418 research outputs found

    Measurement, modeling, and adjustment of the 10.4-m-diameter Leighton telescopes

    Get PDF
    The design of the Leighton telescopes and the unique techniques used in their fabrication make these telescopes particularly amenable to precise modeling and measurement of their performance. The surface is essentially a continuous membrane supported at 99 uniformly distributed nodes by a pin joint triangular grid space frame. This structure can be accurately modeled and the surface can be adjusted using low- resolution maps. Holographic measurements of the surface figure of these telescopes at the Caltech Submillimeter Observatory (CSO) and the Owens Valley Radio Observatory (OVRO) have been made over several epochs with a repeatability of 5 - 10 micrometer over the zenith angle range from 15 to 75 degrees. The measurements are consistent with the calculated gravitational distortions. Several different surface setting strategies are evaluated and the 'second order deviation from homology,' Hd, is introduced as a measure of the gravitational degradation that can be expected for an optimally adjusted surface. Hd is defined as half of the RMS difference between the deviations from homology for the telescope pointed at the extremes of its intended sky coverage range. This parameter can be used to compare the expected performance of many different types of telescopes, including off-axis reflectors and slant-axis or polar mounts as well as standard alt-az designs. Subtle asymmetries in a telescope's structure are shown to dramatically affect its performance. The RMS surface error of the Leighton telescope is improved by more than a factor of two when optimized over the positive zenith angle quadrant compared to optimization over the negative quadrant. A global surface optimization algorithm is developed to take advantage of the long term stability and understanding of the Leighton telescopes. It significantly improves the operational performance of the telescope over that obtained using a simple 'rigging angle' adjustment. The surface errors for the CSO are now less than 22 micrometer RMS over most of the zenith angle range and the aperture efficiency at 810 GHz exceeds 33%. This illustrates the usefulness of the global surface optimization procedure

    OPTIMAL HOG SLAUGHTER WEIGHTS UNDER ALTERNATIVE PRICING SYSTEMS

    Get PDF
    Three hog genotypes are simulated to determine how producer profits, economically optimal slaughter weights, and carcass component weights change under three pricing models. Live weight pricing pays more for the fatter barrows whereas a three component (separate payments for fat, lean, and byproducts) and six component (separate payments for major primal cuts, other lean, fat, and byproducts) pricing system pay more for the leaner gilts. Implications for selection of genetic stock and pricing system are presented.Swine production management, Hog pricing systems, Hog marketing, Livestock Production/Industries,

    Measurement, modeling, and adjustment of the 10.4-m-diameter Leighton telescopes

    Get PDF
    The design of the Leighton telescopes and the unique techniques used in their fabrication make these telescopes particularly amenable to precise modeling and measurement of their performance. The surface is essentially a continuous membrane supported at 99 uniformly distributed nodes by a pin joint triangular grid space frame. This structure can be accurately modeled and the surface can be adjusted using low- resolution maps. Holographic measurements of the surface figure of these telescopes at the Caltech Submillimeter Observatory (CSO) and the Owens Valley Radio Observatory (OVRO) have been made over several epochs with a repeatability of 5 - 10 micrometer over the zenith angle range from 15 to 75 degrees. The measurements are consistent with the calculated gravitational distortions. Several different surface setting strategies are evaluated and the 'second order deviation from homology,' Hd, is introduced as a measure of the gravitational degradation that can be expected for an optimally adjusted surface. Hd is defined as half of the RMS difference between the deviations from homology for the telescope pointed at the extremes of its intended sky coverage range. This parameter can be used to compare the expected performance of many different types of telescopes, including off-axis reflectors and slant-axis or polar mounts as well as standard alt-az designs. Subtle asymmetries in a telescope's structure are shown to dramatically affect its performance. The RMS surface error of the Leighton telescope is improved by more than a factor of two when optimized over the positive zenith angle quadrant compared to optimization over the negative quadrant. A global surface optimization algorithm is developed to take advantage of the long term stability and understanding of the Leighton telescopes. It significantly improves the operational performance of the telescope over that obtained using a simple 'rigging angle' adjustment. The surface errors for the CSO are now less than 22 micrometer RMS over most of the zenith angle range and the aperture efficiency at 810 GHz exceeds 33%. This illustrates the usefulness of the global surface optimization procedure

    Application of plasmonic nanomaterials in nanomedicine

    Get PDF
    Plasmonic nanoparticles are being researched as a noninvasive tool for ultrasensitive diagnostic, spectroscopic and, recently, therapeutic technologies. With particular antibody coatings on nanoparticles, they attach to the abnormal cells of interest (cancer or otherwise). Once attached, nanoparticles can be activated/heated with UV/visible/IR, RF or X-ray pulses, damaging the surrounding area of the abnormal cell to the point of death. Here, we describe an integrated approach to improved plasmonic therapy composed of nanomaterial optimization and the development of a theory for selective radiation nanophotothermolysis of abnormal biological cells with gold nanoparticles and selfassembled nanoclusters. The theory takes into account radiation-induced linear and nonlinear synergistic effects in biological cells containing nanostructures, with focus on optical, thermal, bubble formation and nanoparticle explosion phenomena. On the basis of the developed models, we discuss new ideas and new dynamic modes for cancer treatment by radiation activated nanoheaters, which involve nanocluster aggregation in living cells, microbubbles overlapping around laser-heated intracellular nanoparticles/ clusters, and laser thermal explosion mode of single nanoparticles (‘nanobombs’) delivered to the cells. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/2058

    ECONOMIC REPLACEMENT OF A HETEROGENEOUS HERD

    Get PDF
    A model was developed and used to determine the optimal slaughter weights of pigs with heterogeneous growth raised in a 1,000 head barn and marketed in truckload groups. Explicitly recognizing the heterogeneity of pig weights and marketing the herd over time in truckload batches can substantially increase profit.Marketing,

    Integrated On-Farm Decision Making: Economic Implications of Increased Variation in Litter Size

    Get PDF
    Increased litter sizes and associated piglet performance consequences, challenge swine producers. Stochastic modeling captured bioeconomic performance of individual piglets. As average litter size increased from 8.8 to 20.8 piglets, costs and revenues per head marketed from the demonstration herd decreased and total profit increased at a decreasing rate.stochastic modeling, farm business management, swine litter size, Agribusiness, Farm Management, Livestock Production/Industries,

    DEVELOPING PREDICTION EQUATIONS FOR FAT FREE LEAN IN THE PRESENCE OF AN UNKNOWN AMOUNT OF PROPORTIONAL MEASUREMENT ERROR

    Get PDF
    Published prediction equations for fat-free lean mass are widely used by producers for carcass evaluation. These regression equations are commonly derived under the assumption that the predictors are measured without error. In practice, however, it is known that some predictors, such as backfat and loin muscle depth, are measured imperfectly with variance that is proportional to the mean. Failure to account for these measurement errors will cause bias in the estimated equation. In this paper, we describe an empirical Bayes approach, using technical replicates, to accurately estimate the regression relationship in the presence of proportional measurement error. We demonstrate, via simulation studies, that this Bayesian approach dramatically improves the accuracy of the estimated equation in comparison to the fit from Ordinary Least Squares regression

    Teaching methodology : An overview of desuggestive learning and accelerated learning

    Get PDF
    Second language teachers are faced with an array of teaching methods and approaches and often find a mix of methodologies insures a successful language learning experience for their students. One such methodology available is suggestopedia. Dr. Georgi Lozanov, the creator of suggestopedia and the science of suggestology, reported his initial research findings in 1966 as a method to accelerate the learning of foreign languages. Continued research by Lozanov led to the United Nations Educational, Scientific and Cultural Organization (UNESCO) announcing in 1978 that “Suggestopedia had the potential to rid the world of illiteracy and raise the standards of education around the world”. While there appears to be little support of suggestopedia within second language classrooms, the last 30 years and particularly the 1980’s have seen an explosion in interest and development of learning methods loosely based on suggestopedia. Methods such as Accelerated Learning, Super-learning, Speed-learning and the Einstein Factor are examples. Variants of suggestopedia however have often misinterpreted Lozanov’s work and have failed to take into account Lozanov’s ongoing research. During the 1980’s Lozanov was placed under house arrest and prevented from overseeing the directions his methodology was taking. Many presumed Lozanov had died (Lozanov, 1999). This paper presents an overview of the teaching methodology proposed by Lozanov along with subsequent variants. It also considers how such methodology could benefit adult foreign language learners and highlights components that are already being used in the classroom.研究ノートResearch Not

    RELATIONSHIPS AMONG MEASURES OF TESTICULAR DEVELOPMENT AND ENDOCRINE FUNCTION IN BOARS

    Get PDF
    Nine blood samples were taken at 30-min intervals from 36 Landrace x Large White boars at each of eight ages (42, 56, 70, 84, 98, 112, 126 and 140 d). Serum concentrations of luteinizing hormone (LH), follicle-stimulating hormone (FSH), testosterone (T) and estradiol- 17β (E-2) were quantified by radioimmunoassay procedures. The maximum concentration of LH and the age at maximum concentration were predicted for each boar. Variability of LH samples was described for each boar by the pooled within age variance among LH samples and by the number of LH peaks. Measurements of testicular development taken at 140 d of age included: in situ testis width and length, excised testis weights and histological traits of excised testes (seminiferous tubule diameter, percentage of tubules with a lumen and percentage of tubules with active spermatogenesis). Pooled within line correlations were calculated with data from boars selected for either high or low testis weight. Correlations among the testicular traits ranged from .45 to .88. Luteinizing hormone concentration (mean over all ages) was related to measures of testicular development (r = .24 to .49). Concentrations of LH from 42 to 84 d of age were more highly correlated with testicular traits than were the concentrations from 98 to 140 d. Boars with larger, more mature testes tended to have higher maximum concentrations of LH (r = .19 to .42) and younger age at maximum concentration (r = -.12 to -.26). Testicular traits were correlated with the number of LH peaks (r = .31 to .43) but not with LH sample variance (r = -.14 to -.01). Concentration of FSH was not related (r = -.20 to .19) to measures of testicular development. Testicular traits were more highly correlated with E-2 concentration (r = .22 to .41) than with T concentration (r = .12 to .33). Correlations between gonadotropin and steroid concentrations were small and nonsignificant
    corecore