43 research outputs found
Zitterbewegung of a heavy hole in presence of spin-orbit interactions
We study the of a heavy hole in presence of both cubic
Rashba and cubic Dresselhaus spin-orbit interactions. On contrary to the
electronic case, does not vanish for equal strength of Rashba
and Dresselhaus spin-orbit interaction. This non-vanishing of
is associated with the Berry phase. Due to the presence of the spin-orbit
coupling the spin associated with the heavy hole precesses about an effective
magnetic field. This spin precession produces a transverse spin-orbit force
which also generates an electric voltage associated with . We
have estimated the magnitude of this voltage for a possible experimental
detection of .Comment: 6 pages, 3 figure
Phase transformation, Mechanical Properties and Corrosion Behavior of 304L Austenitic Stainless Steel Rolled at Room and Cryo Temperatures
The present work investigates the effect of rolling (90% thickness reduction) on phase transformation, mechanical properties, and corrosion behaviour of 304L-austenitic stainless steel through cryorolling and room temperature rolling. The processed steel sheets were characterised through X-ray diffraction (XRD), electron backscattered diffraction (EBSD), and vibrating sample magnetometer (VSM). The analysis of XRD patterns, EBSD scan, and vibrating sample magnetometer results confirmed the transformation of the austenitic phase to the martensitic phase during rolling. Cryorolling resulted in improved tensile strength and microhardness of 1808 MPa and 538 VHN, respectively, as compared to 1566 MPa and 504 VHN for room temperature rolling. The enhancement in properties of cryorolled steel is attributed to its higher dislocation density compared to room temperature rolled steel. The corrosion behaviour was assessed via linear polarisation corrosion tests. Corrosion resistance was found to decrease with increasing rolling reduction in both room temperature rolled and cryorolled specimens
Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion
The present work unravels the effect of nickel (Ni) addition on the deformation mechanism and hardness evolution in a Fe40Mn40Co10Cr10 high entropy alloy (HEA) during high-pressure torsion (HPT) processing. For this purpose, two variants of the high entropy Cantor alloy, with compositions (atomic%) Fe40Mn40Co10Cr10 (Ni0 alloy) and Fe35Mn35Co10Cr10Ni10 (Ni10 alloy) were selected. The study revealed a transition in the predominant plasticity mechanism with addition of Ni from TRIP in Ni0 to dislocation slip in Ni10 alloy. Such transition of plasticity mechanism was the direct consequence of an increase in the free energy of phase transformation, delta G(gamma ->epsilon) towards a more positive value with Ni addition. Interestingly, the Ni10 alloy showed a greater extent of nano-structuring than the Ni0 alloy with nearly three-fold refined grain sizes, that is, lesser than 30 nm in Ni10 alloy and ~90 nm in Ni0 alloy. Furthermore, a 3-4 times higher dislocation density was observed in the FCC phase of the Ni10 alloy compared to that in the transformed HCP phase in the Ni0 alloy for any given HPT processing conditions. These differences in mechanism(s) of deformation and the extent of nano-structuring manifested as a greater ability of Ni added Ni10 alloy to harden itself during HPT. The present study suggests that a large fraction of hard HCP phase originating from TRIP effect in the Ni0 alloy has a lower hardening ability than the high dislocation density and nano-structuring in the Ni10 alloy
Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal
Grain boundary character distributions in 410NiMo weld metal were studied in the as-welded, first-stage, and second-stage postweld heat treatment (PWHT) conditions, and these were correlated with the Charpy-V impact toughness values of the material. The high impact toughness values in the weld metal in the as-welded and first-stage PWHT conditions compared to that in the second-stage condition are attributed to the higher fraction of low-energy I pound boundaries. A higher volume fraction of retained austenite and coarser martensite after second-stage PWHT accompanied by the formation of the ideal cube component in the 2-hour heat-treated specimen led to a reduction in the toughness value. A subsequent increase in the PWHT duration at 873 K (600 A degrees C) enhanced the formation of {111}aOE (c) 112 >, which impedes the adverse effect of the cubic component, resulting in an increase in the impact toughness. In addition to this, grain refinement during 4-hour PWHT in the second stage also increased the toughness of the weld metal
Blue carbon stock of the Bangladesh Sundarban mangroves: what could be the scenario after a century?
The total blue carbon stock of the Bangladesh Sundarban mangroves was evaluated and the probable future status after a century was predicted based on the recent trend of changes in the last 30 years and implementing a hybrid model of Markov Chain and Cellular automata. At present 36.24 Tg C and 54.95 Tg C are stored in the above-ground and below-ground compartments respectively resulting in total blue carbon stock of 91.19 Tg C. According to the prediction 15.88 Tg C would be lost from this region by the year 2115. The low saline species composition classes dominated mainly by Heritiera spp. accounts for the major portion of the carbon sock at present (45.60 Tg C), while the highly saline regions stores only 14.90 Tg C. The prediction shows that after a hundred years almost 22.42 Tg C would be lost from the low saline regions accompanied by an increase of 8.20 Tg C in the high saline regions dominated mainly by Excoecaria sp. and Avicennia spp. The net carbon loss would be due to both mangrove area loss (~ 510 km2) and change in species composition leading to 58.28 Tg of potential CO2 emission within the year 2115
Blue Carbon Stock of the Bangladesh Sundarban Mangroves: What could Be the Scenario after a Century?
Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries
Abstract
Background
Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres.
Methods
This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries.
Results
In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia.
Conclusion
This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries
Texture evolution in an aluminum alloy processed by ECAP with concurrent precipitate fragmentation
The textural evolution of a spray-cast aluminum 7034 alloy was investigated during processing by equal-channel angular pressing (ECAP). Texture weakening was observed after the initial pass but there was evidence for texture strengthening after six passes. The initial deviation from the ideal shear texture components and from the predicted ECAP texture components is attributed to the occurrence of strain relaxation due to extensive precipitate fragmentation in the early stages of ECAP
Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy
Over recent years there have been a remarkable number of studies dealing with compression of magnesium. A literature search, however, shows a noticeably less number of papers concerned with tension and a very few papers comparing both modes, systematically, in one study. The current investigation reports the anisotropic deformation behavior and concomitant texture and microstructure evolution investigated in uniaxial tension and compression tests in two sample directions performed on an extruded commercial magnesium alloy AZ31 at different Z conditions. For specimens with the loading direction parallel to the extrusion axis, the tension–compression strength anisotropy was pronounced at high Z conditions. Loading at 45° from the extrusion axis yielded a tension–compression strength behavior that was close to isotropic. During tensile loading along the extrusion direction the extrusion texture resists twinning and favors prismatic slip (contrary to compression). This renders the shape change maximum in the basal plane and equal to zero along the c-axis, which resulted in the orientation of individual grains remaining virtually intact during all tension tests at different Z conditions. For the other investigated sample direction, straining was accommodated along the c-axis, which was associated with a lattice rotation, and thus, a change of crystal orientation. Uniaxial compression at a low Z condition (400 °C/10−4 s−1) yielded a desired texture degeneration, which was explained on the basis of a more homogeneous partitioning of slip systems that reduces anisotropy and enhanced dynamic recrystallization (DRX), which counteracts the strong deformation texture. The critical strains for the nucleation of DRX in tensiled specimens at the highest investigated Z condition (200 °C/10−2 s−1) were found to range between 4% and 5.6%