104 research outputs found

    Tattoo Antenna Temporary Transfers Operating On-Skin (TATTOOS)

    Get PDF
    This paper discusses the development of RFID logo antennas based on the logos of Loughborough University and the University of Kent which can be tattooed directly onto the skin’s surface. Hence, this paper uses aesthetic principles to create functional wearable technology. Simulations of possible designs for the tattoo tags have been carried out to optimize their performance. Prototypes of the tag designs were fabricated and read range measurements with the transfer tattoos on a volunteers arm were carried out to test the performance. Measured Read ranges of approximately 0.5 m have been achieved with the antenna 10 ”m from the body

    Water-based and Biocompatible 2D Crystal Inks: from Ink Formulation to All- Inkjet Printed Heterostructures

    Full text link
    Fully exploiting the properties of 2D crystals requires a mass production method able to produce heterostructures of arbitrary complexity on any substrate, including plastic. Solution processing of graphene allows simple and low-cost techniques such as inkjet printing to be used for device fabrication. However, available inkjet printable formulations are still far from ideal as they are either based on toxic solvents, have low concentration, or require time-consuming and expensive formulation processing. In addition, none of those formulations are suitable for thin-film heterostructure fabrication due to the re-mixing of different 2D crystals, giving rise to uncontrolled interfaces, which results in poor device performance and lack of reproducibility. In this work we show a general formulation engineering approach to achieve highly concentrated, and inkjet printable water-based 2D crystal formulations, which also provides optimal film formation for multi-stack fabrication. We show examples of all-inkjet printed heterostructures, such as large area arrays of photosensors on plastic and paper and programmable logic memory devices, fully exploiting the design flexibility of inkjet printing. Finally, dose-escalation cytotoxicity assays in vitro also confirm the inks biocompatible character, revealing the possibility of extending use of such 2D crystal formulations to drug delivery and biomedical applications

    Heterostructures produced from nanosheet-based inks.

    Get PDF
    The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transfer of individual 2D crystals, though allowing exceptional control over the quality of such structures and interfaces, is not scalable. Here we show that such heterostructures can be assembled from chemically exfoliated 2D crystals, allowing for low-cost and scalable methods to be used in device fabrication.This work was supported by The Royal Society, U.S. Army, European Science Foundation (ESF) under the EUROCORES Programme EuroGRAPHENE (GOSPEL), European Research Council, and EC under the Graphene Flagship (contract no. CNECT-ICT-604391). Y.-J.K.’s work was supported by the Global Research Laboratory (GRL) Program (2011-0021972) of the Ministry of Education, Science and Technology, Korea. F.W. acknowledges support from the Royal Academy of Engineering; A.F. is a FRS-FNRS Research Fellow

    A video guide of five access methods to the splenic flexure: the concept of the splenic flexure box

    Get PDF
    Aim: The aim of this study was to describe all the possible approaches for laparoscopic splenic flexure mobilization (SFM), each suitable for specific situations, and create an illustrated system to show SFM approaches in an easy and practical way to make it easy to learn and teach. Methods: Two different phases. First part: Cadaver-based study of the colonic splenic flexure anatomy. In order to demonstrate the different approaches, a balloon was placed through the colonic hepatic flexure in the lesser sac without sectioning any of the fixing ligaments of the splenic flexure. Second part: A real case series of laparoscopic SFM. Results: First part: 11 cadavers were dissected. Five potential approaches to SFM were found: anterior, trans-omentum, lateral, medial infra-mesocolic, and medial trans-mesocolic. The illustrative system developed was named: Splenic Flexure “Box”(SFBox). Second part: One of the types of SFM described in first part was used in five patients with colorectal cancer. Each laparoscopic approach to the splenic flexure was illustrated in a video accompanied by illustration aids delineating the access. Conclusion: With the cadaver dissection and subsequent demonstration in real-life laparoscopic surgery, we have shown five types of laparoscopic splenic flexure mobilization. The Splenic Flexure “Box” is a useful way to learn and teach this surgical maneuver

    Heterostructures produced from nanosheet-based inks

    Full text link
    The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transfer of individual 2D crystals, though allowing exceptional control over the quality of such structures and interfaces, is not scalable. Here we show that such heterostructures can be assembled from chemically exfoliated 2D crystals, allowing for low-cost and scalable methods to be used in the device fabrication

    Inkjet printed paper based frequency selective surfaces and skin mounted RFID tags : the interrelation between silver nanoparticle ink, paper substrate and low temperature sintering technique Citation for published version (APA): Inkjet printed paper base

    Get PDF
    Inkjet printing of functional frequency selective surfaces (FSS) and radio frequency identification (RFID) tags on commercial paper substrates using silver nanoparticle inks sintered using low temperature thermal, plasma and photonic techniques is reported. Printed and sintered FSS devices demonstrate performances which achieve wireless communication requirements having a forward transmission scattering parameter, S 21 , depth greater than À20 dB at 13 GHz. Printed and plasma sintered RFID tags on transfer paper, which are capable of being mounted on skin, improved read distances compared to previously reported single layer transfer RFID tags fabricated by conventional thermal sintering

    Plasma Elaidic Acid Level as Biomarker of Industrial Trans Fatty Acids and Risk of Weight Change: Report from the EPIC Study

    Get PDF
    Background Few epidemiological studies have examined the association between dietary trans fatty acids and weight gain, and the evidence remains inconsistent. The main objective of the study was to investigate the prospective association between biomarker of industrial trans fatty acids and change in weight within the large study European Prospective Investigation into Cancer and Nutrition (EPIC) cohort. Methods Baseline plasma fatty acid concentrations were determined in a representative EPIC sample from the 23 participating EPIC centers. A total of 1,945 individuals were followed for a median of 4.9 years to monitor weight change. The association between elaidic acid level and percent change of weight was investigated using a multinomial logistic regression model, adjusted by length of follow-up, age, energy, alcohol, smoking status, physical activity, and region. Results In women, doubling elaidic acid was associated with a decreased risk of weight loss (odds ratio (OR) = 0.69, 95% confidence interval (CI) = 0.55-0.88, p = 0.002) and a trend was observed with an increased risk of weight gain during the 5-year follow-up (OR = 1.23, 95% CI = 0.97-1.56, p = 0.082) (p-trend<.0001). In men, a trend was observed for doubling elaidic acid level and risk of weight loss (OR = 0.82, 95% CI = 0.66-1.01, p = 0.062) while no significant association was found with risk of weight gain during the 5-year follow-up (OR = 1.08, 95% CI = 0.88-1.33, p = 0.454). No association was found for saturated and cis-monounsaturated fatty acids. Conclusions These data suggest that a high intake of industrial trans fatty acids may decrease the risk of weight loss, particularly in women. Prevention of obesity should consider limiting the consumption of highly processed foods, the main source of industrially-produced trans fatty acids

    How Did the COVID-19 Lockdown Pandemic Affect the Depression Symptomatology in Mediterranean Older Adults with Metabolic Syndrome?

    Full text link
    Background and Aims. To control the COVID-19 spread, in March 2020, a forced home lockdown was established in Spain. In the present study, we aimed to assess the effect of mobility and social COVID-19-established restrictions on depressive symptomatology in older adults with metabolic syndrome. We hypothesize that severe restrictions might have resulted in detrimental changes in depressive symptomatology. Methods. 2,312 PREDIMED-Plus study participants (men = 53:9%; mean age = 64:9±4:8 years) who completed a COVID-19 lockdown questionnaire to assess the severity of restrictions/lockdown and the validated Spanish version of the Beck Depression Inventory-II (BDI-II) during the three established phases concerning the COVID-19 lockdown in Spain (prelockdown, lockdown, and postlockdown) were included in this longitudinal analysis. Participants were categorized according to high or low lockdown severity. Analyses of covariance were performed to assess changes in depressive symptomatology across lockdown phases. Results. No significant differences in participant depression symptomatology changes were observed between lockdown severity categories (low/high) at the studied phases. During the lockdown phase, participants showed a decrease in BDI-II score compared to the prelockdown phase (mean (95% CI), -0.48 (-0.24, -0.72), P < 0:001); a nonsignificantly larger decrease was observed in participants allocated in the low-lockdown category (low: -0.59 (-0.95, -0.23), high: -0.43 (-0.67, -0.19)). Similar decreases in depression symptomatology were found for the physical environment dimension. The post- and prelockdown phase BDI-II scores were roughly similar. Conclusions. The COVID-19 pandemic lockdown was associated with a decrease in depressive symptomatology that returned to prelockdown levels after the lockdown. The degree of lockdown was not associated with depressive symptomatology. The potential preventive role of the physical environment and social interactions on mental disorders during forced home lockdown should be further studie

    Dietary diversity and Depression: Cross-sectional and longitudinal analyses in Spanish adult population with Metabolic Syndrome. Findings from PREDIMED-PLUS Trial.

    Full text link
    Objective: To examine the cross-sectional and longitudinal (2-year follow-up) associations between Dietary Diversity (DD) and depressive symptoms. Design: An energy-adjusted Dietary Diversity Score (DDS) was assessed using a validated food-frequency questionnaire and was categorized into quartiles (Q). The variety in each food group was classified into 4 categories of diversity (C). Depressive symptoms were assessed with Beck Depression Inventory-II (Beck II) questionnaire and depression cases defined as physician-diagnosed or Beck II>=18. Linear and logistic regression models were used. Setting: Spanish older adults with Metabolic Syndrome. Participants: A total of 6625 adults aged (55-75 years) from the PREDIMED-Plus study with overweight or obesity and MetS. Results: Total DDS was inversely and statistically significantly associated with depression in the cross-sectional analysis conducted; Odds Ratio (OR) Q4 vs Q1= 0.76 (95% confidence interval (CI): 0.64, 0.90). This was driven by high diversity compared to low diversity (C3 vs. C1) of vegetables [OR (95%CI) = 0.75 (0.57, 0.93)], cereals [OR (95%CI) = 0.72 (0.56-0.94)] and proteins [OR (95%CI) = 0.27 (0.11, 0.62)]. In the longitudinal analysis, there was no significant association between the baseline DDS and changes in depressive symptoms after 2 y- of follow-up, except for DD in vegetables C4 vs C1= [ÎČ (95%CI) = 0.70 (0.05, 1.35)]. Conclusions: According to our results, DD is associated with the presence of depressive symptoms but eating more diverse does not seem to reduce the risk of future depression. Additional longitudinal studies (with longer follow-up period) are needed to confirm these findings

    Total and Subtypes of Dietary Fat Intake and Its Association with Components of the Metabolic Syndrome in a Mediterranean Population at High Cardiovascular Risk

    Get PDF
    Background: The effect of dietary fat intake on the metabolic syndrome (MetS) and in turn on cardiovascular disease (CVD) remains unclear in individuals at high CVD risk. Objective: To assess the association between fat intake and MetS components in an adult Mediterranean population at high CVD risk. Design: Baseline assessment of nutritional adequacy in participants (n = 6560, men and women, 55-75 years old, with overweight/obesity and MetS) in the PREvenciĂłn con DIeta MEDiterrĂĄnea (PREDIMED)-Plus randomized trial. Methods: Assessment of fat intake (total fat, monounsatured fatty acids: MUFA, polyunsaturated fatty acids: PUFA, saturated fatty acids: SFA, trans-fatty acids: trans-FA, linoleic acid, α-linolenic acid, and ω-3 FA) using a validated food frequency questionnaire, and diet quality using 17-item Mediterranean dietary questionnaire and fat quality index (FQI). Results: Participants in the highest quintile of total dietary fat intake showed lower intake of energy, carbohydrates, protein and fiber, but higher intake of PUFA, MUFA, SFA, TFA, LA, ALA and ω-3 FA. Differences in MetS components were found according to fat intake. Odds (5th vs. 1st quintile): hyperglycemia: 1.3-1.6 times higher for total fat, MUFA, SFA and ω-3 FA intake; low high-density lipoprotein cholesterol (HDL-c): 1.2 higher for LA; hypertriglyceridemia: 0.7 lower for SFA and ω-3 FA intake. Conclusions: Dietary fats played different role on MetS components of high CVD risk patients. Dietary fat intake was associated with higher risk of hyperglycemia
    • 

    corecore