A technique for correcting ERTS data for solar and atmospheric effects

The author has identified the following significant results. Based on processing ERTS CCTs and ground truth measurements collected on Michigan test site for January through June 1973 the following results are reported: (1) atmospheric transmittance varies from: 70 to 85% in band 4, 77 to 90% in band 5, 80 to 94% in band 6, and 84 to 97% in band 7 for one air mass; (2) a simple technique was established to determine atmospheric scattering seen by ERTS-1 from ground-based measurements of sky radiance. For March this scattering was found to be equivalent to that produced by a target having a reflectance of 11% in band 4, 5% in band 5, 3% in band 6, and 1% in band 7; (3) computer ability to classify targets under various atmospheric conditions was determined. Classification accuracy on some targets (i.e. bare soil, tended grass, etc.) hold up even under the most severe atmospheres encountered, while performance on other targets (trees, urban, rangeland, etc.) degrades rapidly when atmospheric conditions change by the smallest amount

Prediction of the capacitance lineshape in two-channel quantum dots

We propose a set-up to realize two-channel Kondo physics using quantum dots. We discuss how the charge fluctuations on a small dot can be accessed by using a system of two single electron transistors arranged in parallel. We derive a microscopic Hamiltonian description of the set-up that allows us to make connection with the two-channel Anderson model (of extended use in the context of heavy-Fermion systems) and in turn make detailed predictions for the differential capacitance of the dot. We find that its lineshape, which we determined precisely, shows a robust behavior that should be experimentally verifiable.Comment: 4 pages, 3 figure

Large-amplitude chirped coherent phonons in tellurium mediated by ultrafast photoexcited carrier diffusion

We report femtosecond time-resolved reflectivity measurements of coherent phonons in tellurium performed over a wide range of temperatures (3K to 296K) and pump laser intensities. A totally symmetric A$_{1}$ coherent phonon at 3.6 THz responsible for the oscillations in the reflectivity data is observed to be strongly positively chirped (i.e, phonon time period decreases at longer pump-probe delay times) with increasing photoexcited carrier density, more so at lower temperatures. We show for the first time that the temperature dependence of the coherent phonon frequency is anomalous (i.e, increasing with increasing temperature) at high photoexcited carrier density due to electron-phonon interaction. At the highest photoexcited carrier density of $\sim$ 1.4 $\times$ 10$^{21}$cm$^{-3}$ and the sample temperature of 3K, the lattice displacement of the coherent phonon mode is estimated to be as high as $\sim$ 0.24 \AA. Numerical simulations based on coupled effects of optical absorption and carrier diffusion reveal that the diffusion of carriers dominates the non-oscillatory electronic part of the time-resolved reflectivity. Finally, using the pump-probe experiments at low carrier density of 6 $\times$ 10$^{18}$ cm$^{-3}$, we separate the phonon anharmonicity to obtain the electron-phonon coupling contribution to the phonon frequency and linewidth.Comment: 22 pages, 6 figures, submitted to PR

Evaluation of trigger tool method for adverse drug reaction reporting by nursing staff at a tertiary care teaching hospital

Background: To sensitize nurses about Trigger Tool Method (TTM) and to evaluate the impact of TTM on adverse drug event (ADE) reporting by nurses at a tertiary care teaching hospital in India.Methods: This was prospective, interventional, single center study conducted among nursing health professionals of Civil Hospital Ahmedabad (CHA) posted in Medicine Department. They were sensitized about ADE reporting, pharmacovigilance, methods of ADRs reporting and details about TTM. Also, a list of 17 triggers was prepared by the investigator and given to nurses. They were educated to report ADEs using TTM. At the initiation and end of study, questionnaires were given to evaluate knowledge, attitude and practice of ADR reporting among participant nurses. All triggers and ADEs reported were analyzed in terms of association between them, effectiveness of trigger in detecting an ADR and in terms of Positive Predictive Value (PPV). Reported ADRs were also assessed for causality, severity and preventability.Results: A total 758 patients were admitted during the study period in the respective medicine department. List of 17 triggers consists of 9 drug triggers (DT), 1 laboratory trigger (LT) and 7 patient triggers (PT). Of these 17 triggers, 14 triggers were identified by nurses. These 14 triggers were noticed 130 times. These included DT (100 times), LT (0 times) and PT (30 times). Of the various triggers observed, 7 DT and 4 PT were related to ADRs. Hence, 11 triggers (64.70%) were positive (related to ADRs), out of 17 total triggers under evaluation. 21 ADRs were observed using TTM by nurses.Conclusions: The TTM helps to detect and report ADRs by nurses. Educational interventions about TTM help in better detection and reporting of ADRs

Domination Integrity of Some Path Related Graphs

The stability of a communication network is one of the important parameters for network designers and users. A communication network can be considered to be highly vulnerable if the destruction of a few elements cause large damage and only few members are able to communicate. In a communication network several vulnerability measures like binding number, toughness, scattering number, integrity, tenacity, edge tenacity and rupture degree are used to determine the resistance of network to the disruption after the failure of certain nodes (vertices) or communication links (edges). Domination theory also provides a model to measure the vulnerability of a graph network. The domination integrity of a simple connected graph is one such measure. Here we determine the domination integrity of square graph of path as well as the graphs obtained by composition (lexicographic product) of two paths

Comparative analysis and implementation of structured edge active contour

This paper proposes modified chanvese model which can be implemented on image for segmentation. The structure of paper is based on Linear structure tensor (LST) as input to the variant model. Structure tensor is a matrix illustration of partial derivative information. In the proposed model, the original image is considered as information channel for computing structure tensor. Difference of Gaussian (DOG) is featuring improvement in which we can get less blurred image than original image.In this paper LST is modified by adding intensity information to enhance orientation information. Finally Active Contour Model (ACM) is used to segment the images. The proposed algorithm is tested on various images and also on some images which have intensity inhomogeneity and results are shown. Also, the results with other algorithms like chanvese, Bhattacharya, Gabor based chanvese and Novel structure tensor based model are compared.It is verified that accuracy of proposed model is the best. The biggest advantage of proposed model is clear edge enhancement

Participatory Ranking of Fodders in the Western Hills of Nepal

Fodder is an important source of feed of the ruminants in Nepal. In the mid hills of Nepal, farmers generally practice integrated farming system that combines crop cultivation with livestock husbandry and agroforestry. Tree fodders are good sources of protein during the forage and green grass scarcity periods especially in dry season. Local communities possess indigenous knowledge for the selection of grasses and tree fodders at different seasons in mid hills of western Nepal. A study was conducted on the perception of farmers with respect to selection of fodder species in eight clusters in Kaski and Lumjung districts that range 900-2000 meter above sea level and receive average precipitation of 2000- 4500mm per annum. During the fodder preference ranking, farmers prepared the inventory of fodders found around the villages and nearby forests and selected top ten most important fodders in terms of their availability, palatability, fodder yield, milk yield and milk fat yield. In total, 23 top ranking fodders species were selected from the eight clusters. These fodder species were also ranked using pairwise ranking and weighted scoring methods and ranking was done on the basis of merit numbers obtained from weighted scores. The analysis revealed Artocarpus lakoocha as best tree fodder followed by Ficus semicordata, Thysanolena maxima and Ficus calvata. Similarly, the calendar of fodders trees for lopping season and the best feeding time was prepared on the basis of farmers\u27 local knowledge. This study suggests strategies for promotion of locally preferred tree fodder species and supplementing tree fodder with feed in different seasons depending on their availability and local preferences