313 research outputs found

    Thermodynamic conditions during growth determine the magnetic anisotropy in epitaxial thin-films of La0.7_{0.7}Sr0.3_{0.3}MnO3_{3}

    Get PDF
    The suitability of a particular material for use in magnetic devices is determined by the process of magnetization reversal/relaxation, which in turn depends on the magnetic anisotropy. Therefore, designing new ways to control magnetic anisotropy in technologically important materials is highly desirable. Here we show that magnetic anisotropy of epitaxial thin-films of half-metallic ferromagnet La0.7_{0.7}Sr0.3_{0.3}MnO3_{3} (LSMO) is determined by the proximity to thermodynamic equilibrium conditions during growth. We performed a series of X-ray diffraction and ferromagnetic resonance (FMR) experiments in two different sets of samples: the first corresponds to LSMO thin-films deposited under tensile strain on (001) SrTiO3_{3} by Pulsed Laser Deposition (PLD; far from thermodynamic equilibrium); the second were deposited by a slow Chemical Solution Deposition (CSD) method, under quasi-equilibrium conditions. Thin films prepared by PLD show a in-plane cubic anisotropy with an overimposed uniaxial term. A large anisotropy constant perpendicular to the film plane was also observed in these films. However, the uniaxial anisotropy is completely suppressed in the CSD films. The out of plane anisotropy is also reduced, resulting in a much stronger in plane cubic anisotropy in the chemically synthesized films. This change is due to a different rotation pattern of MnO6_{6} octahedra to accomodate epitaxial strain, which depends not only on the amount of tensile stress imposed by the STO substrate, but also on the growth conditions. Our results demonstrate that the nature and magnitude of the magnetic anisotropy in LSMO can be tuned by the thermodynamic parameters during thin-film deposition.Comment: 6 pages, 8 Figure

    Determination of texture by infrared spectroscopy in titanium oxide–anatase thin films

    Get PDF
    12 pages, 6 figures, 4 tables, 2 appendix.-- PACS: 68.55.Jk; 78.66.Nk; 78.30.HvA theoretical model to determine the effective dielectric tensor of heterogeneous materials composed by anisotropic microcrystallites has been introduced to explain the infrared spectral features of textured thin films of uniaxial materials as the function of a textural parameter. This theoretical treatment is able to satisfactorily reproduce the experimental absorbance spectra of TiO2–anatase thin films chosen as a model system. Comparison of texture data obtained from infrared spectroscopy and x-ray diffraction are in good agreement which support the validity of the proposed model.Peer reviewe

    Engineering the microstructure and magnetism of La2_2CoMnO6_6 thin films by tailoring oxygen stoichiometry

    Get PDF
    We report on the magnetic and structural properties of ferromagnetic-insulating La2_2CoMnO6_6 thin films grown on top of (001) STO substrates by means of RF sputtering technique. Careful structural analysis, by using synchrotron X-ray diffraction, allows identifying two different crystallographic orientations that are closely related to oxygen stoichiometry and to the features (coercive fields and remanence) of the hysteresis loops. Both Curie temperature and magnetic hysteresis turn out to be dependent on the oxygen stoichiometry. In situ annealing conditions allow tailoring the oxygen content of the films, therefore controlling their microstructure and magnetic properties

    A high-entropy manganite in an ordered nanocomposite for long-term application in solid oxide cells.

    Get PDF
    The implementation of nano-engineered composite oxides opens up the way towards the development of a novel class of functional materials with enhanced electrochemical properties. Here we report on the realization of vertically aligned nanocomposites of lanthanum strontium manganite and doped ceria with straight applicability as functional layers in high-temperature energy conversion devices. By a detailed analysis using complementary state-of-the-art techniques, which include atom-probe tomography combined with oxygen isotopic exchange, we assess the local structural and electrochemical functionalities and we allow direct observation of local fast oxygen diffusion pathways. The resulting ordered mesostructure, which is characterized by a coherent, dense array of vertical interfaces, shows high electrochemically activity and suppressed dopant segregation. The latter is ascribed to spontaneous cationic intermixing enabling lattice stabilization, according to density functional theory calculations. This work highlights the relevance of local disorder and long-range arrangements for functional oxides nano-engineering and introduces an advanced method for the local analysis of mass transport phenomena

    Rapid determination of colistin resistance in clinical strains of acinetobacter baumannii by use of the micromax assay

    Full text link
    Colistin is an old antibiotic which has been used as a therapeutic option for carbapenem- and multidrug-resistant Gram-negative bacteria, like Acinetobacter baumannii. This pathogen produces life-threatening infections, mainly in patients admitted to intensive care units. Rapid detection of resistance to colistin may improve patient outcomes and prevent the spread of resistance. For this purpose, Micromax technology was evaluated in four isogenic A. baumannii strains with known mechanisms of resistance to colistin and in 66 isolates (50 susceptible and 16 resistant). Two parameters were determined, DNA fragmentation and cell wall damage. To assess DNA fragmentation, cells trapped in a microgel were incubated with a lysing solution to remove the cell wall, and the released nucleoids were visualized under fluorescence microscopy. Fragmented DNA was observed as spots that diffuse from the nucleoid. To assess cell wall integrity, cells were incubated with a lysis solution which removes only weakened cell walls, resulting in nucleoid release exclusively in affected cells. A dose-response relationship was demonstrated between colistin concentrations and the percentages of bacteria with DNA fragmentation and cell wall damage, antibiotic effects that were delayed and less frequent in resistant strains. Receiver operating characteristic (ROC) curves demonstrated that both DNA fragmentation and cell wall damage were excellent parameters for identifying resistant strains. Obtaining<11% of bacteria with cell wall damage after incubation with 0.5 g/ml colistin identified resistant strains of A. baumannii with 100% sensitivity and 96% specificity. Results were obtained in 3 h 30 min. This is a simple, rapid, and accurate assay for detecting colistin resistance in A. baumannii, with strong potential value in critical clinical situationsThis work has been supported by MagicBullet, Xunta de Galicia 10CSA916020PR, and by REIPI, the Spanish Network for Research in Infectious Diseases (Instituto de Salud Carlos III, REIPI RD12/0015) and the Fondo de Investigaciones Sanitarias (FIS PI12/00552) to G.B. M.J.M. is supported by the Subprograma Miguel Servet from the Ministerio de Economía y Competitividad of Spain (CP11/00314). MagicBullet is a project funded by the European Union–Directorate General for Research and Innovation through the Seventh Framework Program for Research and Development (grant agreement 278232) and has been running since 1 January 2012 (36 months’ duration

    Revealing Strain Effects on the Chemical Composition of Perovskite Oxide Thin Films Surface, Bulk, and Interfaces

    Get PDF
    Understanding the effects of lattice strain on oxygen surface and diffusion kinetics in oxides is a controversial subject that is critical for developing efficient energy storage and conversion materials. In this work, high-quality epitaxial thin films of the model perovskite LaSrMnCoO (LSMC), under compressive or tensile strain, are characterized with a combination of in situ and ex situ bulk and surface-sensitive techniques. The results demonstrate a nonlinear correlation of mechanical and chemical properties as a function of the operation conditions. It is observed that the effect of strain on reducibility is dependent on the "effective strain" induced on the chemical bonds. In-plain strain, and in particular the relative BO length bond, is the key factor controlling which of the B-site cation can be reduced preferentially. Furthermore, the need to use a set of complimentary techniques to isolate different chemically induced strain effects is proven. With this, it is confirmed that tensile strain favors the stabilization of a more reduced lattice, accompanied by greater segregation of strontium secondary phases and a decrease of oxygen exchange kinetics on LSMC thin films

    Gate current analysis of AlGaN/GaN on silicon heterojunction transistors at the nanoscale

    Get PDF
    The gate leakage current of AlGaN/GaN (on silicon)high electron mobility transistor(HEMT) is investigated at the micro and nanoscale. The gate current dependence (25-310 °C) on the temperature is used to identify the potential conduction mechanisms, as trap assisted tunneling or field emission. The conductive atomic force microscopy investigation of the HEMT surface has revealed some correlation between the topography and the leakage current, which is analyzed in detail. The effect of introducing a thin dielectric in the gate is also discussed in the micro and the nanoscale
    • …
    corecore