1,460 research outputs found
ELEMENTOS PRÉ-MOLDADOS UTILIZADOS EM SILOS PRISMÁTICOS, MODULARES DE CONCRETO ARMADO
This research work was developed to provide technical information for designing multicells reinforced concrete prefabricated silos, in square form and 60 tons to 15 tons corn capacity per cell, aiming small and medium agricultural producers. Theoretical and experimental analyses were conducted that the two coupled by appluing a model of element to evaluate the strutural behavior of a real scale separated elements and coupled elementand coupled element which form the square wall of the modular silo. From the experimental analysis it was concluded that the two coupled element model presented a satisfactory behavior where toughest spot. The stress values obtained from the RAVENETS method and from the biarticulable beam theory were lower than the values experimentally obtained. The measured displacement exhibited similar behavior, however greater than the values calculated by applying the maximum inflection and the half shaft inflection method.Este trabalho foi desenvolvido com o objetivo de fornecer subsídios técnicos para projetos de silos multicelulares em concreto armado, pré-moldados, de forma quadrada, com capacidade de 60t ou 15t de milho por célula para atender a pequenos e médios produtores. Foram feitas análises teóricas e experimentais em um modelo de elemento a fim de se avaliar o comportamento estrutural do elemento isolado e encaixado, em escala natural, que formam as paredes de silos prismáticos, modulares. Com base nas análises experimentais realizadas, concluiu-se que o modelo de encaixe utilizado entre dois elementos (tipo machofêmea) comportou-se de maneira positiva, conferindo maior rigidez à região entre os elementos. As tensões calculadas pelo método simplificado RAVENET e teoria de vigas bi-articuladas subestimaram as tensões experimentais. Os deslocamentos medidos apresentaram comportamento similar, porem superiores aos deslocamentos calculados pela flecha máxima e flecha no meio do vão
Solo-cimento e solo-vinhaça no revestimento de canais de irrigação para transporte de vinhaça : adequação fisica e parametros hidraulico
Orientador : Wesley Jorge FreireDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia AgricolaMestradoConstruções Rurais e AmbienciaMestre em Engenharia Agrícol
Produtividade no ciclo de vida e diferenças de gênero na pesquisa acadêmica: evidências de uma universidade pública brasileira
Personal attributes and behavioral factors are key factors in determining researchers’ scientific productivity. Investigating what determines the academic productivity among university researchers is the purpose of this study, which uses a sample of microdata from professors at a State university in Brazil (Federal University of Juiz de Fora) for the period 1999-2013. The main results show that age and academic productivity have an inverted-U-shaped relationship, revealing that experience enhances academic production. Regarding gender differences, we found that women generally have lower average productivity than men. However, at the end of their careers, women are subject to greater leverage effects in productivity and therefore achieve productive parity with men, especially during their production peaks.Atributos pessoais e fatores comportamentais são fatores-chave na determinação da produtividade científica dos pesquisadores. Investigar o que determina a produtividade acadêmica entre pesquisadores universitários é o objetivo deste estudo, que utiliza uma amostra de microdados de professores de uma universidade estadual brasileira (Universidade Federal de Juiz de Fora) para o período 1999-2013. Os principais resultados mostram que a idade e a produtividade acadêmica apresentam uma relação em forma de U invertido, revelando que a experiência potencializa a produção acadêmica. Em relação às diferenças de gênero, descobrimos que as mulheres geralmente têm produtividade média menor do que os homens. No entanto, ao final da carreira, as mulheres estão sujeitas a maiores efeitos de alavancagem na produtividade e, portanto, alcançam paridade produtiva com os homens, principalmente nos picos de produção
ECONOMIC VIABILITY FOR LETTUCE PRODUCTION ON HIDROPONIC SYSTEM AT COLOMBO, METROPOLITAN REGION OF CURITIBA, PR
Hydroponic production guarantees a parallel market to that for conventionally-produced vegetables, because consumers presume that hydroponic products are of higher quality and more beneficial to health than conventionally-produced products. The main objective of this work was to show the viability of hydroponic cultivation in the production of curly lettuce and to demonstrate to producers the clear advantages of hydroponic production from a cost-benefit perspective, especially when compared to the current conventional production practices used in Colombo, one of the major vegetable producing regions in the greater metropolitan area of Curitiba, the capital of the State of Paraná, Brasil. The cultivation was done under real cultivation conditions, on the Chácara Acqua Vita. Five greenhouses were used, giving a monthly production of 3,600 heads of lettuce, with a sales price of R 0,60 a unidade. Foram estudadas as seguintes variáveis: total de custos (custo fixo + variável); produção total/estufa/mês; receita total; lucro/estufa/mês; preço obtido por cabeça de alface vendida; custo por cabeça de alface produzida; lucro por cabeça de alface produzida; lucro para cinco estufas de produção/mês; remuneração do empresário; total de benefícios/mês; total de investimentos; lucro anual para cinco estufas; e pagamento do investimento. Observou-se maior taxa de custo voltado para o transporte, aquisição e montagem das estufas sendo, porém, esses dois pontos os manipuláveis com a finalidade de diminuir os custos e aumentar o lucro final. Mesmo considerando os altos custos de produção, evidenciou-se que cerca de 50 % do valor recebido pelo agricultor é definido como lucro
Resenha do Livro: Perícia Contábil. Müller, A. N., Timi, S. R. R., & Heimoski, V. T. M. (2017). São Paulo, SP: Saraiva, 224 páginas, ISBN: 978-85-472-1977-2.
A presente resenha tem o objetivo de apresentar uma síntese das principais ideias e percepções expostas no livro de Aderbal Nicolas Müller, Sônia Regina Ribas Timi e Vanya Trevisan Marcon Heimoski, lançado no ano de 2017 pela editora Saraiva
An AFLP marker linked to the Pm-1 gene that confers resistance to Podosphaera xanthii race 1 in Cucumis melo
Brazil produced 330,000 metric tons of melons in 2005, principally in the Northeast region where one of the most important melon pathogens is the powdery mildew fungus Podosphaera xanthii. The disease is controlled mainly by incorporating single dominant resistance genes into commercial hybrids. We report on linkage analysis of the Pm-1 resistance gene, introgressed from the AF125Pm-1 Cantalupensis Charentais-type breeding line into the yellow-fleshed melon (Group Inodorus) breeding line AF426-S by backcrossing to produce the resistant line AF426-R, and the amplified fragment length polymorphism (AFLP) marker M75/H35_155 reported to be polymorphic between AF426-S and AF426-R. Segregation analysis of M75/H35_155 using a backcross population of 143 plants derived from [AF426-R x AF426-S] x AF426-S and screened for resistance to P. xanthii race 1 produced a recombination frequency of 4.9%, indicating close linkage between M75/H35_155 and Pm-1. Using the same segregating population, the M75/H35_155 marker had previously been reported to be distantly linked to Prv¹, a gene conferring resistance to papaya ringspot virus-type W. Since M75/H35_155 is linked to Prv¹ at a distance of 40.9 cM it is possible that Pm-1 and Prv¹ are also linked.(FAPESP) São Paulo Research Foundatio
- …