lambs born to Welsh Mules (P \u3c 0.01). Lambs reared in Scotland were heavier at all ages (P \u3c 0.01). The results suggest that using index selection in TS can improve the growth of their commercial offspring reared on grass

Index selection in terminal sires improves early lamb growth

The use of terminal sires (TS) for crossbreeding is integral to the UK sheep industry where approximately 71% of market lambs are sired by TS rams. Early growth of these crossbred lambs affects profitability. The objectives of this study were i) to evaluate the effectiveness of index selection among TS on BW and ADG of their crossbred offspring; and ii) to compare the efficacy of that selection within TS breeds. The most widely used TS breeds in the United Kingdom are Charollais, Suffolk, and Texel. These participated in sire referencing schemes in which they were evaluated on a lean growth index designed to increase carcass lean weight at a given age. From 1999 to 2002, approximately 15 high and 15 low lean growth index rams per breed (93 in total, differing in index on average by 4.6 SD) were selected from within their sire referencing schemes and mated to Welsh and Scottish Mule ewes. Their crossbred offspring were reared commercially on 3 experimental farms in England, Scotland, and Wales. A total of 6,515 lambs were born between 2000 and 2003. Lambs were weighed at birth (BWT), 5 wk (5WT), and 10 wk (10WT), and their ADG from birth to 10 wk was calculated. Lambs sired by high index rams were on average, across breeds, heavier at all ages (P \u3c 0.01) with 0.07 ± 0.03, 0.3 ± 0.1, and 0.4 ± 0.1 kg greater BWT, 5WT, and 10WT, respectively. Their ADG was 5.1 ± 1.9 g/d greater than low-index-sired lambs (P \u3c 0.01). Suffolk-sired lambs were on average heavier at all ages, with greater ADG, whereas Charollais-sired lambs were lightest with smallest ADG. Overall, there was no significant interaction between sire index and sire breed (P \u3e 0.10). Within Suffolk-sired lambs, there was little difference between high and low index sires for the traits studied (P \u3e 0.3). High and low index Charollais-sired lambs differed in BWT (0.09 ± 0.04 kg) and 5WT (0.3 ± 0.1 kg), and Texel-sired lambs differed in 5WT (0.5 ± 0.1 kg), 10WT (0.9 ± 0.2 kg), and ADG (10.2 ± 3.3 g/d; P \u3c 0.01). Lambs from Scottish Mule dams were heavier, with greater ADG, than lambs born to Welsh Mules (P \u3c 0.01). Lambs reared in Scotland were heavier at all ages (P \u3c 0.01). The results suggest that using index selection in TS can improve the growth of their commercial offspring reared on grass

Index Selection in Terminal Sires Improves Lamb Performance at Finishing

Lamb meat is often perceived by consumers as fatty, and consumption has decreased in recent decades. A lean growth index was developed in the UK for terminal sire breeds to increase carcass lean content and constrain fat content at a constant age end point. The purposes of this study were 1) to evaluate the effects of index selection of terminal sires on their crossbred offspring at finishing and 2) to evaluate its effectiveness within terminal sire breeds. Approximately 70% of lambs marketed in the UK have been sired by rams of breeds typically thought of as specialized terminal sires. The most widely used are Charollais, Suffolk, and Texel. These breeds participated in sire referencing schemes from the early 1990s by sharing rams among flocks selected on the lean growth index. From 1999 to 2002 approximately 15 “high” and 15 “low” lean growth index score rams were selected from within their sire referencing schemes and mated to Welsh and Scottish Mule ewes. Their crossbred offspring were commercially reared on 3 farms in the UK. Lambs were finished to an estimated 11% subcutaneous fat by visual evaluation. At finishing, lambs were weighed, ultrasonically scanned, and assessed for condition score and conformation. Records were obtained for 6,356 lambs on finishing BW (FWT), ultrasonic muscle depth (UMD), ultrasonic fat depth, overall condition score (OCS), and conformation of gigot, loin, and shoulder. Ultrasonic fat depth was log transformed (logUFD) to approach normality. High-index-sired lambs were heavier at finishing (1.2 ± 0.2 kg) with thicker UMD (0.7 ± 0.2 mm) and less logUFD (0.08 ± 0.01 mm; P \u3c 0.05). There were no differences in OCS or conformation based on the sire index or breed (P \u3e 0.08). Suffolk-sired lambs were heavier than Charollais (1.0 ± 0.3 kg), which were heavier than Texel (0.9 ± 0.3 kg; P \u3c 0.001). Texel-sired lambs had thicker UMD than Charollais (0.7 ± 0.2 mm; P \u3c 0.001) but were not different than Suffolk. Charollais-sired lambs had greater logUFD than both Texel (0.098 ± 0.016 mm) and Suffolk (0.061 ± 0.017 mm) sired lambs (P \u3c 0.001). Within a breed, high- and low-index-sired lambs differed in performance with the exceptions of FWT and UMD in Suffolks. Index selection produced heavier and leaner lambs at finishing. Producers have flexibility in choosing the terminal sire that best fits their production system

Synthesis of silica xerogels with high surface area using acetic acid as catalyst

The influence of acetic acid on the pore structure and surface area of silica prepared by the sol-gel method was investigated. Experimental conditions of synthesis, such as gelation temperature and solvents, were also studied. N2 adsorption isotherms of the samples were type 1, typical of microporous materials, explaining the high surface area values (BET) observed. The simultaneous addition of acetic and hydrochloric acids as catalysts and of acetone as solvent, together with the use of a gelation temperature of 20 ºC, made it possible to prepare amorphous silica materials with surface area values up to 850 m² g-1. The high surface area value of these samples could be explained by the microporosity and the nanometric size of the particles.Nesse trabalho foi estudada a influência do ácido acético na estrutura de poros e na área superficial de sílicas preparadas pelo método sol-gel. Condições experimentais de síntese, tais como temperatura de policondensação e solventes, também foram estudadas. Isotermas de adsorção de N2 das amostras foram classificadas como do tipo 1, típicas de materiais microporosos, o que explica os altos valores de área superficial obtidos. A adição simultânea dos ácidos acético e clorídrico como catalisadores e de acetona como solvente, bem como o emprego de uma temperatura de policondensação de 20 ºC, possibilitaram a preparação de sílicas amorfas com valores de área superficial de até 850 m² g-1. O alto valor de área superficial dessas amostras pode ser explicado principalmente pela microporosidade e também pelo tamanho nanométrico das partículas.886890Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

SPIDERS: Selection of spectroscopic targets using AGN candidates detected in all-sky X-ray surveys

SPIDERS (SPectroscopic IDentification of eROSITA Sources) is an SDSS-IV survey running in parallel to the eBOSS cosmology project. SPIDERS will obtain optical spectroscopy for large numbers of X-ray-selected AGN and galaxy cluster members detected in wide area eROSITA, XMM-Newton and ROSAT surveys. We describe the methods used to choose spectroscopic targets for two sub-programmes of SPIDERS: X-ray selected AGN candidates detected in the ROSAT All Sky and the XMM-Newton Slew surveys. We have exploited a Bayesian cross-matching algorithm, guided by priors based on mid-IR colour-magnitude information from the WISE survey, to select the most probable optical counterpart to each X-ray detection. We empirically demonstrate the high fidelity of our counterpart selection method using a reference sample of bright well-localised X-ray sources collated from XMM-Newton, Chandra and Swift-XRT serendipitous catalogues, and also by examining blank-sky locations. We describe the down-selection steps which resulted in the final set of SPIDERS-AGN targets put forward for spectroscopy within the eBOSS/TDSS/SPIDERS survey, and present catalogues of these targets. We also present catalogues of ~12000 ROSAT and ~1500 XMM-Newton Slew survey sources which have existing optical spectroscopy from SDSS-DR12, including the results of our visual inspections. On completion of the SPIDERS program, we expect to have collected homogeneous spectroscopic redshift information over a footprint of ~7500 deg$^2$ for >85 percent of the ROSAT and XMM-Newton Slew survey sources having optical counterparts in the magnitude range 17<r<22.5, producing a large and highly complete sample of bright X-ray-selected AGN suitable for statistical studies of AGN evolution and clustering.Comment: MNRAS, accepte

Livestock production: recent trends, future prospects

The livestock sector globally is highly dynamic. In developing countries, it is evolving in response to rapidly increasing demand for livestock products. In developed countries, demand for livestock products is stagnating, while many production systems are increasing their efficiency and environmental sustainability. Historical changes in the demand for livestock products have been largely driven by human population growth, income growth and urbanization and the production response in different livestock systems has been associated with science and technology as well as increases in animal numbers. In the future, production will increasingly be affected by competition for natural resources, particularly land and water, competition between food and feed and by the need to operate in a carbon-constrained economy. Developments in breeding, nutrition and animal health will continue to contribute to increasing potential production and further efficiency and genetic gains. Livestock production is likely to be increasingly affected by carbon constraints and environmental and animal welfare legislation. Demand for livestock products in the future could be heavily moderated by socio-economic factors such as human health concerns and changing socio-cultural values. There is considerable uncertainty as to how these factors will play out in different regions of the world in the coming decades

A Halomethane thermochemical network from iPEPICO experiments and quantum chemical calculations

Internal energy selected halomethane cations CH3Cl+, CH2Cl2+, CHCl3+, CH3F+, CH2F2+, CHClF2+ and CBrClF2+ were prepared by vacuum ultraviolet photoionization, and their lowest energy dissociation channel studied using imaging photoelectron photoion coincidence spectroscopy (iPEPICO). This channel involves hydrogen atom loss for CH3F+, CH2F2+ and CH3Cl+, chlorine atom loss for CH2Cl2+, CHCl3+ and CHClF2+, and bromine atom loss for CBrClF2+. Accurate 0 K appearance energies, in conjunction with ab initio isodesmic and halogen exchange reaction energies, establish a thermochemical network, which is optimized to update and confirm the enthalpies of formation of the sample molecules and their dissociative photoionization products. The ground electronic states of CHCl3+, CHClF2+ and CBrClF2+ do not confirm to the deep well assumption, and the experimental breakdown curve deviates from the deep well model at low energies. Breakdown curve analysis of such shallow well systems supplies a satisfactorily succinct route to the adiabatic ionization energy of the parent molecule, particularly if the threshold photoelectron spectrum is not resolved and a purely computational route is unfeasible. The ionization energies have been found to be 11.47 ± 0.01 eV, 12.30 ± 0.02 eV and 11.23 ± 0.03 eV for CHCl3, CHClF2 and CBrClF2, respectively. The updated 0 K enthalpies of formation, ∆fHo0K(g) for the ions CH2F+, CHF2+, CHCl2+, CCl3+, CCl2F+ and CClF2+ have been derived to be 844.4 ± 2.1, 601.6 ± 2.7, 890.3 ± 2.2, 849.8 ± 3.2, 701.2 ± 3.3 and 552.2 ± 3.4 kJ mol–1, respectively. The ∆fHo0K(g) values for the neutrals CCl4, CBrClF2, CClF3, CCl2F2 and CCl3F and have been determined to be –94.0 ± 3.2, –446.6 ± 2.7, –702.1 ± 3.5, –487.8 ± 3.4 and –285.2 ± 3.2 kJ mol–1, respectively