122 research outputs found
Theory of magnetism and metal-insulator transition in layered perovskite iridates
We investigate the metal-insulator transition in the layered Ruddelsden
Popper series of strontium iridates Srn+1IrnO3n+1. Tight-binding models of t2g
orbitals for n = 1, 2, and infinity are constructed, and changes in band
dispersion due to dimensionality and spin-orbit coupling are presented.
Identifying the states near the Fermi level to be predominantly Jeff = 1/2, we
use an effective Hubbard model to study the effect of correlations. Transitions
from a metallic state to various magnetically ordered states at different
critical interactions are obtained. A canted antiferromagnetic insulator is
found for Sr2IrO4, a c-axis collinear antiferromagnetic insulator for Sr3Ir2O7,
and non-coplanar canted antiferromagnetic insulator via magnetic metal for
SrIrO3. We derive the strong-coupling spin-model and compare the magnetic
ordering patterns obtained in the weak and strong coupling limits. We find that
they are identical, indicating that magnetic ordering is not sufficient to
justify Mott physics in this series of iridates.Comment: 11 pages, 18 figure
Efficacy and safety of hydroxychloroquine when added to stable insulin therapy in combination with metformin and glimepiride in patients with type 2 diabetes compare to sitagliptin
Background: The trial was done to evaluate the efficacy and tolerability of hydroxychloroquine when added to stable insulin therapy in combination with metformin and glimepiride in patients with type 2 diabetes (T2DM) compare to sitagliptin.Methods: After two weeks run in period, eligible patients inadequately controlled on long acting, intermediate acting or premixed insulin (HbA1c ā„7.5% and ā¤10%), in combination with metformin and glimepiride were randomised 1:1 to the addition of once daily hydroxychloroquine 400mg or sitagliptin 100mg over 24weeks study period. The primary endpoint was HbA1c change from baseline at week 24. Home based glucometer was used to determine finger stick glucose value to detect hypo or hyperglycemia periodically.Results: At 24 weeks, the addition of hydroxychloroquine significantly (p <0.001) reduced HbA1c by 1.3% compared with Sitagliptin which was 0.9%. A greater proportion of patients achieved an HbA1c level <7% while randomised to Hydroxychloroquine as compared with sitagliptin (31 vs. 18% respectively; p <0.001). The addition of hydroxychloroquine significantly (p<0.001) reduced fasting plasma glucose by 31.0mg/dl (vs 23.2mg/dl with sitagliptin) and post prandial plasma glucose by 52.1mg/dl (vs 41mg/dl with sitagliptin) relative to sitagliptin. The difference in mean value of total daily insulin dose showed a highly significant decrease (P <0.0001) from baseline to end of the treatment with hydroxychloroquine i.e. from 41Ā±10.2 to 31.87Ā±16.49 IU as compare to sitagliptin i.e. from 41Ā±10.6 to 37.91Ā±11.71 IU. And also highly significant (P <0.0001) decrease in mean weight was observed at the end of trial with hydroxychloroquine.Conclusions: Hydroxychloroquine decreases HbA1c in patients whose type 2 diabetes is poorly controlled with stable-dose insulin therapy with metformin and glimepiride
A Novel Approach for Integrated Shortest Path Finding Algorithm (ISPSA) Using Mesh Topologies and Networks-on-Chip (NOC)
A novel data dispatching or communication technique based on circulating networks of any network IP is suggested for multi data transmission in multiprocessor systems using Networks-On-Chip (NoC). In wireless communication network management have some negatives have heavy data losses and traffic of data sending data while packet scheduling and low performance in the varied network due to workloads. To overcome the drawbacks, in this method proposed system is Integrated Shortest Path Search Algorithm (ISPSA) using mesh topologies. The message is sent to IP (Internet Protocol) in the network until the specified bus accepts it. Integrated Shortest Path Search Algorithm for communication between two nodes is possible at any one moment. On-chip wireless communications operating at specific frequencies are the most capable option for overcoming metal interconnects multi-hop delay and excessive power consumption in Network-on-Chip (NoC) devices. Each node can be indicated by a pair of coordinates (level, position), where the level is the tree's vertical level and the view point is its horizontal arrangement in the sequence of left to right. The output gateway node's n nodes are linked to two nodes in the following level, with all resource nodes located at the bottommost vertical level and the constraint of this topology is its narrow bisection area. The software Xilinx 14.5 tool by using that overall performance analysis of mesh topology, each method are reduced data losses with better accuracy although the productivity of the delay is decreased by 21 % was evaluated and calculated.
Biofabrication of Anisotropic Gold Nanotriangles Using Extract of Endophytic Aspergillus clavatus as a Dual Functional Reductant and Stabilizer
Biosynthesis of metal and semiconductor nanoparticles using microorganisms has emerged as a more eco-friendly, simpler and reproducible alternative to the chemical synthesis, allowing the generation of rare forms such as nanotriangles and prisms. Here, we report the endophytic fungus Aspergillus clavatus, isolated from surface sterilized stem tissues of Azadirachta indica A. Juss., when incubated with an aqueous solution of chloroaurate ions produces a diverse mixture of intracellular gold nanoparticles (AuNPs), especially nanotriangles (GNT) in the size range from 20 to 35 nm. These structures (GNT) are of special interest since they possess distinct plasmonic features in the visible and IR regions, which equipped them with unique physical and optical properties exploitable in vital applications such as optics, electronics, catalysis and biomedicine. The reaction process was simple and convenient to handle and was monitored using ultravioletāvisible spectroscopy (UVāvis). The morphology and crystalline nature of the GNTs were determined from transmission electron microscopy (TEM), atomic force spectroscopy (AFM) and X-ray diffraction (XRD) spectroscopy. This proposed mechanistic principal might serve as a set of design rule for the synthesis of anisotropic nanostructures with desired architecture and can be amenable for the large scale commercial production and technical applications
Intrahepatic injection of adenovirus reduces inflammation and increases gene transfer and therapeutic effect in mice
Recombinant adenoviruses (Ad) are among the most extensively used vectors for liver gene transfer. One of the major limitations for the clinical application of these vectors is the inflammatory immune response associated with systemic administration of high dose of virus. We evaluated the effect of Ad administration route on the inflammatory immune response and liver transgene expression. We compared direct intrahepatic injection (IH) with the systemic administration via tail vein (IV). IH injection of Ad resulted in a lower inflammatory response and a higher transgene expression. When a relatively low dose of virus was used, IV administration resulted in no detectable protein expression but production of proinflammatory cytokines. In contrast, IH administration induced high levels of transgene expression and no inflammation, although we detected a transient hypertransaminemia, which fully resolved within days. Furthermore, IH injection resulted in a faster protein expression being more intense at the site of injection, whereas IV administration caused slower but diffuse liver expression. IH injection also reduced the spreading of the virus to other organs. Independently of the route, depletion of Kupffer cells significantly enhanced the transduction efficiency of Ad. This effect was stronger when using IV injection, indicating that IH injection partially overcomes Kupffer cell phagocytic activity. Moreover, the antitumor efficacy of high-capacity-Ad encoding murine interleukin-12 (IL-12) was significantly greater when the vector was administered by IH injection than when given IV. In conclusion, IH injection of adenovirus represents a safe and efficient administration route for clinical applications of gene therapy targeting the liver
Stabilizing entanglement autonomously between two superconducting qubits
Quantum error-correction codes would protect an arbitrary state of a
multi-qubit register against decoherence-induced errors, but their
implementation is an outstanding challenge for the development of large-scale
quantum computers. A first step is to stabilize a non-equilibrium state of a
simple quantum system such as a qubit or a cavity mode in the presence of
decoherence. Several groups have recently accomplished this goal using
measurement-based feedback schemes. A next step is to prepare and stabilize a
state of a composite system. Here we demonstrate the stabilization of an
entangled Bell state of a quantum register of two superconducting qubits for an
arbitrary time. Our result is achieved by an autonomous feedback scheme which
combines continuous drives along with a specifically engineered coupling
between the two-qubit register and a dissipative reservoir. Similar autonomous
feedback techniques have recently been used for qubit reset and the
stabilization of a single qubit state, as well as for creating and stabilizing
states of multipartite quantum systems. Unlike conventional, measurement-based
schemes, an autonomous approach counter-intuitively uses engineered dissipation
to fight decoherence, obviating the need for a complicated external feedback
loop to correct errors, simplifying implementation. Instead the feedback loop
is built into the Hamiltonian such that the steady state of the system in the
presence of drives and dissipation is a Bell state, an essential building-block
state for quantum information processing. Such autonomous schemes, broadly
applicable to a variety of physical systems as demonstrated by a concurrent
publication with trapped ion qubits, will be an essential tool for the
implementation of quantum-error correction.Comment: 39 pages, 7 figure
Recommended from our members
BoBBLE: ocean-atmosphere interaction and its impact on the South Asian monsoon
The Bay of Bengal (BoB) plays a fundamental role in controlling the weather systems that make up the South Asian summer monsoon system. In particular,the southern BoB has cooler sea surface temperature (SST) that influence ocean-atmosphere interaction and impact on the monsoon. Compared to the southeast, the southwestern BoB is cooler, more saline, receives much less rain, and is influenced by the Summer Monsoon Current(SMC). To examine the impact of these features on the monsoon, the BoB Boundary Layer Experiment (BoBBLE) was jointly undertaken by India and the UK during JuneāJuly 2016. Physical and bio-geochemical observations were made using a CTD, ļ¬ve ocean gliders, a uCTD, a VMP, two ADCPs, Argo ļ¬oats, drifting buoys, meteorological sensors and upper air radiosonde balloons. The observations were made along a zonal section at 8ā¦N between 85.3ā¦E and 89ā¦E with a 10-day time series at 89ā¦E, 8ā¦N. This paper presents the new observed features of the southern BoB from the BoBBLE ļ¬eld program, supported by satellite data. Key results from the BoBBLE ļ¬eld campaign show the Sri Lanka Dome and the SMC in different stages of their seasonal evolution and two freshening events during which salinity decreased in the upper layer leading to the formation of thick barrier layers. BoBBLE observations were taken during a suppressed phase of the intraseasonal oscillation; they captured in detail the warming of the ocean mixed layer and preconditioning of the atmosphere to convection
- ā¦