79 research outputs found
CeO2 Nanoparticles-Loaded pH-Responsive Microparticles with Antitumoral Properties as Therapeutic Modulators for Osteosarcoma
Osteosarcoma is an aggressive form of bone cancer mostly affecting young people. To date, the most effective strategy for the treatment of osteosarcoma is the surgical removal of the tumor with or without combinational chemotherapy. In this study, we present the development of a pH-sensitive drug-delivery system in the form of microparticles, with increased chemotherapeutic action against the osteosarcoma cell line SAOS-2, and with reduced toxicity against the heart myoblastic cell line H9C2. The delivery system is composed of calcium carbonate and collagen type I, and is loaded with cerium dioxide (CeO2) nanoparticles (<25 nm) and the anticancer drug doxorubicin. The fabricated microparticles were fully characterized morphologically and physicochemically, and their ability to induce or inhibit apoptosis/necrosis was assessed using in vitro functional assays and flow cytometry. The results presented in this study show that the highest concentration (250 μg/mL) of the therapeutic microparticles (CaCO3-based therapeutic modulators (C-TherMods)), which corresponds to 6.4 μg/mL of encapsulated doxorubicin, can protect the H9C2 cells even after 120 h, since the percentage of viable cells at this time point is 65%. On the contrary, when H9C2 cells are treated with 0.5 μg/mL of free doxorubicin, 75% of the cells are dead only after 24 h. When SAOS-2 cells are treated with the same concentration of C-TherMods (250 μg/mL), the viability of SAOS-2 cells is 80% after 24 h, while it reduces to 50% after 120 h. At pH 6.0, the synergic effect of the pro-oxidant CeO2nanoparticles and of the encapsulated doxorubicin leads to almost 100% of cell death, even at the lowest concentration of C-TherMods (50 μg/mL)
Photocatalytic Inactivation of Plant Pathogenic Bacteria Using TiO2 Nanoparticles Prepared Hydrothermally
Exploitation of engineered nanomaterials with unique properties has been dynamically growing in numerous fields, including the agricultural sector. Due to the increasing resistance of phytopathogenic microbes, human control over various plant pathogens in crop production is a big challenge and requires the development of novel antimicrobial materials. Photocatalytic active nanomaterials could offer an alternative solution to suppress the plant pathogens. In this work, titanium dioxide nanoparticles (TiO2 NPs) with high photocatalytic activity were synthesized by hydrothermal post-treatment of amorphous titania at different temperatures (250 °C or 310 °C) without using any additives or doping agents. The obtained samples were investigated through X-ray diffraction, N2-sorption measurements, diffuse reflectance UV-Vis spectroscopy, transmission electron microscopy, electron paramagnetic resonance spectroscopy, and X-ray photoelectron spectroscopy. The applied hydrothermal treatment led to the formation of TiO2 nanocrystallites with a predominant anatase crystal phase, with increasing crystallinity and crystallite size by prolonging treatment time. The photocatalytic activity of the TiO2 NPs was tested for the photo-degradation of phenol and applied for the inactivation of various plant pathogens such as Erwinia amylovora, Xanthomonas arboricola pv. juglandis, Pseudomonas syringae pv. tomato and Allorhizobium vitis. The studied bacteria showed different susceptibilities; their living cell numbers were quickly and remarkably reduced by UV-A-irradiated TiO2 NPs. The effectiveness of the most active sample prepared at 310 °C was much higher than that of commercial P25 TiO2. We found that fine-tuning of the structural properties by modulating the time and temperature of the hydrothermal treatment influenced the photocatalytic properties of the TiO2 NPs considerably. This work provides valuable information to the development of TiO2-based antimicrobial photocatalysts
fully solution processed conductive films based on colloidal copper selenide nanosheets for flexible electronics
A novel colloidal synthesis of copper selenide nanosheets (NSs) with lateral dimensions of up to 3 μm is developed. This material is used for the fabrication of flexible conductive films prepared via simple drop-casting of the NS dispersions without any additional treatment. The electrical performance of these coatings is benchmarked against copper selenide spherical nanocrystals (SNCs) in order to demonstrate the advantage of 2D morphology of the NSs for flexible electronics. In this contest, Cu2−xSe SNC films exhibit higher conductivity but lower reproducibility due to the formation of cracks leading to discontinuous films. Furthermore, the electrical properties of the films deposited on different flexible substrates following their bending, stretching and folding are studied. A comparison of Cu2−xSe SNC and CuSe NS films reveals an increased stability of the CuSe NS films under mechanical stress applied to the samples and their improved long-term stability in air
Nutlin-loaded magnetic solid lipid nanoparticles for targeted glioblastoma treatment
Aim: Glioblastoma multiforme is one of the deadliest forms of cancer, and current treatments are limited to palliative cares. The present study proposes a nanotechnology-based solution able to improve both drug efficacy and its delivery efficiency. Materials & methods: Nutlin-3a and superparamagnetic nanoparticles were encapsulated in solid lipid nanoparticles, and the obtained nanovectors (nutlin-loaded magnetic solid lipid nanoparticle [Nut-Mag-SLNs]) were characterized by analyzing both their physicochemical properties and their effects on U-87 MG glioblastoma cells. Results: Nut-Mag-SLNs showed good colloidal stability, the ability to cross an in vitro blood–brain barrier model, and a superior pro-apoptotic activity toward glioblastoma cells with respect to the free drug. Conclusion: Nut-Mag-SLNs represent a promising multifunctional nanoplatform for the treatment of glioblastoma multiforme
Low-cost and effective fabrication of biocompatible nanofibers from silk and cellulose-rich materials
Here, we show the production of nanofibrous mats with controlled mechanical properties and excellent biocompatibility by combining fibroin with pure cellulose and cellulose-rich parsley powder agro-waste. To this end, trifluoroacetic acid was used as a common solvent for all of the involved biomaterials, achieving highly homogeneous blends that were suitable for the electrospinning technique. Morphological analysis revealed that the electrospun composite nanofibers were well-defined and defect-free, with a diameter in the range of 65–100 nm. Mechanical investigations demonstrated that the fibrous mats exhibited an increased stiffness when pure fibroin was combined with cellulose, whereas they possessed an increased flexibility when the parsley waste was added to fibroin. Lastly, the produced mats were highly biocompatible, as demonstrated by the promoted proliferation of fibroblast cells. The characteristics of the hybrid fibroin–cellulose nanofibers, in terms of nanoscale topography, mechanical propertie..
Core/Shell CdSe/CdS bone‐shaped nanocrystals with a thick and anisotropic shell as optical emitters
Colloidal core/shell nanocrystals are key materials for optoelectronics, enabling control over essential properties via precise engineering of the shape, thickness, and crystal structure of their shell. Here, the growth protocol for CdS branched nanocrystals is applied on CdSe nanoplatelet seeds and bone-shaped heterostructures are obtained with a highly anisotropic shell. Surprisingly, the nanoplatelets withstand the high growth temperature of 350 degrees C and structures with a CdSe nanoplatelet core that is overcoated by a shell of cubic CdS are obtained, on top of which tetrahedral CdS structures with hexagonal lattice are formed. These complex core/shell nanocrystals show a band-edge emission around 657 nm with a photoluminescence quantum yield of approximate to 42% in solution, which is also retained in thin films. Interestingly, the nanocrystals manifest simultaneous red and green emission and the relatively long wavelength of the green emission indicates charge recombination at the cubic/hexagonal interface of the CdS shell. The nanocrystal films show amplified spontaneous emission, random lasing, and distributed feedback lasing when the material is deposited on suitable gratings. This work stimulates the design and fabrication of more exotic core/shell heterostructures where charge carrier delocalization, dipole moment, and other optical and electrical properties can be engineered
The Role of Uric Acid in Acute and Chronic Coronary Syndromes.
Uric acid (UA) is the final product of the catabolism of endogenous and exogenous purine nucleotides. While its association with articular gout and kidney disease has been known for a long time, new data have demonstrated that UA is also related to cardiovascular (CV) diseases. UA has been identified as a significant determinant of many different outcomes, such as all-cause and CV mortality, and also of CV events (mainly Acute Coronary Syndromes (ACS) and even strokes). Furthermore, UA has been related to the development of Heart Failure, and to a higher mortality in decompensated patients, as well as to the onset of atrial fibrillation. After a brief introduction on the general role of UA in CV disorders, this review will be focused on UA's relationship with CV outcomes, as well as on the specific features of patients with ACS and Chronic Coronary Syndrome. Finally, two issues which remain open will be discussed: the first is about the identification of a CV UA cut-off value, while the second concerns the possibility that the pharmacological reduction of UA is able to lower the incidence of CV events
Zinc Polyaleuritate Ionomer Coatings as a Sustainable, Alternative Technology for Bisphenol A-Free Metal Packaging
Sustainable coatings for metal food packaging were prepared from ZnO nanoparticles (obtained by the thermal decomposition of zinc acetate) and a naturally occurring polyhydroxylated fatty acid named aleuritic (or 9,10,16-trihydroxyhexadecanoic) acid. Both components reacted, originating under specific conditions zinc polyaleuritate ionomers. The polymerization of aleuritic acid into polyaleuritate by a solvent-free, melt polycondensation reaction was investigated at different times (15, 30, 45, and 60 min), temperatures (140, 160, 180, and 200 °C), and proportions of zinc oxide and aleuritic acid (0:100, 5:95, 10:90, and 50:50, w/w). Kinetic rate constants calculated by infrared spectroscopy decreased with the amount of Zn due to the consumption of reactive carboxyl groups, while the activation energy of the polymerization decreased as a consequence of the catalyst effect of the metal. The adhesion and hardness of coatings were determined from scratch tests, obtaining values similar to robust polymers with high adherence. Water contact angles were typical of hydrophobic materials with values ≥94°. Both mechanical properties and wettability were better than those of bisphenol A (BPA)-based resins and most likely are related to the low migration values determined using a hydrophilic food simulant. The presence of zinc provided a certain degree of antibacterial properties. The performance of the coatings against corrosion was studied by electrochemical impedance spectroscopy at different immersion times in an aqueous solution of NaCl. Considering the features of these biobased lacquers, they can be potential materials for bisphenol A-free metal packagingPeer reviewe
Comparative Study of Loading of Anodic Porous Alumina with Silver Nanoparticles Using Different Methods
material
Comparative Study of Loading of Anodic Porous Alumina with Silver Nanoparticles Using Different Methods
- …