Design of superconducting MRI surface coil by using method of moment

A method of moment with an enhanced model to design high-temperature superconductor (HTS) RF surface coils for magnetic resonant image (MRI) is presented. The resonant frequency and quality factor (Q) of HTS RF spiral coils are simulated using this method. The agreements of resonant frequencies and Qs between the simulation and measurement are excellent with differences less than 1% and 3%, respectively. The 0.2-μ m-thick YBaCuO (YBCO) thin films are deposited onto single side of 0.508-mm-thick LaAlO 3 (LAO) and sapphire substrate and patterned into a spiral shape. To accurately analyze the resonant frequency and Q of a coil, an enhanced two-fluid model is employed. HTS RF coils with diameter of 65 mm for 0.2T and 1.5T MRI systems are designed and fabricated with the measured Q of 19 K and 23 K, respectively. In addition, the shift of resonant frequency due to the mutual coupling between two HTS spiral coils is predicted by this method, which is important for design of HTS coil arrays in an MRI system.published_or_final_versio

Structural analysis and corrosion studies on an ISO 5832-9 biomedical alloy with TiO2 sol–gel layers

The aim of this study was to demonstrate the relationship between the structural and corrosion properties of an ISO 5832-9 biomedical alloy modified with titanium dioxide (TiO2) layers. These layers were obtained via the sol–gel method by acid-catalyzed hydrolysis of titanium isopropoxide in isopropanol solution. To obtain TiO2 layers with different structural properties, the coated samples were annealed at temperatures of 200, 300, 400, 450, 500, 600 and 800 C for 2 h. For all the prepared samples, accelerated corrosion measurements were performed in Tyrode’s physiological solution using electrochemical methods. The most important corrosion parameters were determined: corrosion potential, polarization resistance, corrosion rate, breakdown and repassivation potentials. Corrosion damage was analyzed using scanning electron microscopy. Structural analysis was carried out for selected TiO2 coatings annealed at 200, 400, 600 and 800 C. In addition, the morphology, chemical composition, crystallinity, thickness and density of the deposited TiO2 layers were determined using suitable electron and X-ray measurement methods. It was shown that the structure and character of interactions between substrate and deposited TiO2 layers depended on annealing temperature. All the obtained TiO2 coatings exhibit anticorrosion properties, but these properties are related to the crystalline structure and character of substrate–layer interaction. From the point of view of corrosion, the best TiO2 sol–gel coatings for stainless steel intended for biomedical applications seem to be those obtained at 400 C.This study was supported by Grant No. N N507 501339 of the National Science Centre. The authors wish to express their thanks to J. Borowski (MEDGAL, Poland) for the Rex 734 alloy

Thermal Assisted Oxygen Annealing for High Efficiency Planar CH3NH3PbI3 Perovskite Solar Cells

published_or_final_versio

Heterogeneous electrocatalytic reduction of maleic acid on nanocrystalline TiO2 film modified Ti electrode

The precursor Ti(OEt)(4) was prepared by anodic dissolution of metallic titanium in absolute ethanol and direct hydrolysis to prepare nanocrystalline TiO2 film on titanium electrode (Ti/nano-TiO2) by a sol-gel process. SEM and XRD were used to characterize the structure of nanocrystalline TiO2 film (anatase, 25 nm). Redox behavior and electrocatalytic activities of the Ti/nano-TiO2 electrode were investigated by cyclic voltammetry (CV) and cyclic osteryoung square wave voltammetry (COV) and bulk electrolysis. The results indicate that there are two pairs of well-defined redox peaks for Ti/nano-TiO2 film electrode in 1 mol/L H2SO4 with E-1/2(r) of -0.53 V and -0.92 V (vs. SCE) at 0.05 V (.) s(-1) in correspondence with TiO2/Ti2O3 and TiO2/Ti(OH)(3) reversible electrode process and the heterogeneous electrocatalytic reduction activities of TiO2/Ti2O3 redox in the electrode for maleic acid. It is found that the indirect electroreduction of maleic acid to butane diacid was achieved by Ti-IV/Ti-III redox system on the nanocrystalline TiO2 film surface, the electrode reaction mechanism is the called catalytic (EC') mechanism

A Piezoelectric Immunosensor Using Hybrid Self-Assembled Monolayers for Detection of Schistosoma japonicum

BACKGROUND: The parasite Schistosoma japonicum causes schistosomiasis disease, which threatens human life and hampers economic and social development in some Asian countries. An important lesson learned from efforts to reduce the occurrence of schistosomiasis is that the diagnostic approach must be altered as further progress is made towards the control and ultimate elimination of the disease. METHODOLOGY/PRINCIPAL FINDINGS: Using mixed self-assembled monolayer membrane (mixed SAM) technology, a mixture of mercaptopropionic acid (MPA) and mercaptoethanol (ME) was self-assembled on the surface of quartz crystals by gold-sulphur-bonds. Soluble egg antigens (SEA) of S. japonicum were then cross-linked to the quartz crystal using a special coupling agent. As compared with the traditional single self-assembled monolayer immobilization method, S. japonicum antigen (SjAg) immobilization using mixed self-assembled monolayers exhibits much greater immunoreactivity. Under optimal experimental conditions, the detection range is 1:1500 to 1:60 (infected rabbit serum dilution ratios). We measured several infected rabbit serum samples with varying S. japonicum antibody (SjAb) concentrations using both immunosensor and ELISA techniques and then produced a correlation analysis. The correlation coefficients reached 0.973. CONCLUSIONS/SIGNIFICANCE: We have developed a new, simple, sensitive, and reusable piezoelectric immunosensor that directly detects SjAb in the serum. This method may represent an alternative to the current diagnostic methods for S. japonicum infection in the clinical laboratory or for analysis outside the laboratory

Epidemiology of anti-tuberculosis drug resistance in a chinese population: current situation and challenges ahead

<p>Abstract</p> <p>Background</p> <p>Drug resistance has been a cause of concern for tuberculosis (TB) control in both developed and developing countries. Careful monitoring of the patterns and trends of drug resistance should remain a priority.</p> <p>Methods</p> <p>Strains were collected from 1824 diagnosed sputum smear positive pulmonary TB patients in Jiangsu province of China and then tested for drug susceptibility against rifampicin, isoniazid, ethambutol and streptomycin. The prevalence and patterns of drug resistance in mycobacterium tuberculosis (MTB) isolates were investigated. Multiple logistic regression analysis was performed to identify the risk factors for multidrug resistant (MDR) bacterial infection. The strength of association was estimated by odds ratio (OR) and 95% confidence interval (95% CI).</p> <p>Results</p> <p>The drug susceptibility tests showed that 1077(59.05%) MTB strains were sensitive to all the four antibiotics and the other 747(40.95%) strains were resistant to at least one drug. The proportions of mono-drug resistance were 28.73% for isoniazid, 19.41% for rifampicin, 29.33% for streptomycin, and 13.98% for ethambutol, respectively. The prevalence of MDR-TB was 16.61%, which was significantly different between new cases (7.63%) and those with previous treatment history (33.07%). Geographical variation of drug resistance was observed, where the proportion of MDR-TB among new cases was higher in the central (9.50%) or north part (9.57%) than that in the south area (4.91%) of Jiangsu province. The age of patients was significantly associated with the risk of drug resistance (P < 0.001) and the adjusted OR (95% CI) was 1.88(1.26-2.81) for patients aged 35-44 years when compared with those 65 years or older. Patients with previous treatment history had a more than 5-fold increased risk of MDR-TB (adjusted OR: 6.14, 95% CI: 4.61-8.17), compared with those previously not having been treated.</p> <p>Conclusions</p> <p>The high prevalence of drug resistance has been a major challenge for TB control. Prevention and control of drug-resistant TB should be emphasized by the revised DOTS (direct observed therapy, short course) program through prompt case detection, routine and quality-assured drug susceptibility test for patients at high risk of resistance, programmatic treatment with both first and second-line medicines, and systematic treatment observation, with priority for high MDR-TB settings.</p

Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

The decay channel $\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p})$ is studied using a sample of $1.06\times 10^8$ $\psi^\prime$ events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the $p\bar{p}$ invariant mass spectrum. The enhancement can be fit with an $S$-wave Breit-Wigner resonance function with a resulting peak mass of $M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2$ and a narrow width that is $\Gamma<38 {\rm MeV/}c^2$ at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

Erratum to: Study protocol: differential effects of diet and physical activity based interventions in pregnancy on maternal and fetal outcomes: individual patient data (IPD) meta-analysis and health economic evaluation.

Erratum to: Study protocol: differential effects of diet and physical activity based interventions in pregnancy on maternal and fetal outcomes: individual patient data (IPD) meta-analysis and health economic evaluatio