Development and Comparative Analysis of Electrochemically Etched Tungsten Tips for Quartz Tuning Fork Sensor

Quartz Tuning Fork (QTF) based sensors are used for Scanning Probe Microscopes (SPM), in particular for near-field scanning optical microscopy. Highly sharp Tungsten (W) tips with larger cone angles and less tip diameter are critical for SPM instead of platinum and iridium (Pt/Ir) tips due to their high-quality factor, conductivity, mechanical stability, durability and production at low cost. Tungsten is chosen for its ease of electrochemical etching, yielding high-aspect ratio, sharp tips with tens of nanometer end diameters, while using simple etching circuits and basic electrolyte chemistry. Moreover, the resolution of the SPM images is observed to be associated with the cone angle of the SPM tip, therefore Atomic-Resolution Imaging is obtained with greater cone angles. Here, the goal is to chemically etch W to the smallest possible tip apex diameters. Tips with greater cone angles are produced by the custom etching procedures, which have proved superior in producing high quality tips. Though various methods are developed for the electrochemical etching of W wire, with a range of applications from scanning tunneling microscopy (SPM) to electron sources of scanning electron microscopes, but the basic chemical etching methods need to be optimized for reproducibility, controlling cone angle and tip sharpness that causes problems for the end users. In this research work, comprehensive experiments are carried out for the production of tips from 0.4 mm tungsten wire by three different electrochemical etching techniques, that is, Alternating Current (AC) etching, Meniscus etching and Direct Current (DC) etching. Consequently, sharp and high cone angle tips are obtained with required properties where the results of the W etching are analyzed, with optical microscope, and then with field emission scanning electron microscopy (FE-SEM). Similarly, effects of varying applied voltages and concentration of NaOH solution with comparison among the produced tips are investigated by measuring their cone angle and tip diameter. Moreover, oxidation and impurities, that is, removal of contamination and etching parameters are also studied in this research work. A method has been tested to minimize the oxidation on the surface and the tips were characterized with scanning electron microscope (SEM)

Rendimento, estoque de carbono e dinâmica de preços das espécies de árvore agroflorestal no distrito de Mardan, Khyber Pakhtunkhwa, Paquistão

Abstract A socio-economic study was conducted in district Mardan of the Khyber Pakhtunkhwa (KP) province of Pakistan to get a comprehensive knowledge of the agroforestry tree species grown on the farmlands, their yield, and carbon stock. For yield and carbon stock estimation, data were collected from 59 sample plots by measuring the diameter, height, volume, and biomass of selected agroforestry tree species through D-tape and Haga altimeter. A total of 59 sample plots were inventoried using 2.5 percent sampling intensity. Each sample plot has an area of 0.5 ha, where each tree with a Diameter at Breast Height (DBH) ≥ 5 cm was inventoried. The calculated amount of volume of each tree species was then converted to biomass by multiplying it by the density of wood and the Biomass Expansion Factor (BEF). Total yield and C stock for the selected agroforestry tree species were 11535.2 metric tons and 2102.2 metric tons, respectively. Populus euroamericana is classified as the main tree with 28% growing stock prior to Morus alba by 21%, while Melia azedarach, Eucalyptus camaldulensis, Dalbergia sissoo, Acacia nilotica, Salix tetrasperma, and Bombax ceiba consist of 15%, 12%, 8%, 6%,7% and 3% growing stock respectively. Among the species found in different sampling plots the yield of Populus euroamericana was found to be 4747.5 metric tons and it was followed by the species Morus alba found at 2027.3 metric tons. Similarly, the volume for Melia azedarach, Eucalyptus camaldulensis, Dalbergia sissoo, Salix spp, Boombox ceiba, and Acacia nilotica was 1532.2 tons,1503 ton,745.7,203.5ton, 555.4ton and 220.5ton, respectively. The carbon stock for Populus euroamericana was calculated as 777.8 ton/ha, while for Eucalyptus camaldulensis, Melia azedarach, Morus alba, Dalbergia sissoo, Acacia nilotica, Salix species, and Bombax ceiba it was calculated as 312.3ton/ha, 272.1ton/ha, 363ton/ha, 245.1ton/ha, 51.4ton/ha, 27.3ton/ha and 53.2ton/ha, respectively. The questionnaire survey conducted for price dynamics showed that the majority of respondents purchase timber from the market for construction. But they use farm trees with low-quality city construction. They dislike using local timber in the conventional building as timber from farm trees is liable to insect attack. Rs. 50,000-100000, (33.33%) of daily sales was concluded from 50% of the trader while (16.7%) of the traders have their sales between Rs.150,000-200,000. Therefore, it is concluded by the authors that both provincial and federal government should promote agroforestry in Pakistan through different incentives because it has the potential to cope with dilemma of deforestation of natural forests and improve the livelihood of local peoples. It is strongly recommended that special projects just like the Ten Billion Tree Afforestation Project (T-BTTP) should be launched for agroforestry plantation and promotion in the country to sustain the ecological harmony and uplift the socio-economic condition of the peoples of Pakistan

Seismic risk assessment for developing countries : Pakistan as a case study

Modern Earthquake Risk Assessment (ERA) methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment (PSHA) that may not be readily available in developing countries. To bypass this drawback, this paper presents a practical event-based PSHA method that uses instrumental seismicity, available historical seismicity, as well as limited information on geology and tectonic setting. Historical seismicity is integrated with instrumental seismicity to determine the long-term hazard. The tectonic setting is included by assigning seismic source zones associated with known major faults. Monte Carlo simulations are used to generate earthquake catalogues with randomized key hazard parameters. A case study region in Pakistan is selected to demonstrate the effectiveness of the method. The results indicate that the proposed method produces seismic hazard maps consistent with previous studies, thus being suitable for generating such maps in regions where limited data are available. The PSHA procedure is developed as an integral part of an ERA framework named EQRAM. The framework is also used to determine seismic risk in terms of annual losses for the study region

International genome-wide meta-analysis identifies new primary biliary cirrhosis risk loci and targetable pathogenic pathways.

Primary biliary cirrhosis (PBC) is a classical autoimmune liver disease for which effective immunomodulatory therapy is lacking. Here we perform meta-analyses of discovery data sets from genome-wide association studies of European subjects (n=2,764 cases and 10,475 controls) followed by validation genotyping in an independent cohort (n=3,716 cases and 4,261 controls). We discover and validate six previously unknown risk loci for PBC (Pcombined<5 × 10(-8)) and used pathway analysis to identify JAK-STAT/IL12/IL27 signalling and cytokine-cytokine pathways, for which relevant therapies exist

Micromeria biflora mediated gold and silver nanoparticles for colourimetric detection of antibiotics and dyes degradation

The study reports on synthesis of aqueous extract mediated gold and silver nanoparticles of M. biflora (MBAuNPs and MBAgNPs) via hydrated chloroauric acid and silver nitrate salts. The nanoparticles (NPs) were produced in 1:15 (MBAuNPs) and 1:6 (MBAgNPs) ratios under sunlight displaying localized surface plasmon resonance (LSPR) peaks at 541 and 431 nm, respectively. The sizes characterized by transmission electron, scanning electron, and atomic force microscopic (SEM, TEM, AFM) techniques were respectively 26.73 nm and 53.81 nm. The subject NPs demonstrated application in the degradation of methylene blue, Congo red, Rhodamine B, methyl orange, ortho-nitrophenol, and para-nitrophenol ranging from 65 to 86 %. For detection of levofloxacin, amoxicillin, and azithromycin antibiotics, the MBAuNPs and MBAgNPs exhibited efficiency in real water and biological (blood plasma and urine) samples. Conclusively, the MBAuNPs and MBAgNPs applications for dyes degradation and antibiotics detection was found as simple and cost-effective analytical method