Development of pigments for thermal control coatings Final report, 17 Jun. - 16 Dec. 1965

Powdered metal oxide pigments by nucleation for temperature control coating

Monte-Carlo simulation with FLUKA for liquid and solid targets

Introduction Monte-Carlo simulations can be used to assess isotope production on small medical cyclotrons. These simulations calculate the particle interactions with electric and magnetic fields, as well as the nuclear reactions. The results can be used to predict both yields and isotopic contaminations and can aid in the optimum design of target material and target geometry [1,2]. FLUKA is a general-purpose tool widely used in many applications from accelerator shielding to target design, calorimetry, activation, dosimetry, detector design, neutrino physics, or radiotherapy [3,4]. In this work, we applied the Monte-Carlo code FLUKA to determine the accuracy of predicting yields of various isotopes as compared to experimental yields. Material and Methods The proton beam collimation system, as well as the liquid and solid target of the TR13 cyclotron at TRIUMF, has been modeled in FLUKA. The proton beam parameters were initially taken from the cyclotron design specifications and were optimized against experimental measurements from the TR13. Data from irradiations of different targets and with different beam currents were collected in order to account for average behavior, see FIG. 1. Yields for a pencil proton beam as well as a beam spread out in direction and energy have been calculated and have been compared to experimental results obtained with the TR13. Results and Conclusion The reactions listed in TABLE 1 were assessed. For most reactions a good agreement was found in the comparison between experimental and simulated saturation yield. TABLE 1 only shows the yields simulated with a proton beam with a spread in both direction and energy. In most cases, the simulated yield is slightly larger or comparable. Only the calculated yield for 55Co was significantly lower by a factor of 4.2. This is still a good agreement considering that FLUKA was originally a high-energy physics code. It may indicate that the FLUKA internal cross-section calculation for this isotope production needs some optimization. In summary, we conclude that FLUKA can be used as a tool for the prediction of isotope production as well as for target design

Ontological dependence in a spacetime-world

Priority Monism (hereafter, ‘Monism’), as defined by Jonathan Schaffer (Philos Rev 119:131–176, 2010), has a number of components. It is the view that: the cosmos exists; the cosmos is a maximal actual concrete object, of which all actual concrete objects are parts; the cosmos is basic—there is no object upon which the cosmos depends, ontologically; ontological dependence is a primitive and unanalysable relation. In a recent attack, Lowe (Spinoza on monism. Palgave Macmillan, London, pp 92–122, 2012) has offered a series of arguments to show that Monism fails. He offers up four tranches of argument, with different focuses. These focal points are: (1) being a concrete object; (2) aggregation and dependence; (3) analyses of ontological dependence; (4) Schaffer’s no-overlap principle. These are all technical notions, but each figures at the heart of a cluster of arguments that Lowe puts forward. To respond, I work through each tranche of argument in turn. Before that, in the first section, I offer a cursory statement of Monism, as Schaffer presents it in his 2010 paper, Monism: The Priority of the Whole. I then respond to each of Lowe’s criticisms in turn, deploying material from Schaffer’s 2009 paper Spacetime: the One Substance, as well as various pieces of conceptual machinery from Lowe’s own works (The possibility of metaphysics. Clarendon, Oxford, 1998, 2010) to deflect Lowe’s (Spinoza on monism. Palgave Macmillan, London, pp 92–122, 2012) attacks. In the process of defending Monism from Lowe (Spinoza on monism. Palgave Macmillan, London, pp 92–122, 2012), I end up offering some subtle refinements to Schaffer’s (Philos Rev 119:131–176, 2010) view and explain how the resulting ‘hybrid’ view fares in the wider dialectic

QCD Corrections to Production of Higgs Pseudoscalars

Models of electroweak symmetry breaking with more than a single doublet of Higgs scalars contain a neutral pseudoscalar boson. The production of such a pseudoscalar in hadron collisions proceeds primarily via gluon fusion through a top-quark loop (except for those models in which the pseudoscalar coupling to bottom quarks is strongly enhanced). We compute the QCD corrections to this process in the heavy-quark limit, using an effective Lagrangian derived from the axial anomaly.Comment: 9 pages, (BNL number added, 1 typo corrected, PHYZZX format, 4 figures not included, available on request), BNL-4906

Mass modification of D-meson in hot hadronic matter

We evaluate the in-medium $D$ and $\bar D$-meson masses in hot hadronic matter induced by interactions with the light hadron sector described in a chiral SU(3) model. The effective Lagrangian approach is generalized to SU(4) to include charmed mesons. We find that the D-mass drops substantially at finite temperatures and densities, which open the channels of the decay of the charmonium states ($\Psi^\prime$, $\chi_c$, $J/\Psi$) to $D \bar D$ pairs in the thermal medium. The effects of vacuum polarisations from the baryon sector on the medium modification of the $D$-meson mass relative to those obtained in the mean field approximation are investigated. The results of the present work are compared to calculations based on the QCD sum-rule approach, the quark-meson coupling model, chiral perturbation theory, as well as to studies of quarkonium dissociation using heavy quark potential from lattice QCD.Comment: 18 pages including 7 figures, minor revision of the text, figure styles modified, to appear in Phys. Rev.

Classifying oceanographic structures in the Amundsen Sea, Antarctica

Funding: The TARSAN project was funded by the U.S. National Science Foundation, Office of Polar Programs (Grant #1738992) and the UK Natural Environment Research Council (NERC, NE/S006591/1). I.R. was supported by the National Science Foundation’s Southern Ocean Carbon and Climate Observations and Modeling SOCCOM) project under NSF Award PLR-1425989, with additional support from NOAA and NASA.The remote and often ice‐covered Amundsen Sea Embayment in Antarctica is important for transporting relatively warm modified Circumpolar Deep Water (mCDW) to the Western Antarctic Ice Sheet, potentially accelerating its thinning and contribution to sea level rise. To investigate potential pathways and variability of mCDW, 3809 CTD profiles (instrumented seal and ship‐based data) are classified using a machine learning approach (Profile Classification Model). Five vertical regimes are identified, and areas of larger variability highlighted. Three spatial regimes are captured: Off‐Shelf, Eastern and Central Troughs. The on‐shelf profiles further show a separation between cold and warm modes. The variability is higher north of Burke Island and at the southern end of the Eastern Trough, which reflects the convergence of different mCDW pathways between the Eastern and the Central Trough. Finally, a clear but variable clockwise circulation is identified in Pine Island Bay.Publisher PDFPeer reviewe

Granulocyte-targeted therapies for airway diseases

The average respiration rate for an adult is 12–20 breaths per minute, which constantly exposes the lungs to allergens and harmful particles. As a result, respiratory diseases, which includes asthma, chronic obstructive pulmonary disease (COPD) and acute lower respiratory tract infections (LTRI), are a major cause of death worldwide. Although asthma, COPD and LTRI are distinctly different diseases with separate mechanisms of disease progression, they do share a common feature – airway inflammation with intense recruitment and activation of granulocytes and mast cells. Neutrophils, eosinophils, basophils, and mast cells are crucial players in host defense against pathogens and maintenance of lung homeostasis. Upon contact with harmful particles, part of the pulmonary defense mechanism is to recruit these cells into the airways. Despite their protective nature, overactivation or accumulation of granulocytes and mast cells in the lungs results in unwanted chronic airway inflammation and damage. As such, understanding the bright and the dark side of these leukocytes in lung physiology paves the way for the development of therapies targeting this important mechanism of disease. Here we discuss the role of granulocytes in respiratory diseases and summarize therapeutic strategies focused on granulocyte recruitment and activation in the lungs

A controlled migration genetic algorithm operator for hardware-in-the-loop experimentation

In this paper, we describe the development of an extended migration operator, which combats the negative effects of noise on the effective search capabilities of genetic algorithms. The research is motivated by the need to minimize the num- ber of evaluations during hardware-in-the-loop experimentation, which can carry a significant cost penalty in terms of time or financial expense. The authors build on previous research, where convergence for search methods such as Simulated Annealing and Variable Neighbourhood search was accelerated by the implementation of an adaptive decision support operator. This methodology was found to be effective in searching noisy data surfaces. Providing that noise is not too significant, Genetic Al- gorithms can prove even more effective guiding experimentation. It will be shown that with the introduction of a Controlled Migration operator into the GA heuristic, data, which repre- sents a significant signal-to-noise ratio, can be searched with significant beneficial effects on the efficiency of hardware-in-the- loop experimentation, without a priori parameter tuning. The method is tested on an engine-in-the-loop experimental example, and shown to bring significant performance benefits

Shared decision making in patients with low risk chest pain: prospective randomized pragmatic trial.

OBJECTIVE: To compare the effectiveness of shared decision making with usual care in choice of admission for observation and further cardiac testing or for referral for outpatient evaluation in patients with possible acute coronary syndrome. DESIGN: Multicenter pragmatic parallel randomized controlled trial. SETTING: Six emergency departments in the United States. PARTICIPANTS: 898 adults (aged \u3e17 years) with a primary complaint of chest pain who were being considered for admission to an observation unit for cardiac testing (451 were allocated to the decision aid and 447 to usual care), and 361 emergency clinicians (emergency physicians, nurse practitioners, and physician assistants) caring for patients with chest pain. INTERVENTIONS: Patients were randomly assigned (1:1) by an electronic, web based system to shared decision making facilitated by a decision aid or to usual care. The primary outcome, selected by patient and caregiver advisers, was patient knowledge of their risk for acute coronary syndrome and options for care; secondary outcomes were involvement in the decision to be admitted, proportion of patients admitted for cardiac testing, and the 30 day rate of major adverse cardiac events. RESULTS: Compared with the usual care arm, patients in the decision aid arm had greater knowledge of their risk for acute coronary syndrome and options for care (questions correct: decision aid, 4.2 v usual care, 3.6; mean difference 0.66, 95% confidence interval 0.46 to 0.86), were more involved in the decision (observing patient involvement scores: decision aid, 18.3 v usual care, 7.9; 10.3, 9.1 to 11.5), and less frequently decided with their clinician to be admitted for cardiac testing (decision aid, 37% v usual care, 52%; absolute difference 15%; P CONCLUSIONS: Use of a decision aid in patients at low risk for acute coronary syndrome increased patient knowledge about their risk, increased engagement, and safely decreased the rate of admission to an observation unit for cardiac testing.Trial registration ClinicalTrials.gov NCT01969240

Distortion in a 7xxx aluminum alloy during liquid phase sintering

The distortion in a sintered 7xxx aluminum alloy, Al-7Zn-2.5Mg-1Cu (wt. pct), has been investigated by sintering three rectangular bars in each batch at 893 K (620 °C) for 0 to 40 minutes in nitrogen, followed by air or furnace cooling. They were placed parallel to each other, equally spaced apart at 2 mm, with their long axes being perpendicular to the incoming nitrogen flow. Pore evolution in each sample during isothermal sintering was examined metallographically. The compositional changes across sample mid-cross section and surface layers were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy depth profiling, respectively. The two outer samples bent toward the middle one, while the middle sample was essentially distortion free after sintering. The distortion in the outer samples was a result of differential shrinkage between their outer and inner surfaces during isothermal sintering. The porous outer surface showed an enrichment of oxygen around the large pores as well as lower magnesium and zinc contents than the interior and inner surface of the same sample, while the inner surface was distinguished by the presence of AlN. The differential shrinkage was caused by different oxygen contents in local sintering atmosphere and unbalanced loss of magnesium and zinc between the outer and inner surfaces