35 research outputs found
Recommended from our members
Commissioning the Cryogenic System of the First LHC Sector
The LHC machine, composed of eight sectors with superconducting magnets and accelerating cavities requires a complex cryogenic system providing high cooling capacities (18Â kW equivalent at 4.5Â K and 2.4 Â W at 1.8Â K per sector produced in large cold boxes and distributed via 3.3-km cryogenic transfer lines). After individual reception tests of the cryogenic subsystems (cryogen storages, refrigerators, cryogenic transfer lines and distribution boxes) performed since 2000, the commissioning of the cryogenic system of the first LHC sector has been under way since November 2006. After a brief introduction to the LHC cryogenic system and its specificities, the commissioning is reported detailing the preparation phase (pressure and leak tests, circuit conditioning and flushing), the cool-down sequences including the handling of cryogenic fluids, the magnet powering phase and finally the warm-up. Preliminary conclusions on the commissioning of the first LHC sector will be drawn with the review of the critical points already solved or still pending. The last part of the paper reports on the first operational experience of the LHC cryogenic system in the perspective of the commissioning of the remaining LHC sectors and the beam injection test
Optical performance of the JWST MIRI flight model: characterization of the point spread function at high-resolution
The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard
the James Webb Space Telescope (JWST), providing imaging, coronagraphy and
spectroscopy over the 5-28 microns band. To verify the optical performance of
the instrument, extensive tests were performed at CEA on the flight model (FM)
of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the
infrared. This paper reports on the point spread function (PSF) measurements at
5.6 microns, the shortest operating wavelength for imaging. At 5.6 microns the
PSF is not Nyquist-sampled, so we use am original technique that combines a
microscanning measurement strategy with a deconvolution algorithm to obtain an
over-resolved MIRIM PSF. The microscanning consists in a sub-pixel scan of a
point source on the focal plane. A data inversion method is used to reconstruct
PSF images that are over-resolved by a factor of 7 compared to the native
resolution of MIRI. We show that the FWHM of the high-resolution PSFs were
5-10% wider than that obtained with Zemax simulations. The main cause was
identified as an out-of-specification tilt of the M4 mirror. After correction,
two additional test campaigns were carried out, and we show that the shape of
the PSF is conform to expectations. The FWHM of the PSFs are 0.18-0.20 arcsec,
in agreement with simulations. 56.1-59.2% of the total encircled energy
(normalized to a 5 arcsec radius) is contained within the first dark Airy ring,
over the whole field of view. At longer wavelengths (7.7-25.5 microns), this
percentage is 57-68%. MIRIM is thus compliant with the optical quality
requirements. This characterization of the MIRIM PSF, as well as the
deconvolution method presented here, are of particular importance, not only for
the verification of the optical quality and the MIRI calibration, but also for
scientific applications.Comment: 13 pages, submitted to SPIE Proceedings vol. 7731, Space Telescopes
and Instrumentation 2010: Optical, Infrared, and Millimeter Wav
The Mid-Infrared Instrument for the James Webb Space Telescope, V: Predicted Performance of the MIRI Coronagraphs
The imaging channel on the Mid-Infrared Instrument (MIRI) is equipped with
four coronagraphs that provide high contrast imaging capabilities for studying
faint point sources and extended emission that would otherwise be overwhelmed
by a bright point-source in its vicinity. Such bright sources might include
stars that are orbited by exoplanets and circumstellar material, mass-loss
envelopes around post-main-sequence stars, the near-nuclear environments in
active galaxies, and the host galaxies of distant quasars. This paper describes
the coronagraphic observing modes of MIRI, as well as performance estimates
based on measurements of the MIRI flight model during cryo-vacuum testing. A
brief outline of coronagraphic operations is also provided. Finally, simulated
MIRI coronagraphic observations of a few astronomical targets are presented for
illustration
The Mid-Infrared Instrument for the James Webb Space Telescope, III: MIRIM, The MIRI Imager
In this article, we describe the MIRI Imager module (MIRIM), which provides
broad-band imaging in the 5 - 27 microns wavelength range for the James Webb
Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed
view of 74"x113". The remainder of its nominal 113"x113" field is occupied by
the coronagraphs and the low resolution spectrometer. We present the instrument
optical and mechanical design. We show that the test data, as measured during
the test campaigns undertaken at CEA-Saclay, at the Rutherford Appleton
Laboratory, and at the NASA Goddard Space Flight Center, indicate that the
instrument complies with its design requirements and goals. We also discuss the
operational requirements (multiple dithers and exposures) needed for optimal
scientific utilization of the MIRIM.Comment: 29 pages, 9 figure
SPICES: Spectro-Polarimetric Imaging and Characterization of Exoplanetary Systems
SPICES (Spectro-Polarimetric Imaging and Characterization of Exoplanetary
Systems) is a five-year M-class mission proposed to ESA Cosmic Vision. Its
purpose is to image and characterize long-period extrasolar planets and
circumstellar disks in the visible (450 - 900 nm) at a spectral resolution of
about 40 using both spectroscopy and polarimetry. By 2020/22, present and
near-term instruments will have found several tens of planets that SPICES will
be able to observe and study in detail. Equipped with a 1.5 m telescope, SPICES
can preferentially access exoplanets located at several AUs (0.5-10 AU) from
nearby stars (25 pc) with masses ranging from a few Jupiter masses to Super
Earths (2 Earth radii, 10 M) as well as circumstellar
disks as faint as a few times the zodiacal light in the Solar System
The mid-infrared instrument for the James Webb Space Telescope: performance and operation of the Low-Resolution Spectrometer
We describe here the performance and operational concept for the Low Resolution Spectrometer (LRS) of the mid-infrared instrument (MIRI) for the James Webb Space Telescope. The LRS will provide R∼100 slit and slitless spectroscopy from 5 to 12 micron, and its design is optimised for observations of compact sources, such as exoplanet host stars. We provide here an overview of the design of the LRS, and its performance as measured during extensive test campaigns, examining in particular the delivered image quality, dispersion, and resolving power, as well as spectrophotometric performance. The instrument also includes a slitless spectroscopy mode, which is optimally suited for transit spectroscopy of exoplanet atmospheres. We provide an overview of the operational procedures and the differences ahead of the JWST launch in 2018
Super-resolution method using sparse regularization for point-spread function recovery
International audienceIn large-scale spatial surveys, such as the forthcoming ESA Euclid mission, images may be undersampled due to the optical sensors sizes. Therefore, one may consider using a super-resolution (SR) method to recover aliased frequencies, prior to further analysis. This is particularly relevant for point-source images, which provide direct measurements of the instrument point-spread function (PSF). We introduce SParse Recovery of InsTrumental rEsponse (SPRITE), which is an SR algorithm using a sparse analysis prior. We show that such a prior provides significant improvements over existing methods, especially on low signal-to-noise ratio PSFs
Integration and testing of the DESI spectrograph prototype
International audienceThe Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation probe. The KPNO Mayall telescope will deliver light to 5000 fibers feeding ten broadband spectrographs. A consortium of Aix-Marseille University (AMU) and CNRS laboratories (LAM, OHP and CPPM) together with the WINLIGHT Systems company (Pertuis-France) has committed to integrate and validate the performance requirements of the full spectrographs, equipped with their cryostats, shutters and other mechanisms. An AIT plan has been defined and dedicated test equipment has been designed and implemented. This equipment simulates the fiber input illumination from the telescope, and offers a variety of continuum and line sources. Flux levels are adjustable and can illuminate one or several fibers along the test slit. It is fully remotely controlled and interfaced to the Instrument Control System. Specific analysis tools have also been developed to verify and monitor the performance and stability of the spectrographs. All these developments are described in details
First tests of the coronagraphic device of MIRI/JWST
International audienc