Geographically distributed hybrid testing & collaboration between geotechnical centrifuge and structures laboratories

© 2018, Institute of Engineering Mechanics (IEM). All rights reserved. Distributed Hybrid Testing (DHT) is an experimental technique designed to capitalise on advances in modern networking infrastructure to overcome traditional laboratory capacity limitations. By coupling the heterogeneous test apparatus and computational resources of geographically distributed laboratories, DHT provides the means to take on complex, multi-disciplinary challenges with new forms of communication and collaboration. To introduce the opportunity and practicability afforded by DHT, here an exemplar multi-site test is addressed in which a dedicated fibre network and suite of custom software is used to connect the geotechnical centrifuge at the University of Cambridge with a variety of structural dynamics loading apparatus at the University of Oxford and the University of Bristol. While centrifuge time-scaling prevents real-time rates of loading in this test, such experiments may be used to gain valuable insights into physical phenomena, test procedure and accuracy. These and other related experiments have led to the development of the real-time DHT technique and the creation of a flexible framework that aims to facilitate future distributed tests within the UK and beyond. As a further example, a real-time DHT experiment between structural labs using this framework for testing across the Internet is also presented

Volume I. Introduction to DUNE

The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay—these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. This TDR is intended to justify the technical choices for the far detector that flow down from the high-level physics goals through requirements at all levels of the Project. Volume I contains an executive summary that introduces the DUNE science program, the far detector and the strategy for its modular designs, and the organization and management of the Project. The remainder of Volume I provides more detail on the science program that drives the choice of detector technologies and on the technologies themselves. It also introduces the designs for the DUNE near detector and the DUNE computing model, for which DUNE is planning design reports. Volume II of this TDR describes DUNE\u27s physics program in detail. Volume III describes the technical coordination required for the far detector design, construction, installation, and integration, and its organizational structure. Volume IV describes the single-phase far detector technology. A planned Volume V will describe the dual-phase technology

Scintillator ageing of the T2K near detectors from 2010 to 2021

The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9–2.2% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator. The long component of the attenuation length of the wavelength shifting fibres was observed to degrade by 1.3–5.4% per year, while the short component of the attenuation length did not show any conclusive degradation

Deep Underground Neutrino Experiment (DUNE), far detector technical design report, volume III: DUNE far detector technical coordination

The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay—these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume III of this TDR describes how the activities required to design, construct, fabricate, install, and commission the DUNE far detector modules are organized and managed. This volume details the organizational structures that will carry out and/or oversee the planned far detector activities safely, successfully, on time, and on budget. It presents overviews of the facilities, supporting infrastructure, and detectors for context, and it outlines the project-related functions and methodologies used by the DUNE technical coordination organization, focusing on the areas of integration engineering, technical reviews, quality assurance and control, and safety oversight. Because of its more advanced stage of development, functional examples presented in this volume focus primarily on the single-phase (SP) detector module

Soil deformation during monotonic and seismic pipe uplift in liquefiable soil

Journal of Pipeline Engineering14133-4

Ultra-linear pseudomorphic HEMTs for wireless communications: A simulation study

In this paper, we apply numerical device simulation in the design of pseudomorphic HEMTs with improved linearity and reduced intermodulation products aimed at wireless communications applications. We show that in channel doped GaAs pHEMTs the introduction of a p-doped buffer layer significantly improves the device linearity leading to a 10 dB suppression of 3rd order distortion over a wide bias range with similar gain when compared with a more standard δ-doped GaAs pHEMT device

Evaluating the efficacy of alternative small scale test methodologies in deriving the mechanical properties of additive manufactured materials

With the continuous drive of the aerospace industry to implement additive manufactured (AM) components into the next generation of aero-engines, to benefit from the near net shape and weight saving potential that the technology has to offer, the requirement to understand their mechanical performance is also rising in parallel. This is further complicated by the highly localised and transient micro/macro structures that AM produced parts typically possess, raising a question mark over the suitability of more traditional mechanical test approaches where the bulk properties are heavily influenced by the presence of a single defect. As such, alternative experimental approaches, capable of establishing the properties of smaller more intricate structures and geometrically representative microstructures and cross sections, needs to be considered for process parameter down-selection. This paper will explore the suitability of several alternative mechanical test methodologies in characterising the mechanical behaviour of a nickel based superalloy, Inconel 718 (IN718), produced by laser powder bed fusion (LPBF), and establish which results correlate most favourably to those generated through more conventional means. For the first time, results will be presented from several mechanical test methodologies including small punch, shear punch, hardness, nano-indentation and profilometry based indentation plastometry experiments; a set of mechanical test approaches that have yet to be directly compared and discussed in a single study on an additively manufactured material. Findings will be supported by advanced microscopy in the form of field emission SEM and crystallographic texture maps produced through electron back-scattered diffraction