1,324 research outputs found
Effect of an electric field on superfluid helium scintillation produced by alpha-particle sources
We report a study of the intensity and time dependence of scintillation
produced by weak alpha particle sources in superfluid helium in the presence of
an electric field (0 - 45 kV/cm) in the temperature range of 0.2 K to 1.1 K at
the saturated vapor pressure. Both the prompt and the delayed components of the
scintillation exhibit a reduction in intensity with the application of an
electric field. The reduction in the intensity of the prompt component is well
approximated by a linear dependence on the electric field strength with a
reduction of 15% at 45 kV/cm. When analyzed using the Kramers theory of
columnar recombination, this electric field dependence leads to the conclusion
that roughly 40% of the scintillation results from species formed from atoms
originally promoted to excited states and 60% from excimers created by
ionization and subsequent recombination with the charges initially having a
cylindrical Gaussian distribution about the alpha track of 60 nm radius. The
intensity of the delayed component of the scintillation has a stronger
dependence on the electric field strength and on temperature. The implications
of these data on the mechanisms affecting scintillation in liquid helium are
discussed.Comment: 17 pages, 23 figure
Drift of scrollwaves in a mathematical model of a heterogeneous human heart left ventricle
Rotating spiral waves of electrical excitation underlie many dangerous cardiac arrhythmias. The heterogeneity of myocardium is one of the factors that affects the dynamics of such waves. In this paper, we present results of our simulations for scroll wave dynamics in a heterogeneous model of the human left ventricle with analytical anatomically based representation of the geometry and anisotropy. We used a set of 18 coupled differential equations developed by ten Tusscher and Panfilov (TP06 model) which describes human ventricular cells based on their measured biophysical properties. We found that apicobasal heterogeneity dramatically changes the scroll wave dynamics. In the homogeneous model, the scroll wave annihilates at the base, but the moderate heterogeneity causes the wave to move to the apex and then continuously rotates around it. The rotation speed increased with the degree of the heterogeneity. However, for large heterogeneity, we observed formation of additional wavebreaks and the onset of complex spatio-temporal patterns. Transmural heterogeneity did not change the dynamics and decreased the lifetime of the scroll wave with an increase in heterogeneity. Results of our numerical experiments show that the apex may be a preferable location of the scroll wave, which may be important for development of clinical interventions. © 2020 by the authors.AAAA-A18-118020590031-8Russian Foundation for Basic Research, RFBR: 18-29-13008Russian Science Foundation, RSF: 14-35-00005Ural Federal University, UrFUP.K., S.P., O.S., and A.V.P. were funded by the Russian Science Foundation (project 14-35-00005). A.V.P., P.K., and O.S. were funded by the Russian Foundation for Basic Research (#18-29-13008). A.V.P. and O.S. were funded by RF Government Act #211 of 16 March 2013 (agreement 02. A03.21.0006). P.K. and O.S. work was carried out within the framework of the IIF UrB RAS theme No. AAAA-A18-118020590031-8. A.V.P. and H.D. were partially funded by BOF Ghent University. Simulations were performed at the supercomputer Uran of Institute of Mathematics and Mechanics (Ekaterinburg, Russia) and at the supercomputer of Ural Federal University (Ekaterinburg, Russia)
Test beam studies of the TRD prototype filled with different gas mixtures based on Xe, Kr, and Ar
Towards the end of LHC Run1, gas leaks were observed in some parts of the
Transition Radiation Tracker (TRT) of ATLAS. Due to these leaks, primary Xenon
based gas mixture was replaced with Argon based mixture in various parts.
Test-beam studies with a dedicated Transition Radiation Detector (TRD)
prototype were carried out in 2015 in order to understand transition radiation
performance with mixtures based on Argon and Krypton. We present and discuss
the results of these test-beam studies with different active gas compositions.Comment: 5 pages,12 figures, The 2nd International Conference on Particle
Physics and Astrophysics (ICPPA-2016); Acknowledgments section correcte
Deformations of the Retaining Structures Upon Deep Excavations in Moscow
Foundation trenches for the buildings having underground floors and vehicular traffic tunnels are excavated in Moscow in congested urban housing environment. A retaining structure is a “slurry wall” made of cast-in-place reinforced concrete), and “soil-mixed-wall”. Retaining structures of trenches are fastened with the help of anchors, metal tie-beams, struts or floor structures. During the monitoring performed at major Moscow construction sites with deep trenches the (NIIOSP) named after Gersevanov created a database on retaining structures deformations
Some results of test beam studies of Transition Radiation Detector prototypes at CERN
Operating conditions and challenging demands of present and future
accelerator experiments result in new requirements on detector systems. There
are many ongoing activities aimed to develop new technologies and to improve
the properties of detectors based on existing technologies. Our work is
dedicated to development of Transition Radiation Detectors (TRD) suitable for
different applications. In this paper results obtained in beam tests at SPS
accelerator at CERN with the TRD prototype based on straw technology are
presented. TRD performance was studied as a function of thickness of the
transition radiation radiator and working gas mixture pressure
The environment effect on operation of in-vessel mirrors for plasma diagnostics in fusion devices
First mirrors will be the plasma facing components of optical diagnostic
systems in ITER. Mirror surfaces will undergo modification caused by erosion
and re-deposition processes [1,2]. As a consequence, the mirror performance may
be changed and may deteriorate [3,4]. In the divertor region it may also be
obscured by deposition [5-7]. The limited access to in-vessel components of
ITER calls for testing the mirror materials in present day devices in order to
gather information on the material damage and degradation of the mirror
performance, i.e. reflectivity. A dedicated experimental programme, First
Mirror Test (FMT), has been initiated at the JET tokamak within the framework
Tritium Retention Studies (TRS).Comment: 12th International Congress on Plasma Physics, 25-29 October 2004,
Nice (France).Submitted by B. Schunke on behalf of V. Voytseny
First test of an enriched CdWO scintillating bolometer for neutrinoless double-beta-decay searches
For the first time, a cadmium tungstate crystal scintillator enriched in
Cd has been succesfully tested as a scintillating bolometer. The
measurement was performed above ground at a temperature of 18 mK. The crystal
mass was 34.5 g and the enrichment level ~82 %. Despite a substantial pile-up
effect due to above-ground operation, the detector demonstrated a high energy
resolution (2-7 keV FWHM in 0.2-2.6 MeV energy range), a powerful
particle identification capability and a high level of internal radiopurity.
These results prove that cadmium tungstate is an extremely promising detector
material for a next-generation neutrinoless double-beta decay bolometric
experiment, like that proposed in the CUPID project (CUORE Upgrade with
Particle IDentification)
Processes at the margins of supraglacial debris cover:Quantifying dirty ice ablation and debris redistribution
Current glacier ablation models have difficulty simulating the high‐melt transition zone between clean and debris‐covered ice. In this zone, thin debris cover is thought to increase ablation compared to clean ice, but often this cover is patchy rather than continuous. There is a need to understand ablation and debris dynamics in this transition zone to improve the accuracy of ablation models and the predictions of future debris cover extent. To quantify the ablation of partially debris‐covered ice (or ‘dirty ice’), a high‐resolution, spatially‐continuous ablation map was created from repeat unmanned aerial systems (UAS) surveys, corrected for glacier flow in a novel way using on‐glacier ablation stakes. Surprisingly, ablation is similar (range ~5 mm w.e. per day) across a wide range of percentage debris covers (~30‐80%) due to the opposing effects of a positive correlation between percentage debris cover and clast size, countered by a negative correlation with albedo. Once debris cover becomes continuous, ablation is significantly reduced (by 61.6% compared to a partial debris cover), and there is some evidence that the cleanest ice (<~15% debris cover) has a lower ablation than dirty ice (by 3.7%). High‐resolution feature tracking of clast movement revealed a strong modal clast velocity where debris was continuous, indicating that debris moves by creep down moraine slopes, in turn promoting debris cover growth at the slope toe. However, not all slope margins gain debris due to the removal of clasts by supraglacial streams. Clast velocities in the dirty ice area were twice as fast than clasts within the continuously debris‐covered area, as clasts moved by sliding off their boulder tables. These new quantitative insights into the interplay between debris cover characteristics and ablation can be used to improve the treatment of dirty ice in ablation models, in turn improving estimates of glacial meltwater production
- …