Hydrodynamic controls on alluvial ridge construction and avulsion likelihood in meandering river floodplains

This is the author accepted manuscript. The final version is available from Geological Society of America via the DOI in this record.Existing models of alluvial stratigraphy often neglect the hydrodynamic controls on channel belt and floodplain sedimentation, and predict avulsion using topographic metrics, such as channel belt super-elevation (the ratio of alluvial ridge height to channel depth). This study provides a first demonstration of the potential for simulating long-term river floodplain evolution (over >500 floods) using a process-based hydrodynamic model. Simulations considered alluvial ridge construction during the period leading up to an avulsion, and assess the controls on avulsion likelihood. Results illustrate that the balance between within-channel and overbank sedimentation exerts a key control on both super-elevation ratios and on the conveyance of water and sediment to the floodplain. Rapid overbank sedimentation creates high alluvial ridges with deep channels, leading to lower apparent super-elevation ratios, and implying a reduced likelihood of avulsion. However, channel deepening also drives a reduction in channel belt–floodplain connectivity, so that conveyance of water to the distal floodplain is concentrated in a declining number of channel breaches, which may favor avulsion. These results suggest that, while super-elevation ratios in excess of a threshold value may be a necessary condition for a meandering river avulsion, the likelihood of avulsion may not be greatest where the super-elevation ratio is maximized. Instead, optimal conditions for avulsion may depend on channel-floodplain hydrodynamic connectivity, determined by the balance between coarse (channel bed–forming) and fine (floodplain-constructing) sediment delivery. These results highlight a need to rethink the representation of avulsion in existing models of alluvial architecture.This work was funded by UK Natural Environment Research Council grants NE/H009108/1 and NE/H007288/1

Modelling flow through a permeable bed: a combined physical-numerical approach

River hydrodynamicsTurbulent open channel flow and transport phenomen

Response to novel objects and foraging tasks by common marmoset (Callithrix Jacchus) female Pairs

Many studies have shown that environmental enrichment can significantly improve the psychological well-being of captive primates, increasing the occurrence of explorative behavior and thus reducing boredom. The response of primates to enrichment devices may be affected by many factors such as species, sex, age, personality and social context. Environmental enrichment is particularly important for social primates living in unnatural social groupings (i.e. same-sex pairs or singly housed animals), who have very few, or no, benefits from the presence of social companions in addition to all the problems related to captivity (e.g. increased inactivity). This study analyses the effects of enrichment devices (i.e. novel objects and foraging tasks) on the behavior of common marmoset (Callithrix jacchus) female pairs, a species that usually lives in family groups. It aims to determine which aspects of an enrichment device are more likely to elicit explorative behaviors, and how aggressive and stress-related behaviors are affected by its presence. Overall, the marmosets explored foraging tasks significantly longer than novel objects. The type of object, which varied in size, shape and aural responsiveness (i.e. they made a noise when the monkey touched them), did not affect the response of the monkeys, but they explored objects that were placed higher in the enclosure more than those placed lower down.Younger monkeys were more attracted to the enrichment devices than the older ones. Finally, stress-related behavior (i.e. scratching) significantly decreased when the monkeys were presented with the objects; aggressive behavior as unaffected. This study supports the importance of environmental enrichment for captive primates and shows that in marmosets its effectiveness strongly depends upon the height of the device in the enclosure and the presence of hidden food. The findings can be explained ifone considers the foraging behavior of wild common marmosets. Broader applications for the research findings are suggested in relation to enrichment

Quantification of bedform dynamics and bedload sediment flux in sandy braided rivers from airborne and satellite imagery

 This is the author accepted manuscript. The final version is available from Wiley via the DOI in this record Images from specially‐commissioned aeroplane sorties (manned aerial vehicle, MAV), repeat unmanned aerial vehicles (UAVs) surveys, and Planet CubeSat satellites are used to quantify dune and bar dynamics in the sandy braided South Saskatchewan River, Canada. Structure‐from‐Motion (SfM) techniques and application of a depth‐brightness model are used to produce a series of Digital Surface Models (DSMs) at low and near‐bankfull flows. A number of technical and image processing challenges are described that arise from the application of SfM in dry and submerged environments. A model for best practice is outlined and analysis suggests a depth‐brightness model approach can represent the different scales of bedforms present in sandy braided rivers with low‐turbidity and shallow (< 2 m deep) water. The aerial imagery is used to quantify the spatial distribution of unit bar and dune migration rate in an 18 km reach and three ~1 km long reaches respectively. Dune and unit bar migration rates are highly variable in response to local variations in planform morphology. Sediment transport rates for dunes and unit bars, obtained by integrating migration rates (from UAV) with the volume of sediment moved (from DSMs using MAV imagery) show near‐equivalence in sediment flux. Hence, reach‐based sediment transport rate estimates can be derived from unit bar data alone. Moreover, it is shown that reasonable estimates of sediment transport rate can be made using just unit bar migration rates as measured from 2D imagery, including from satellite images, so long as informed assumptions are made regarding average bar shape and height. With recent availability of frequent, repeat satellite imagery, and the ease of undertaking repeat MAV and UAV surveys, for the first time, it may be possible to provide global estimates of bedload sediment flux for large or inaccessible low‐turbidity rivers that currently have sparse information on bedload sediment transport rates.Natural Environment Research Council (NERC

Rapid construction of mycobacterial mutagenesis vectors using ligation-independent cloning

Targeted mutagenesis is one of the major tools for determining the function of a given gene and its involvement in bacterial pathogenesis. In mycobacteria, gene deletion is often accomplished by using allelic exchange techniques that commonly utilise a suicide delivery vector. We have adapted a widely-used suicide delivery vector (p1NIL) for cloning two flanking regions of a gene using ligation independent cloning (LIC). The pNILRB plasmid series produced allow a faster, more efficient and less laborious cloning procedure. In this paper we describe the making of pNILRB5, a modified version of p1NIL that contains two pairs of LIC sites flanking either a sacB or a lacZ gene. We demonstrate the success of this technique by generating 3 mycobacterial mutant strains. These vectors will contribute to more high-throughput methods of mutagenesis

Three-dimensional modelling of a very large river the Río Paraná

River hydrodynamicsBed roughness and flow resistanc

Tertiary-Treated Municipal Wastewater is a Significant Point Source of Antibiotic Resistance Genes Into Duluth-Superior Harbor

In this study, the impact of tertiary-treated municipal wastewater on the quantity of several antibiotic resistance determinants in Duluth-Superior Harbor was investigated by collecting surface water and sediment samples from 13 locations in Duluth-Superior Harbor, the St. Louis River, and Lake Superior. Quantitative PCR (qPCR) was used to target three different genes encoding resistance to tetracycline (tet(A), tet(X), and tet(W)), the gene encoding the integrase of class 1 integrons (intI1), and total bacterial abundance (16S rRNA genes) as well as total and human fecal contamination levels (16S rRNA genes specific to the genus Bacteroides). The quantities of tet(A), tet(X), tet(W), intI1, total Bacteroides, and human-specific Bacteroides were typically 20-fold higher in the tertiary-treated wastewater than in nearby surface water samples. In contrast, the quantities of these genes in the St. Louis River and Lake Superior were typically below detection. Analysis of sequences of tet(W) gene fragments from four different samples collected throughout the study site supported the conclusion that tertiary-treated municipal wastewater is a point source of resistance genes into Duluth-Superior Harbor. This study demonstrates that the discharge of exceptionally treated municipal wastewater can have a statistically significant effect on the quantities of antibiotic resistance genes in otherwise pristine surface waters

A Staphylococcus aureus ypfP mutant with strongly reduced lipoteichoic acid (LTA) content: LTA governs bacterial surface properties and autolysin activity

Many Gram-positive bacteria produce lipoteichoic acid (LTA) polymers whose physiological roles have remained a matter of debate because of the lack of LTA-deficient mutants. The ypfP gene responsible for biosynthesis of a glycolipid found in LTA was deleted in Staphylococcus aureus SA113, causing 87% reduction of the LTA content. Mass spectrometry and nuclear magnetic resonance spectroscopy revealed that the mutant LTA contained a diacylglycerol anchor instead of the glycolipid, whereas the remaining part was similar to the wild-type polymer except that it was shorter. The LTA mutant strain revealed no major changes in patterns of cell wall proteins or autolytic enzymes compared with the parental strain indicating that LTA may be less important in S. aureus protein attachment than previously thought. However, the autolytic activity of the mutant was strongly reduced demonstrating a role of LTA in controlling autolysin activity. Moreover, the hydrophobicity of the LTA mutant was altered and its ability to form biofilms on plastic was completely abrogated indicating a profound impact of LTA on physicochemical properties of bacterial surfaces. We propose to consider LTA and its biosynthetic enzymes as targets for new antibiofilm strategies

Typing of Salmonella Typhi strains isolated from Egypt by RAPD PCR

PCR-based fingerprinting using random amplified polymorphic DNA (RAPD) has been used widely for genome identification. In this study, 13 Salmonella Typhi strains were isolated from typhoid patients from Aswan, Cairo, Fayoum, and Monofya Governorates of Egypt. The isolates, along with three reference strains, i.e., O901, H901, and Ty2 were subjected to whole genome typing by RAPD PCR. Three RAPD-PCR 10-mer primers generated a total of 85 RAPD bands (81 polymorphic bands), 12 distinct PCR profiles, and proved to be useful for discriminating the isolates and strains studied. Interestingly, the B1 and C1 PCR profile were found only in Cairo and Monofya, respectively; and some PCR types appeared only in certain Governorates of Egypt. By combining the profiles obtained with the primer trio used in this study, an excellent discrimination index (D) of 0.942 was reached. Pairwise comparisons of Jaccard’s similarity coefficients calculated among the 12 PCR types identified three major clusters; i.e., O901 branch and Ty2 and H901 sub-branches. Principal component analysis adequately resolved each of these three major clusters. Three principal components accounted for about 72% of the variation, with the first two components accounting for about 62% of the total variance among the genotypes studied. Biclustering improved the display of groups of RAPD amplicons (markers) that cluster similarly across the genomes and could delineate features pertaining to genome structure. In conclusion, RAPD PCR provided a fast method with high potentials in surveillance and epidemiological investigations of Salmonella Typhi infections

Chemical Screening Method for the Rapid Identification of Microbial Sources of Marine Invertebrate-Associated Metabolites

Marine invertebrates have proven to be a rich source of secondary metabolites. The growing recognition that marine microorganisms associated with invertebrate hosts are involved in the biosynthesis of secondary metabolites offers new alternatives for the discovery and development of marine natural products. However, the discovery of microorganisms producing secondary metabolites previously attributed to an invertebrate host poses a significant challenge. This study describes an efficient chemical screening method utilizing a 96-well plate-based bacterial cultivation strategy to identify and isolate microbial producers of marine invertebrate-associated metabolites