Xylem surfactants introduce a new element to the cohesion-tension theory

Vascular plants transport water under negative pressure without constantly creating gas bubbles that would disable their hydraulic systems. Attempts to replicate this feat in artificial systems almost invariably result in bubble formation, except under highly controlled conditions with pure water and only hydrophilic surfaces present. In theory, conditions in the xylem should favor bubble nucleation even more: there are millions of conduits with at least some hydrophobic surfaces, and xylem sap is saturated or sometimes supersaturated with atmospheric gas and may contain surface-active molecules that can lower surface tension. So how do plants transport water under negative pressure? Here, we show that angiosperm xylem contains abundant hydrophobic surfaces as well as insoluble lipid surfactants, including phospholipids, and proteins, a composition similar to pulmonary surfactants. Lipid surfactants were found in xylem sap and as nanoparticles under transmission electron microscopy in pores of intervessel pit membranes and deposited on vessel wall surfaces. Nanoparticles observed in xylem sap via nanoparticle-tracking analysis included surfactant-coated nanobubbles when examined by freeze-fracture electron microscopy. Based on their fracture behavior, this technique is able to distinguish between dense-core particles, liquid-filled, bilayer-coated vesicles/liposomes, and gas-filled bubbles. Xylem surfactants showed strong surface activity that reduces surface tension to low values when concentrated as they are in pit membrane pores. We hypothesize that xylem surfactants support water transport under negative pressure as explained by the cohesion-tension theory by coating hydrophobic surfaces and nanobubbles, thereby keeping the latter below the critical size at which bubbles would expand to form embolisms

A broadly cross-reactive monoclonal antibody against hepatitis E virus capsid antigen

To generate a hepatitis E virus (HEV) genotype 3 (HEV-3)–specific monoclonal antibody (mAb), the Escherichia coli–expressed carboxy-terminal part of its capsid protein was used to immunise BALB/c mice. The immunisation resulted in the induction of HEV-specific antibodies of high titre. The mAb G117-AA4 of IgG1 isotype was obtained showing a strong reactivity with the homologous E. coli, but also yeast-expressed capsid protein of HEV-3. The mAb strongly cross-reacted with ratHEV capsid protein derivatives produced in both expression systems and weaker with an E. coli–expressed batHEV capsid protein fragment. In addition, the mAb reacted with capsid protein derivatives of genotypes HEV-2 and HEV-4 and common vole hepatitis E virus (cvHEV), produced by the cell-free synthesis in Chinese hamster ovary (CHO) and Spodoptera frugiperda (Sf21) cell lysates. Western blot and line blot reactivity of the mAb with capsid protein derivatives of HEV-1 to HEV-4, cvHEV, ratHEV and batHEV suggested a linear epitope. Use of truncated derivatives of ratHEV capsid protein in ELISA, Western blot, and a Pepscan analysis allowed to map the epitope within a partially surface-exposed region with the amino acid sequence LYTSV. The mAb was also shown to bind to human patient–derived HEV-3 from infected cell culture and to hare HEV-3 and camel HEV-7 capsid proteins from transfected cells by immunofluorescence assay. The novel mAb may serve as a useful tool for further investigations on the pathogenesis of HEV infections and might be used for diagnostic purposes. Key points • The antibody showed cross-reactivity with capsid proteins of different hepeviruses. • The linear epitope of the antibody was mapped in a partially surface-exposed region. • The antibody detected native HEV-3 antigen in infected mammalian cells

The German MultiCare-study: Patterns of multimorbidity in primary health care – protocol of a prospective cohort study

Background Multimorbidity is a highly frequent condition in older people, but well designed longitudinal studies on the impact of multimorbidity on patients and the health care system have been remarkably scarce in numbers until today. Little is known about the long term impact of multimorbidity on the patients' life expectancy, functional status and quality of life as well as health care utilization over time. As a consequence, there is little help for GPs in adjusting care for these patients, even though studies suggest that adhering to present clinical practice guidelines in the care of patients with multimorbidity may have adverse effects. Methods The study is designed as a multicentre prospective, observational cohort study of 3.050 patients aged 65 to 85 at baseline with at least three different diagnoses out of a list of 29 illnesses and syndromes. The patients will be recruited in approx. 120 to 150 GP surgeries in 8 study centres distributed across Germany. Information about the patients' morbidity will be collected mainly in GP interviews and from chart reviews. Functional status, resources/risk factors, health care utilization and additional morbidity data will be assessed in patient interviews, in which a multitude of well established standardized questionnaires and tests will be performed. Discussion The main aim of the cohort study is to monitor the course of the illness process and to analyse for which reasons medical conditions are stable, deteriorating or only temporarily present. First, clusters of combinations of diseases/disorders (multimorbidity patterns) with a comparable impact (e.g. on quality of life and/or functional status) will be identified. Then the development of these clusters over time will be analysed, especially with regard to prognostic variables and the somatic, psychological and social consequences as well as the utilization of health care resources. The results will allow the development of an instrument for prediction of the deterioration of the illness process and point at possibilities of prevention. The practical consequences of the study results for primary care will be analysed in expert focus groups in order to develop strategies for the inclusion of the aspects of multimorbidity in primary care guidelines

Mind the bubbles: achieving stable measurements of maximum hydraulic conductivity through woody plant samples

The maximum specific hydraulic conductivity (kmax) of a plant sample is a measure of the ability of a plants’ vascular system to transport water and dissolved nutrients under optimum conditions. Precise measurements of kmax are needed in comparative studies of hydraulic conductivity, as well as for measuring the formation and repair of xylem embolisms. Unstable measurements of kmax are a common problem when measuring woody plant samples and it is commonly observed that kmax declines from initially high values, especially when positive water pressure is used to flush out embolisms. This study was designed to test five hypotheses that could potentially explain declines in kmax under positive pressure: (i) non-steady-state flow; (ii) swelling of pectin hydrogels in inter-vessel pit membranes; (iii) nucleation and coalescence of bubbles at constrictions in the xylem; (iv) physiological wounding responses; and (v) passive wounding responses, such as clogging of the xylem by debris. Prehydrated woody stems from Laurus nobilis (Lauraceae) and Encelia farinosa (Asteraceae) collected from plants grown in the Fullerton Arboretum in Southern California, were used to test these hypotheses using a xylem embolism meter (XYL'EM). Treatments included simultaneous measurements of stem inflow and outflow, enzyme inhibitors, stem-debarking, low water temperatures, different water degassing techniques, and varied concentrations of calcium, potassium, magnesium, and copper salts in aqueous measurement solutions. Stable measurements of kmax were observed at concentrations of calcium, potassium, and magnesium salts high enough to suppress bubble coalescence, as well as with deionized water that was degassed using a membrane contactor under strong vacuum. Bubble formation and coalescence under positive pressure in the xylem therefore appear to be the main cause for declining kmax values. Our findings suggest that degassing of water is essential for achieving stable and precise measurements of kmax through woody plant samples. For complete rehydration of woody samples, incubation in water under vacuum for 24 h is suggested as a reliable technique that avoids bubble problems associated with flushing under high positive pressure

Nanobubbles: a new paradigm for air-seeding in xylem

Long-distance water transport in plants relies on a system that typically operates under negative pressure and is prone to hydraulic failure due to gas bubble formation. One primary mechanism of bubble formation takes place at nanoporous pit membranes between neighboring conduits. We argue that this process is likely to snap off nanobubbles because the local increase in liquid pressure caused by entry of air-water menisci into the complex pit membrane pores would energetically favor nanobubble formation over instant cavitation. Nanobubbles would be stabilized by surfactants and by gas supersaturation of the sap, may dissolve, fragment into smaller bubbles, or create embolisms. The hypothesis that safe and stable nanobubbles occur in plants adds a new component supporting the cohesion-tension theory

Lipid-Coated Nanobubbles in Plants

One of the more surprising occurrences of bulk nanobubbles is in the sap inside the vascular transport system of flowering plants, the xylem. In plants, nanobubbles are subjected to negative pressure in the water and to large pressure fluctuations, sometimes encompassing pressure changes of several MPa over the course of a single day, as well as wide temperature fluctuations. Here, we review the evidence for nanobubbles in plants and for polar lipids that coat them, allowing nanobubbles to persist in this dynamic environment. The review addresses how the dynamic surface tension of polar lipid monolayers allows nanobubbles to avoid dissolution or unstable expansion under negative liquid pressure. In addition, we discuss theoretical considerations about the formation of lipid-coated nanobubbles in plants from gas-filled spaces in the xylem and the role of mesoporous fibrous pit membranes between xylem conduits in creating the bubbles, driven by the pressure gradient between the gas and liquid phase. We discuss the role of surface charges in preventing nanobubble coalescence, and conclude by addressing a number of open questions about nanobubbles in plants

Appendix A. List of studies compiled in the global database of vertical root profiles.

List of studies compiled in the global database of vertical root profiles

Appendix B. Methods used for interpolation and extrapolation of root profiles.

Methods used for interpolation and extrapolation of root profiles

Spatial ecology of a small desert shrub on adjacent geological substrates

1. Spatial pattern analyses were used to generate hypotheses about the processes that shape the structure of a plant community in the Mojave Desert of North America, with a focus on the semi-shrub Ambrosia dumosa. We analysed spatial distributions and sizes of this species relative to other semi-shrubs, shrubs and annuals, and the relationships between spatial patterns and abiotic and biotic habitat characteristics. 2. The analyses were based on maps of sample plots placed along a transect spanning two adjacent geological substrates: aeolian sand and gravelly, sandy to loamy alluvium. Of these two substrates, sand supported higher total biomasses of Ambrosia and of all woody perennials, while alluvium supported on average higher biomasses of winter annuals. 3. Annuals and seedlings of Ambrosia were much more strongly aggregated with Ambrosia canopies on sand than on alluvium, suggesting that these small plants were more strongly facilitated by Ambrosia on sand than on alluvium. 4. Ambrosia semi-shrubs were spatially segregated on sand but aggregated on alluvium, and the degree of segregation on sand increased with the total above-ground biomass of Ambrosia per unit area, indicating that negative interactions between Ambrosia plants were stronger in more productive habitats. Canopy sizes of Ambrosia in all mapped plots increased with distance to the nearest conspecific neighbour, which suggests that neighbour interactions negatively affected plant sizes. 5. Ambrosia plants on sand were spatially aggregated with Acamptopappus sphaerocephalus semi-shrubs, suggesting that at least one of these species may benefit from the association. Ambrosia plants were spatially segregated from Larrea tridentata shrubs on both substrates, possibly due to negative effects of Larrea roots on Ambrosia roots reported in previous studies. 6. Subtle differences in substrate characteristics were correlated with strong differences in the spatial distribution of Ambrosia plants relative to their neighbours, which suggests that edaphic conditions may affect the spatial structure of the community by modifying complex positive and negative interactions between neighbouring plants