Origin of electrochemical activity in nano-Li2MnO3; Stabilization via a 'point defect scaffold'

Molecular dynamics (MD) simulations of the charging of Li2MnO3 reveal that the reason nanocrystalline-Li2MnO3 is electrochemically active, in contrast to the parent bulk-Li2MnO3, is because in the nanomaterial the tunnels, in which the Li ions reside, are held apart by Mn ions, which act as a pseudo 'point defect scaffold'. The Li ions are then able to diffuse, via a vacancy driven mechanism, throughout the nanomaterial in all spatial dimensions while the 'Mn defect scaffold' maintains the structural integrity of the layered structure during charging. Our findings reveal that oxides, which comprise cation disorder, can be potential candidates for electrodes in rechargeable Li-ion batteries. Moreover, we propose that the concept of a 'point defect scaffold' might manifest as a more general phenomenon, which can be exploited to engineer, for example, two or three-dimensional strain within a host material and can be fine-tuned to optimize properties, such as ionic conductivity

Environment-mediated structure, surface redox activity and reactivity of ceria nanoparticles

Nanomaterials, with potential application as bio-medicinal agents, exploit the chemical properties of a solid, with the ability to be transported (like a molecule) to a variety of bodily compartments. However, the chemical environment can change significantly the structure and hence properties of a nanomaterial. Accordingly, its surface reactivity is critically dependent upon the nature of the (biological) environment in which it resides. Here, we use Molecular Dynamics (MD) simulation, Density Functional Theory (DFT) and aberration corrected TEM to predict and rationalise differences in structure and hence surface reactivity of ceria nanoparticles in different environments. In particular we calculate reactivity 'fingerprints' for unreduced and reduced ceria nanoparticles immersed in water and in vacuum. Our simulations predict higher activities of ceria nanoparticles, towards oxygen release, when immersed in water because the water quenches the coordinative unsaturation of surface ions. Conversely, in vacuum, surface ions relax into the body of the nanoparticle to relieve coordinative unsaturation, which increases the energy barriers associated with oxygen release. Our simulations also reveal that reduced ceria nanoparticles are more active towards surface oxygen release compared to unreduced nanoceria. In parallel, experiment is used to explore the activities of ceria nanoparticles that have suffered a change in environment. In particular, we compare the ability of ceria nanoparticles, in an aqueous environment, to scavenge superoxide radicals compared to the same batch of nanoparticles, which have first been dried and then rehydrated. The latter show a distinct reduction in activity, which we correlate to a change in the redox chemistry associated with moving between different environments. The reactivity of ceria nanoparticles is therefore not only environment dependent, but is also influenced by the transport pathway or history required to reach the particular environment in which its reactivity is to be exploited. © 2013 The Royal Society of Chemistry

Research in progress: Assessing marine radiocarbon reservoir effect variation in greater Utqiaġvik, Alaska

No abstract available

Amorphisation and recrystallisation study of lithium intercalation into TiO 2 nano-architecture.

Titanium dioxide is playing an increasingly significant role in easing environmental and energy concerns. Its rich variety of polymorphic crystal structures has facilitated a wide range of applications such as photo-catalysis, photo-splitting of water, photoelectrochromic devices, insulators in metal oxide, semiconductors devices, dye sensitized solar cells (DSSCs) (energy conversions), rechargeable lithium batteries (electrochemical storage). The complex structural aspects in nano TiO 2 , are elucidated by microscopic visualization and quantification of the microstructure for electrode materials, since cell performance and various aging mechanisms depend strongly on the appearance and changes in the microstructure. Recent studies on MnO 2 have demonstrated that amorphisation and recrystallisation simulation method can adequately generate various nanostructures, for Li-ion battery compounds. The method was also previously employed to produce nano-TiO 2 . In the current study, the approach is used to study lithiated nanoporous structure for TiO 2 which have been extensively studied experimentally, as mentioned above. Molecular graphic images showing microstructural features, including voids and channels have accommodated lithium’s during lithiation and delithiation. Preliminary lithiation of TiO 2 will be considered

Gambling with Your Health: Associations Between Gambling Problem Severity and Health Risk Behaviours, Health and Wellbeing

The current study examined the association between gambling problem severity and health risk behaviours, health and wellbeing. A cross-sectional survey (including representative population and supplementary convenience samples) was conducted with 2303 adult residents of a British Island. Gambling problem severity was assessed using the Problem Gambling Severity Index. The EQ-5D-5L, WEMWBS and AUDIT-C were used to measure general health, mental wellbeing and alcohol use, respectively. Other measures included diet, physical exercise and tobacco use. Differences between gambling severity levels for each measure were analysed using logistic regression adjusting for age, sex and income. Compared to non-problem gamblers, moderate/high severity gamblers had higher odds of a poor diet, low physical exercise and poor general health. Tobacco use was associated with both low and moderate/high severity gambling. Low severity, but not moderate/high severity gambling, was significantly associated with binge and higher risk drinking behaviours. Health risk behaviours tended to cluster, with a graded relationship between gambling problem severity and odds of reporting at least two health risk behaviours. Compared to non-problem gamblers, low severity gamblers were approximately twice as likely and moderate/high severity gamblers were three times as likely, to have low mental wellbeing. Findings suggest associations between gambling problems and a range of health risk behaviours and health issues, and crucially that such issues are not limited to gamblers with the highest severity of problems. Addressing gambling across the whole continuum of risk should be a key public health priority

Is Geometric Frustration-Induced Disorder a Recipe for High Ionic Conductivity?

Ionic conductivity is ubiquitous to many industrially important applications such as fuel cells, batteries, sensors, and catalysis. Tunable conductivity in these systems is therefore key to their commercial viability. Here, we show that geometric frustration can be exploited as a vehicle for conductivity tuning. In particular, we imposed geometric frustration upon a prototypical system, CaF2, by ball milling it with BaF2, to create nanostructured Ba1–xCaxF2 solid solutions and increased its ionic conductivity by over 5 orders of magnitude. By mirroring each experiment with MD simulation, including “simulating synthesis”, we reveal that geometric frustration confers, on a system at ambient temperature, structural and dynamical attributes that are typically associated with heating a material above its superionic transition temperature. These include structural disorder, excess volume, pseudovacancy arrays, and collective transport mechanisms; we show that the excess volume correlates with ionic conductivity for the Ba1–xCaxF2 system. We also present evidence that geometric frustration-induced conductivity is a general phenomenon, which may help explain the high ionic conductivity in doped fluorite-structured oxides such as ceria and zirconia, with application for solid oxide fuel cells. A review on geometric frustration [ Nature 2015, 521, 303] remarks that classical crystallography is inadequate to describe systems with correlated disorder, but that correlated disorder has clear crystallographic signatures. Here, we identify two possible crystallographic signatures of geometric frustration: excess volume and correlated “snake-like” ionic transport; the latter infers correlated disorder. In particular, as one ion in the chain moves, all the other (correlated) ions in the chain move simultaneously. Critically, our simulations reveal snake-like chains, over 40 Å in length, which indicates long-range correlation in our disordered systems. Similarly, collective transport in glassy materials is well documented [for example, J. Chem. Phys. 2013, 138, 12A538]. Possible crystallographic nomenclatures, to be used to describe long-range order in disordered systems, may include, for example, the shape, length, and branching of the “snake” arrays. Such characterizations may ultimately provide insight and differences between long-range order in disordered, amorphous, or liquid states and processes such as ionic conductivity, melting, and crystallization

SPRITE and ASSAM: web servers for side chain 3D-motif searching in protein structures

Similarities in the 3D patterns of amino acid side chains can provide insights into their function despite the absence of any detectable sequence or fold similarities. Search for protein sites (SPRITE) and amino acid pattern search for substructures and motifs (ASSAM) are graph theoretical programs that can search for 3D amino side chain matches in protein structures, by representing the amino acid side chains as pseudo-atoms. The geometric relationship of the pseudo-atoms to each other as a pattern can be represented as a labeled graph where the pseudo-atoms are the graph's nodes while the edges are the inter-pseudo-atomic distances. Both programs require the input file to be in the PDB format. The objective of using SPRITE is to identify matches of side chains in a query structure to patterns with characterized function. In contrast, a 3D pattern of interest can be searched for existing occurrences in available PDB structures using ASSAM. Both programs are freely accessible without any login requirement. SPRITE is available at http://mfrlab.org/grafss/sprite/while ASSAM can be accessed at http://mfrlab.org/grafss/assam/

Ga+, In+ and Tl+ Impurities in Alkali Halide Crystals: Distortion Trends

A computational study of the doping of alkali halide crystals (AX: A = Na, K; X = Cl, Br) by ns2 cations (Ga+, In+ and Tl+) is presented. Active clusters of increasing size (from 33 to 177 ions) are considered in order to deal with the large scale distortions induced by the substitutional impurities. Those clusters are embedded in accurate quantum environments representing the surrounding crystalline lattice. The convergence of the distortion results with the size of the active cluster is analyced for some selected impurity systems. The most important conclusion from this study is that distortions along the (100) and (110) crystallographic directions are not independent. Once a reliable cluster model is found, distortion trends as a function of impurity, alkali cation and halide anion are identified and discussed. These trends may be useful when analycing other cation impurities in similar host lattices.Comment: LaTeX file. 7 pages and 2 pictures. Accepted for publication in J. Chem. Phy

Strongly Bound Surface Water Affects the Shape Evolution of Cerium Oxide Nanoparticles

The surface structure and composition of functional materials are well-known to be critically important factors controlling the surface reactivity. However, when doped the surface composition will change, and the challenge is to identify its impact on important surface processes and nanoparticle morphologies. We have begun to address this by using a combination of density functional theory and potential-based methods to investigate the effect of surface dopants on water adsorption and morphology of the technologically important material, CeO$_2$, which finds application as electrolyte in SOFCs, catalyst in soot combustion, and enzyme mimetic agents in biomedicine. We show that by mapping CeO$_2$ surface phase diagrams we can predict nanoparticle morphologies as a function of dopant, temperature, and water partial pressure. Our results show that low-temperature, undoped CeO$_2$ nanocubes with active {100} surface sites are thermodynamically stable, but at the typical high temperature, operating conditions favor polyhedra where {100} surfaces are replaced by less active {111} surfaces by surface ion migration. However, doping with trivalent cations, such as Gd$^{3+}$, will increase binding of water on the {100} surfaces and hence act to preserve the cuboidal architecture by capping the active surfaces. As surfaces tend to be decorated by impurities and dopants it is clear that their role should receive more attention and the approach we describe can be routinely applied to nanomaterials, morphologies, and associated active/inactive surfaces

Amorphisation and recrystallisation study of lithium intercalation into TiO 2 nano-architecture.

Titanium dioxide is playing an increasingly significant role in easing environmental and energy concerns. Its rich variety of polymorphic crystal structures has facilitated a wide range of applications such as photo-catalysis, photo-splitting of water, photoelectrochromic devices, insulators in metal oxide, semiconductors devices, dye sensitized solar cells (DSSCs) (energy conversions), rechargeable lithium batteries (electrochemical storage). The complex structural aspects in nano TiO 2 , are elucidated by microscopic visualization and quantification of the microstructure for electrode materials, since cell performance and various aging mechanisms depend strongly on the appearance and changes in the microstructure. Recent studies on MnO 2 have demonstrated that amorphisation and recrystallisation simulation method can adequately generate various nanostructures, for Li-ion battery compounds. The method was also previously employed to produce nano-TiO 2 . In the current study, the approach is used to study lithiated nanoporous structure for TiO 2 which have been extensively studied experimentally, as mentioned above. Molecular graphic images showing microstructural features, including voids and channels have accommodated lithium’s during lithiation and delithiation. Preliminary lithiation of TiO 2 will be considered