5,938 research outputs found
Onset of phase correlations in YBa2Cu3O{7-x} as determined from reversible magnetization measurements
Isofield magnetization curves are obtained and analyzed for three single
crystals of YBa2Cu3O{7-x}, ranging from optimally doped to very underdoped, as
well as the BCS superconductor Nb, in the presence of magnetic fields applied
both parallel and perpendicular to the planes. Near Tc, the magnetization
exhibits a temperature dependence \sqrt{M} [Ta(H)-T]^m. In accordance with
recent theories, we associated Ta(H) with the onset of coherent phase
fluctuations of the superconducting order parameter. For Nb and optimally doped
YBaCuO, Ta(H) is essentially identical to the mean-field transition line Tc(H).
The fitting exponent m=0.5 takes its mean-field value for Nb, and varies just
slightly from 0.5 for optimally doped YBaCuO. However, underdoped YBCO samples
exhibit anomalous behavior, with Ta(H)>Tc for H applied parallel to the c axis,
suggesting that the magnetization is probing a region of temperatures above Tc
where phase correlations persist. In this region, the fitting exponent falls in
the range 0.5 < m < 0.8 for H\parallel c, compared with m~0. for $H\parallel ab
planes. The results are interpreted in terms of an anisotropic pairing symmetry
of the order parameter: d-wave along the ab planes and s-wave along the c axis.Comment: 5 pages, 4 figure
Non-centro-symmetric superconductors Li2Pd3B and Li2(Pd0.8Pt0.2)3B: amplitude and phase fluctuations analysis of the experimental magnetization data
We report on magnetization data obtained as a function of temperature and
magnetic field in Li2 (Pd0.8Pt0.2)3B and Li2Pd3B non-centro-symmetric
superconductors. Reversible magnetization curves were plotted as M1/2 vs. T.
This allows study of the asymptotic behavior of the averaged order parameter
amplitude (gap) near the superconducting transition. Results of the analysis
show, as expected, a mean field superconducting transition for Li2Pd3B. On
contrary, a large deviation from the mean field behavior is revealed for
Li2(Pd0.8Pt0.2)3B. This is interpreted as due to the strength of the non s-wave
spin-triplet pairing in this Pt-containing compound which produces nodes in the
order parameter and consequently, phase fluctuations. The diamagnetic signal
above Tc(H) in Li2Pd3B is well explained by superconducting Gaussian
fluctuations, which agrees with the observed mean field transition. For
Li2(Pd0.8Pt0.2)3B the diamagnetic signal above Tc(H) is much higher than the
expected Gaussian values and appears to be well explained by three dimensional
critical fluctuations of the lowest-Landau-level type, which somehow agrees
with the scenario of a phase mediated transition.Comment: 7 pages (1 column) 3 figure
Magnetic fluctuation power near proton temperature anisotropy instability thresholds in the solar wind
The proton temperature anisotropy in the solar wind is known to be
constrained by the theoretical thresholds for pressure anisotropy-driven
instabilities. Here we use approximately 1 million independent measurements of
gyroscale magnetic fluctuations in the solar wind to show for the first time
that these fluctuations are enhanced along the temperature anisotropy
thresholds of the mirror, proton oblique firehose, and ion cyclotron
instabilities. In addition, the measured magnetic compressibility is enhanced
at high plasma beta () along the mirror instability
threshold but small elsewhere, consistent with expectations of the mirror mode.
The power in this frequency (the 'dissipation') range is often considered to be
driven by the solar wind turbulent cascade, an interpretation which should be
qualified in light of the present results. In particular, we show that the
short wavelength magnetic fluctuation power is a strong function of
collisionality, which relaxes the temperature anisotropy away from the
instability conditions and reduces correspondingly the fluctuation power.Comment: 4 pages, 4 figure
On dynamical net-charge fluctuations within a hadron resonance gas approach
The dynamical net-charge fluctuations () in different particle
ratios , , and are calculated from the hadron resonance
gas (HRG) model and compared with STAR central Au+Au collisions at
GeV and NA49 central Pb+Pb collisions at
GeV. The three charged-particle ratios (,
, and ) are determined as total and average of opposite and
average of same charges. We find an excellent agreement between the HRG
calculations and the experimental measurements, especially from STAR beam
energy scan (BES) program, while the strange particles in the NA49 experiment
at lower Super Proton Synchrotron (SPS) energies are not reproduced by the HRG
approach. We conclude that the utilized HRG version seems to take into
consideration various types of correlations including strong interactions
through the heavy resonances and their decays especially at BES energies.Comment: 8 pages, 1 figure, accepted for publication in Advances in High
Energy Physic
A Robust Solution Procedure for Hyperelastic Solids with Large Boundary Deformation
Compressible Mooney-Rivlin theory has been used to model hyperelastic solids,
such as rubber and porous polymers, and more recently for the modeling of soft
tissues for biomedical tissues, undergoing large elastic deformations. We
propose a solution procedure for Lagrangian finite element discretization of a
static nonlinear compressible Mooney-Rivlin hyperelastic solid. We consider the
case in which the boundary condition is a large prescribed deformation, so that
mesh tangling becomes an obstacle for straightforward algorithms. Our solution
procedure involves a largely geometric procedure to untangle the mesh: solution
of a sequence of linear systems to obtain initial guesses for interior nodal
positions for which no element is inverted. After the mesh is untangled, we
take Newton iterations to converge to a mechanical equilibrium. The Newton
iterations are safeguarded by a line search similar to one used in
optimization. Our computational results indicate that the algorithm is up to 70
times faster than a straightforward Newton continuation procedure and is also
more robust (i.e., able to tolerate much larger deformations). For a few
extremely large deformations, the deformed mesh could only be computed through
the use of an expensive Newton continuation method while using a tight
convergence tolerance and taking very small steps.Comment: Revision of earlier version of paper. Submitted for publication in
Engineering with Computers on 9 September 2010. Accepted for publication on
20 May 2011. Published online 11 June 2011. The final publication is
available at http://www.springerlink.co
Mechanical behavior and failure phenomenon of an in situ-toughened silicon nitride
The Weibull modulus, fracture toughness and crack growth resistance of an in-situ toughened, silicon nitride material used to manufacture a turbine combustor were determined from room temperature to 1371 C. The material exhibited an elongated grain structure that resulted in improved fracture toughness, nonlinear crack growth resistance, and good elevated temperature strength. However, low temperature strength was limited by grains of excessive length (30 to 100 microns). These excessively long grains were surrounded by regions rich in sintering additives
Analysis of plate glass columns: The influence of fixing and the coupling parameter
The design methods of the load bearing glass columns developed extremely in the last years. Numerous glass researchers have been trying to optimize the glass structures in terms of cost-effectiveness and safety. The authors carried out several laboratory experiments to analyze the key factors of the glass column design. Factors are investigated in the present article for example the influence of the fixing at the end of the glass columns, which essentially modifies the load bearing capacity of structures. The efficiency of the gluing of the interlayer foil (the coupling parameter) was analyzed based on the individual laboratory experiments
A comparative study of high-field diamagnetic fluctuations in deoxygenated YBa2Cu3O(7-x) and polycrystalline (Bi-Pb)2Sr2Ca3O(10)
We studied three single crystals of YBa2Cu3O{7-x} with Tc= 62.5, 52, and 41
K, and a textured specimen of (Bi-Pb)2Sr2Ca2Cu3O10 with Tc=108 K, for H//c
axis. The reversible data were interpreted in terms of 2D lowest-Landau-level
fluctuation theory. The data were fit well by the 2D LLL expression for
magnetization obtained by Tesanovic etal., producing reasonable values of kappa
but larger values of dHc2/dT. Universality was studied by obtaining a
simultaneous scaling of Y123 data and Bi2223. An expression for the 2D x-axis
LLL scaling factor used to obtain the simultaneous scaling was extracted from
theory, and compared with the experimental values. The comparison between the
values of the x-axis produced a deviation of 40% which suggests that the
hypothesis of universality of the 2D-LLL fluctuations is not supported by the
studied samples. We finaly observe that Y123 magnetization data for
temperatures above obbey a universal scaling obtained for the diamagnetic
fluctuation magnetization from a theory considering non-local field effects.
The same scaling was not obbeyed by the corresponding magnetization calculated
from the two-dimensional lowest-Landau-level theory.Comment: 7 pages 5 figures, accept in Journ. Low Temp. Phy
- …