Creep-Fatigue Crack Growth in Power Plant Components

In components operating at high temperature, the presence of defect, that may derive from manufacturing process or operating under critical conditions, could raise to creep-fatigue crack growth even at low loading conditions. Creep- fatigue experimental tests have been performed on P91 material, at 600 °C according to ASTM E2760-10 standard, with focus on the effects of the initial nominal stress intensity factor range, ranging between 16 and 22 MPa m 0.5, and the hold time, ranging between 0.1 and 10 hours. The results will be presented in the paper, together with their application for residual life prediction of a power plant cracked pipe, as case study

High temperature initiation and propagation of cracks in 12%Cr-steel turbine disks

This work aims to study the crack propagation in 12%Cr steel for turbine disks. Creep Crack Growth (CCG) tests on CT specimens have been performed to define the proper fracture mechanics which describes the initiation of the crack propagation and the crack growth behaviour for the material at high temperature. Results have been used to study the occurrence of crack initiation on a turbine disk at the extreme working temperature and stress level experienced during service, and validate the use of C* integral in correlating creep growth rate on the disk component, in case C* is numerically calculated through FEM analysis or calculated by the use of reference stress concept

Crack Growth Studies in Railway Axles under Corrosion Fatigue: Full-scale Experiments and Model Validation

Abstract Crack initiation and growth in full scale railway axle in A1T mild steel have been studied, under three points rotating bending loading conditions and artificial rainwater as corrosive environment. A surface plastic replication technique has been used along with optical microscopy and Scanning Electron Microscopy to monitor the environment assisted fatigue at various stages.A modified Murtaza and Akid empirical model has been employed to predict the corrosion fatigue crack growth rates and a reasonable agreement has been found between experimental and calculated lifetime

Experimental and simulated displacement in cracked specimen of P91 steel under creep conditions

AbstractThe assessment of crack initiation and propagation under creep conditions is important in the remaining life prediction of pipe components for power generation industry. One of the most successful analytical parameters for describing crack propagation under steady-state creep conditions is the C*-Integral that depends strongly on the material’s creep behavior and the resulting load-line displacement. This study deals with the determination and optimization of a creep model for a P91 grade steel operating at 600 °C. After a good fit provided by the model with uniaxial creep tests was found, the creep behavior of compact type C(T) specimens was modeled to predict creep crack growth (CCG) rates. A modified Cocks and Ashby power law creep controlled cavity growth model was used to compute the creep crack propagation rates. Load-line deflection was found to be strongly dependent on the primary creep strain rate. Lastly, good correlation between the experimental CCG results and the predicted CCG rates from the simulations were found

Ecological notes on an endemic freshwater lamprey, Lampetra zanandreai (Vladykov, 1955)

Lampetra zanandreai (Vladykov, 1955) is a non-parasitic, freshwater lamprey endemic to the ancient Po basin. A few, mostly very dated studies have investigated some aspect of the biology of this lamprey, but surprisingly, despite it being considered a threatened species, information on its ecology is practically absent. Specifically, information about habitat preferences is generic and qualitative. Since most of the life cycle is spent in the fossorial larval stage, which is also the only one in which organisms feed, information about ecological requirements of ammocoetes is essential for any conservation strategy. In this study we provide the first data about physical habitat preferences for lamprey ammocoetes by analyzing their presence within sampled hydromorphological units (HMUs), following the approach of habitat attribute description of the MesoHABSIM (MesoHABitat SImulation Model) methodology. To explore the relationship between lamprey presence and HMU characteristics, a random forest (RF) model was developed and tested using data collected in five stream reaches of the Po basin (NW Italy). The final parsimonious RF model performed well in terms of accuracy (95.2%) and true skill statistic (90.4%), allowing us to identify the most significant mesohabitat attributes for the considered species. Furthermore, in the Ghiandone River, where the highest density and number of individuals were found, a granulometric analysis of the riverbed material was carried out. Results showed that selected strains of sand and fine gravel, with low organic content, are preferred by ammocoetes. To our knowledge, this is the first study exploring the habitat preference of this endangered species, listed in Annex II of the European Habitats Directive

Fly fishing no-kill zones: a possible way to conjugate conservation issues, sustainable sport enhancement and local development in Alpine areas?

The promotion of sustainable tourism and outdoor sports can represent an important way to couple environmental conservation strategies and economic enhancement in marginal and Alpine areas. In this context catch and release fly fishing zones can represent an interesting tool, although no data is available on the effectiveness of these practices on Alpine salmonid population dynamics. Salmonids are the main group of fish in alpine rivers and they are the only actively targeted by anglers. Aim of this work is filling this gap, with a pilot study on two no-kill zones (Po and Pellice rivers, NW Italy). We conducted a temporal and spatial comparison between free-fishing and catch and release management river sections, with a detailed analysis on the Po River site. Our results support the hypothesis that catch and release management allows a numerical increase in wild trout populations. In particular, we detected a massive and rapid increase in younger individuals, possibly linked to a stop on the removal of large-sized reproducers. Protecting trout by the implementation of this practice can at the same time allow the increase of sustainable economic development and sport in marginal areas

Calcium Looping for Thermochemical Storage: Assessment of Intrinsic Reaction Rate and Estimate of Kinetic/Transport Parameters for Synthetic CaO/Mayenite Particles from TGA Data

Mayenite-supported CaO represents an affordable and safetycompliant candidate material for thermochemical storage processes. We here analyze the thermogravimetric analysis (TGA) performance of synthetic CaO/mayenite micrometric powder under carbonatation/calcination looping and develop a model to interpret and analyze the experimental results. In the experimental campaign, calcination is run at 900 degrees C, while the carbonatation temperature is varied between 600 and 800 degrees C. For the carbonatation reaction, a generalized shrinking core model assuming a thermodynamically consistent first-order kinetic and a conversion-dependent diffusivity of CO2 inside the porous CaCO3 layer is validated through TGA carbonatation tests conducted with CO2/N-2 mixtures at different compositions. Interestingly, the kinetic constant of this reaction is found to be relatively insensitive to the temperature in the interval considered. In contrast, diffusion-limited regimes are never found for the calcination reaction so that this phase of the cycle can be predicted based on a single kinetic constant of the heterogeneous reaction. This constant is found to follow the typical Arrhenius-type dependence on temperature. Sizably different kinetic and transport parameters are obtained in the first carbonation performed on virgin CaO/mayenite particles with respect to those associated with subsequent cycles. When different parameters are afforded for the first and following cycles, the shrinking core model proposed closely predicts the TGA data over five CaO/CaCO3 cycles. The results found constitute an essential preliminary piece of information for designing equipment geometry and operating conditions of industrial-scale reactors. In this respect, knowledge of the parameters defining the intrinsic reaction rates and diffusive transport is essential in defining the optimal conversion of the material associated with minimal looping time

Universality and diversity of folding mechanics for three-helix bundle proteins

In this study we evaluate, at full atomic detail, the folding processes of two small helical proteins, the B domain of protein A and the Villin headpiece. Folding kinetics are studied by performing a large number of ab initio Monte Carlo folding simulations using a single transferable all-atom potential. Using these trajectories, we examine the relaxation behavior, secondary structure formation, and transition-state ensembles (TSEs) of the two proteins and compare our results with experimental data and previous computational studies. To obtain a detailed structural information on the folding dynamics viewed as an ensemble process, we perform a clustering analysis procedure based on graph theory. Moreover, rigorous pfold analysis is used to obtain representative samples of the TSEs and a good quantitative agreement between experimental and simulated Fi-values is obtained for protein A. Fi-values for Villin are also obtained and left as predictions to be tested by future experiments. Our analysis shows that two-helix hairpin is a common partially stable structural motif that gets formed prior to entering the TSE in the studied proteins. These results together with our earlier study of Engrailed Homeodomain and recent experimental studies provide a comprehensive, atomic-level picture of folding mechanics of three-helix bundle proteins.Comment: PNAS, in press, revised versio

Spin-orbit torque-driven magnetization switching and thermal effects studied in Ta\CoFeB\MgO nanowires

We demonstrate magnetization switching in out-of-plane magnetized Ta\CoFeB\MgO nanowires by current pulse injection along the nanowires, both with and without a constant and uniform magnetic field collinear to the current direction. We deduce that an effective torque arising from spin-orbit effects in the multilayer drives the switching mechanism. While the generation of a component of the magnetization along the current direction is crucial for the switching to occur, we observe that even without a longitudinal field thermally generated magnetization fluctuations can lead to switching. Analysis using a generalized Néel-Brown model enables key parameters of the thermally induced spin-orbit torques-driven switching process to be estimated, such as the attempt frequency and the effective energy barrier