Tackling ageing continence through theory, tools & technology (TACT3)

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2012 Common Ground.After dementia, nothing is more feared by older people than the loss of continence. It is often the reason many people enter care facilities and can contribute to the breakdown of caring relationships. This paper reports on a three-year research project funded by the UK New Dynamics of Aging programme, which has explored three key issues in the predicament of maintaining continence from the “user’s” perspective. Firstly, understanding how continence services operated by the UK National Health Service can be improved to offer cost effective benefits that encourage people to report this sometimes embarrassing condition with confidence. Secondly, working directly with the US Simon Foundation, the project has developed user-requested, assistive devices that target the most embarrassing aspects of the condition, namely issues of personal odor control and urine leakage from continence pads. Lastly, understanding the challenges of managing continence in daily living outside of the home, with particular reference to accessing publicly accessible toilet facilities. The paper will highlight the research that has provided the basis for innovative design solutions.ESRC, EPSRC, BBSRC, MRC, and AHRC

ABORDAGEM ESTÉTICA EM DENTES COM AMELOGENESE IMPERFEITA – RELATO DE CASO

Introdução: Paciente NGA, 18 anos, sexo feminino, compareceu a clinica odontológica da UMESP com a queixa principal de “dentes muito amarelos” (sic). Anamnese: A paciente apresentava boas condições sistêmicas e no exame clinico foi observada a presença de dentes hígidos diagnosticados com amelogênese imperfeita. Procedimentos clínicos

Aspects of structural health and condition monitoring of offshore wind turbines

Wind power has expanded significantly over the past years, although reliability of wind turbine systems, especially of offshore wind turbines, has been many times unsatisfactory in the past. Wind turbine failures are equivalent to crucial financial losses. Therefore, creating and applying strategies that improve the reliability of their components is important for a successful implementation of such systems. Structural health monitoring (SHM) addresses these problems through the monitoring of parameters indicative of the state of the structure examined. Condition monitoring (CM), on the other hand, can be seen as a specialized area of the SHM community that aims at damage detection of, particularly, rotating machinery. The paper is divided into two parts: in the first part, advanced signal processing and machine learning methods are discussed for SHM and CM on wind turbine gearbox and blade damage detection examples. In the second part, an initial exploration of supervisor control and data acquisition systems data of an offshore wind farm is presented, and data-driven approaches are proposed for detecting abnormal behaviour of wind turbines. It is shown that the advanced signal processing methods discussed are effective and that it is important to adopt these SHM strategies in the wind energy sector

Understanding why primary care doctors leave direct patient care: a systematic review of qualitative research

This is the final version. Available on open access from BMJ Publishing Group via the DOI in this recordData availability statement: All data relevant to the study are included in the article or uploaded as supplementary information. No additional data available.Background UK general practitioners (GPs) are leaving direct patient care in significant numbers. We undertook a systematic review of qualitative research to identify factors affecting GPs’ leaving behaviour in the workforce as part of a wider mixed methods study (ReGROUP). Objective To identify factors that affect GPs’ decisions to leave direct patient care. Methods Qualitative interview-based studies were identified and their quality was assessed. A thematic analysis was performed and an explanatory model was constructed providing an overview of factors affecting UK GPs. Non-UK studies were considered separately. Results Six UK interview-based studies and one Australian interview-based study were identified. Three central dynamics that are key to understanding UK GP leaving behaviour were identified: factors associated with low job satisfaction, high job satisfaction and those linked to the doctor–patient relationship. The importance of contextual influence on job satisfaction emerged. GPs with high job satisfaction described feeling supported by good practice relationships, while GPs with poor job satisfaction described feeling overworked and unsupported with negatively impacted doctor–patient relationships. Conclusions Many GPs report that job satisfaction directly relates to the quality of the doctor–patient relationship. Combined with changing relationships with patients and interfaces with secondary care, and the gradual sense of loss of autonomy within the workplace, many GPs report a reduction in job satisfaction. Once job satisfaction has become negatively impacted, the combined pressure of increased patient demand and workload, together with other stress factors, has left many feeling unsupported and vulnerable to burn-out and ill health, and ultimately to the decision to leave general practice

Building block libraries and structural considerations in the self-assembly of polyoxometalate and polyoxothiometalate systems

Inorganic metal-oxide clusters form a class of compounds that are unique in their topological and electronic versatility and are becoming increasingly more important in a variety of applications. Namely, Polyoxometalates (POMs) have shown an unmatched range of physical properties and the ability to form structures that can bridge several length scales. The formation of these molecular clusters is often ambiguous and is governed by self-assembly processes that limit our ability to rationally design such molecules. However, recent years have shown that by considering new building block principles the design and discovery of novel complex clusters is aiding our understanding of this process. Now with current progress in thiometalate chemistry, specifically polyoxothiometalates (POTM), the field of inorganic molecular clusters has further diversified allowing for the targeted development of molecules with specific functionality. This chapter discusses the main differences between POM and POTM systems and how this affects synthetic methodologies and reactivities. We will illustrate how careful structural considerations can lead to the generation of novel building blocks and further deepen our understanding of complex systems

DNA topoisomerases participate in fragility of the oncogene RET

Fragile site breakage was previously shown to result in rearrangement of the RET oncogene, resembling the rearrangements found in thyroid cancer. Common fragile sites are specific regions of the genome with a high susceptibility to DNA breakage under conditions that partially inhibit DNA replication, and often coincide with genes deleted, amplified, or rearranged in cancer. While a substantial amount of work has been performed investigating DNA repair and cell cycle checkpoint proteins vital for maintaining stability at fragile sites, little is known about the initial events leading to DNA breakage at these sites. The purpose of this study was to investigate these initial events through the detection of aphidicolin (APH)-induced DNA breakage within the RET oncogene, in which 144 APHinduced DNA breakpoints were mapped on the nucleotide level in human thyroid cells within intron 11 of RET, the breakpoint cluster region found in patients. These breakpoints were located at or near DNA topoisomerase I and/or II predicted cleavage sites, as well as at DNA secondary structural features recognized and preferentially cleaved by DNA topoisomerases I and II. Co-treatment of thyroid cells with APH and the topoisomerase catalytic inhibitors, betulinic acid and merbarone, significantly decreased APH-induced fragile site breakage within RET intron 11 and within the common fragile site FRA3B. These data demonstrate that DNA topoisomerases I and II are involved in initiating APH-induced common fragile site breakage at RET, and may engage the recognition of DNA secondary structures formed during perturbed DNA replication

Revised Lithostratigraphy of the Sonsela Member (Chinle Formation, Upper Triassic) in the Southern Part of Petrified Forest National Park, Arizona

BACKGROUND: Recent revisions to the Sonsela Member of the Chinle Formation in Petrified Forest National Park have presented a three-part lithostratigraphic model based on unconventional correlations of sandstone beds. As a vertebrate faunal transition is recorded within this stratigraphic interval, these correlations, and the purported existence of a depositional hiatus (the Tr-4 unconformity) at about the same level, must be carefully re-examined. METHODOLOGY/PRINCIPAL FINDINGS: Our investigations demonstrate the neglected necessity of walking out contacts and mapping when constructing lithostratigraphic models, and providing UTM coordinates and labeled photographs for all measured sections. We correct correlation errors within the Sonsela Member, demonstrate that there are multiple Flattops One sandstones, all of which are higher than the traditional Sonsela sandstone bed, that the Sonsela sandstone bed and Rainbow Forest Bed are equivalent, that the Rainbow Forest Bed is higher than the sandstones at the base of Blue Mesa and Agate Mesa, that strata formerly assigned to the Jim Camp Wash beds occur at two stratigraphic levels, and that there are multiple persistent silcrete horizons within the Sonsela Member. CONCLUSIONS/SIGNIFICANCE: We present a revised five-part model for the Sonsela Member. The units from lowest to highest are: the Camp Butte beds, Lot's Wife beds, Jasper Forest bed (the Sonsela sandstone)/Rainbow Forest Bed, Jim Camp Wash beds, and Martha's Butte beds (including the Flattops One sandstones). Although there are numerous degradational/aggradational cycles within the Chinle Formation, a single unconformable horizon within or at the base of the Sonsela Member that can be traced across the entire western United States (the "Tr-4 unconformity") probably does not exist. The shift from relatively humid and poorly-drained to arid and well-drained climatic conditions began during deposition of the Sonsela Member (low in the Jim Camp Wash beds), well after the Carnian-Norian transition

Enzyme‐assisted aqueous extraction of Kalahari melon seed oil: optimization using response surface methodology

Enzymatic extraction of oil from Kalahari melon seeds was investigated and evaluated by response surface methodology (RSM). Two commercial protease enzyme products were used separately: Neutrase® 0.8 L and Flavourzyme® 1000 L from Novozymes (Bagsvaerd, Denmark). RSM was applied to model and optimize the reaction conditions namely concentration of enzyme (20–50 g kg−1 of seed mass), initial pH of mixture (pH 5–9), incubation temperature (40–60 °C), and incubation time (12–36 h). Well fitting models were successfully established for both enzymes: Neutrase 0.8 L (R 2 = 0.9410) and Flavourzyme 1000 L (R 2 = 0.9574) through multiple linear regressions with backward elimination. Incubation time was the most significant reaction factor on oil yield for both enzymes. The optimal conditions for Neutrase 0.8 L were: an enzyme concentration of 25 g kg−1, an initial pH of 7, a temperature at 58 °C and an incubation time of 31 h with constant shaking at 100 rpm. Centrifuging the mixture at 8,000g for 20 min separated the oil with a recovery of 68.58 ± 3.39%. The optimal conditions for Flavourzyme 1000 L were enzyme concentration of 21 g kg−1, initial pH of 6, temperature at 50 °C and incubation time of 36 h. These optimum conditions yielded a 71.55 ± 1.28% oil recovery