Using full-scale duckweed ponds as the finish stage for swine waste treatment with a focus on organic matter degradation

Artigo Publicado em: IWA - Water Science & TechnologyThe rapid increase in the number of swine has caused pronounced environmental impacts worldwide, especially on water resources. As an aggregate, smallholdings have an important role in South American pork production, contributing to the net diffusion of pollution. Thus, duckweed ponds have been successfully used for swine waste polishing, mainly for nutrient removal. Few studies have been carried out to assess organic matter degradation in duckweed ponds. Hence, the present study evaluated the efficiency of two full-scale duckweed ponds for organic matter reduction of swine waste on small pig farms. Duckweed ponds, in series, received the effluent after an anaerobic biodigester and storage pond, with a flow rate of 1 m3 day 1. After 1 year of monitoring, an improvement in effluent quality was observed, with a reduction in biochemical oxygen demand (BOD) and total chemical oxygen demand (tCOD), respectively, of 94.8 and 96.7%, operating at a loading rate of approximately 27 kgBOD ha 1 day 1 and 131 kgCOD ha 1 day 1. Algae inhibition due to duckweed coverage was strongly observed in the pond effluent, where chlorophyll a and turbidity remained below 25 μg L 1 and 10 NTU. Using the study conditions described herein, duckweed ponds were shown to be a suitable technology for swine waste treatment, contributing to the environmental sustainability of rural areas

Nutrient recovery from swine waste and protein biomass production using duckweed ponds (Landoltia punctata): Southern Brazil

Artigo publicado em: IWA - Water Sciencie et TechnologyBrazil is one of the most important countries in pork production worldwide, ranking third. This activity has an important role in the national economic scenario. However, the fast growth of this activity has caused major environmental impacts, especially in developing countries. The large amount of nitrogen and phosphorus compounds found in pig manure has caused ecological imbalances, with eutrophication of major river basins in the producing regions. Moreover, much of the pig production in developing countries occurs on small farms, and therefore causes diffuse pollution. Therefore, duckweed pond have been successfully used in the swine waste polishing, generating further a biomass with high protein content. The present study evaluated the efficiency of two full scale duckweed ponds for the polishing of a small pig farm effluent, biomass yield and crude protein (CP) content. Duckweed pond series received the effluent from a biodigester-storage pond, with a flow rate of 1 m3/day (chemical oxygen demand rate ¼ 186 kg/ha day) produced by 300 animals. After 1 year a great improvement of effluent quality was observed, with removal of 96% of total Kjeldahl nitrogen (TKN) and 89% of total phosphorus (TP), on average. Nitrogen removal rate is one of the highest ever found (4.4 g TKN/m2 day). Also, the dissolved oxygen rose from 0.0 to 3.0 mg/L. The two ponds produced together over 13 tons of fresh biomass (90.5% moisture), with 35% of CP content, which represents a productivity of 24 tonsCP/ha year. Due to the high rate of nutrient removal, and also the high protein biomass production, duckweed ponds revealed, under the presented conditions, a great potential for the polishing and valorization of swine waste. Nevertheless, this technology should be better exploited to improve the sustainability of small pig farms in order to minimize the impacts of this activity on the environment

Subtidal benthic marine algae of the Marine State Park of Laje de Santos (São Paulo, Brazil)

O Parque Estadual Marinho da Laje de Santos tem sido apontado como local de elevada diversidade marinha. Apesar de sua importância para a conservação da biota marinha não existem resultados efetivamente publicados. O objetivo deste trabalho é o de caracterizar a flora marinha bentônica desse Parque Marinho. Amostragens foram realizadas por mergulho autônomo: uma qualitativa que incluiu a zona do sublitoral até a profundidade de 26 m e outra quantitativa em duas profundidades pré-determinadas, 10 e 20 m.. Dentre os 129 táxons encontrados, foram identificadas pela primeira vez, 5 espécies para o Estado de São Paulo, 3 espécies para o litoral brasileiro e 1 espécie para o Atlântico sul. As algas mais abundantes foram Sargasum vulgare e tufos compostos de coralináceas geniculadas e algas filamentosas. A freqüência de ocorrência dos táxons revelou que a maioria deles ocorreu em menos de 20 % das amostras. A análise da flora marinha bentônica demonstra que o Parque Estadual Marinho da Laje de Santos é um local de elevada riqueza e que sua composição florística esta relacionada a uma estrutura de comunidade bentônica dominada por populações de S. vulgare e grupos formadores de tufos.Laje de Santos Marine State Park has been pointed out as a site of high marine diversity. In spite of its importance to conservation of marine biota no results of investigations about its marine biodiversity have been published. The aim of this work was to characterize the subtidal seaweed flora of this Marine Park. Samplings were performed by scuba diving: a qualitative one that included the subtidal zone down to 26 m depth and other quantitative at two pre-determined depths, 10 and 20 m. Among the 129 taxa identified, 5 species were identified for the first time for the São Paulo State, 3 for the Brazilian coast and 1 for the South Atlantic Ocean. The most abundant algae were Sargassum vulgare and turf composed by geniculate coralline and filamentous groups. The frequency of occurrence of taxa revealed that most of species are restricted to frequencies less than 20 % in all samples. The analyses of the subtidal marine benthic algal flora indicate the Marine State Park of Laje de Santos as a site of elevated species richness and that its floristic composition is related to a benthic community structure dominated by turf-forming groups and population of S. vulgare

Enhancement of optical absorption by modulation of the oxygen flow of TiO2 films deposited by reactive sputtering

Oxygen-deficient TiO2 films with enhanced visible and near-infrared optical absorption have been deposited by reactive sputtering using a planar diode radio frequency magnetron configuration. It is observed that the increase in the absorption coefficient is more effective when the O2 gas supply is periodically interrupted rather than by a decrease of the partial O2 gas pressure in the deposition plasma. The optical absorption coefficient at 1.5 eV increases from about 1 102 cm 1 to more than 4 103 cm 1 as a result of the gas flow discontinuity. A red-shift of 0.24 eV in the optical absorption edge is also observed. High resolution transmission electron microscopy with composition analysis shows that the films present a dense columnar morphology, with estimated mean column width of 40 nm. Moreover, the interruptions of the O2 gas flow do not produce detectable variations in the film composition along its growing direction. X-ray diffraction and micro-Raman experiments indicate the presence of the TiO2 anatase, rutile, and brookite phases. The anatase phase is dominant, with a slight increment of the rutile and brookite phases in films deposited under discontinued O2 gas flow. The increase of optical absorption in the visible and near-infrared regions has been attributed to a high density of defects in the TiO2 films, which is consistent with density functional theory calculations that place oxygen-related vacancy states in the upper third of the optical bandgap. The electronic structure calculation results, along with the adopted deposition method and experimental data, have been used to propose a mechanism to explain the formation of the observed oxygen-related defects in TiO2 thin films. The observed increase in sub-bandgap absorption and the modeling of the corresponding changes in the electronic structure are potentially useful concerning the optimization of efficiency of the photocatalytic activity and the magnetic doping of TiO2 films

Drought tolerance conferred to sugarcane by association with Gluconacetobacter diazotrophicus: a transcriptomic view of hormone pathways

Sugarcane interacts with particular types of beneficial nitrogen-fixing bacteria that provide fixed-nitrogen and plant growth hormones to host plants, promoting an increase in plant biomass. Other benefits, as enhanced tolerance to abiotic stresses have been reported to some diazotrophs. Here we aim to study the effects of the association between the diazotroph Gluconacetobacter diazotrophicus PAL5 and sugarcane cv. SP70-1143 during water depletion by characterizing differential transcriptome profiles of sugarcane. RNA-seq libraries were generated from roots and shoots of sugarcane plants free of endophytes that were inoculated with G. diazotrophicus and subjected to water depletion for 3 days. A sugarcane reference transcriptome was constructed and used for the identification of differentially expressed transcripts. The differential profile of non-inoculated SP70-1143 suggests that it responds to water deficit stress by the activation of drought-responsive markers and hormone pathways, as ABA and Ethylene. qRT-PCR revealed that root samples had higher levels of G. diazotrophicus 3 days after water deficit, compared to roots of inoculated plants watered normally. With prolonged drought only inoculated plants survived, indicating that SP70-1143 plants colonized with G. diazotrophicus become more tolerant to drought stress than non-inoculated plants. Strengthening this hypothesis, several gene expression responses to drought were inactivated or regulated in an opposite manner, especially in roots, when plants were colonized by the bacteria. The data suggests that colonized roots would not be suffering from stress in the same way as non-inoculated plants. On the other hand, shoots specifically activate ABA-dependent signaling genes, which could act as key elements in the drought resistance conferred by G. diazotrophicus to SP70-1143. This work reports for the first time the involvement of G. diazotrophicus in the promotion of drought-tolerance to sugarcane cv. SP70-1143, and it describes the initial molecular events that may trigger the increased drought tolerance in the host plant

Body growth and phenotypic variation of the carcasses of native duck lineages (Cairina moschata)

Natives ducks are birds that require little handling and are resistant to many diseases that affect chickens. Thus, they adapt to low-input farming conditions, which contributes to the food security of small farmers. Although they exhibit potential for growth, their production characteristics are relatively unknown, so they are underexploited. The objective of this study was to compare how nonlinear models fit the growth curve of two genetic groups of duck and to evaluate variation based on carcass characteristics. Two hundred and twenty four animals were weighed weekly, from birth to 90 days of age. We used nonlinear models (Brody, Richards, Gompertz, Von Bertalanff and Logistic) to describe growth curve. For the evaluation of phenotypic variation, we measured seven carcass traits from 81 ducks carried out by principal component analysis. The logistic model best fit the growth curve, and the absolute growth rates (AGR) for the Catolé duck showed that females reached their maximum AGR at approximately 30 days but did not reach their ideal commercial weight. The drumstick, thigh and liver yields accounted for 41.17% of the differences between the Catolé and Paysandu ducks. The slaughter of male Catolé ducks is recommended between 70 and 90 days because a drastic decrease in growth occurs after this time. For the slaughter of females, feeding management modifications and improvement in growth indices are recommended to increase the final weight and AGR. The carcass yields indicate potential for native duck meat production

Collagen and Elastic Fibers in Odontogenic Entities: Analysis Using Light and Confocal Laser Microscopic Methods

Dentigerous cyst (DC) and keratocystic odontogenic tumor (KOT) are odontogenic lesions arising from epithelial elements, such as those observed in dental follicles (DF), that have been part of the tooth forming apparatus. These lesions show different clinical and histological characteristics, as well as distinct biological behavior. This study aimed to qualify and quantify collagen and elastic fibers by means of histochemical techniques with light and confocal laser microscopic methods in three odontogenic entities. Eleven DF, 13 DC (n=10 with inflammation, n=3 without inflammation) and 13 KOT were processed to the following techniques: Hematoxylin and Eosin, Masson’s Trichrome, Picrosirius, Direct Blue, and Orcein. DF and DC without inflammation exhibited collagen with similar characteristics: no parallel pattern of fiber orientation, thick fibers with dense arrangement, and absence of distinct layers. A comparison between DC with inflammation and KOT revealed similar collagen organization, showing distinct layers: thin collagen fibers with loose arrangement near the epithelium and thick fibers with dense arrangement in distant areas. The only difference found was that KOT exhibited a parallel collagen orientation in relation to the odontogenic epithelia. It may be suggested that the connective tissue of DC is a reactive tissue, inducing an expansive growth associated with fluid accumulation and inflammatory process, which in turn may be present as part of the lesion itself. In KOT, loosely arranged collagen may be associated with the behavior of the neoplastic epithelium

Obtaining high purity silica from rice hulls

Many routes for extracting silica from rice hulls are based on direct calcining. These methods, though, often produce silica contaminated with inorganic impurities. This work presents the study of a strategy for obtaining silica from rice hulls with a purity level adequate for applications in electronics. The technique is based on two leaching steps, using respectively aqua regia and Piranha solutions, which extract the organic matrix and inorganic impurities. The material was characterized by Fourier-transform infrared spectroscopy (FTIR), powder x-ray diffraction (XRD), x-ray fluorescence (XRF), scanning electron microscopy (SEM), particle size analysis by laser diffraction (LPSA) and thermal analysis

The Effect of Sward Surface Height on Sheep Grazing Activities

The objective of this study was to assess the effect of Italian ryegrass (Lolium multiflorum Lam.) sward height on grazing activities. The experiment was carried out at the Research Station of Universidade Federal do Rio Grande do Sul, Brazil. Yearling no-castrated male lambs behavior was assessed in terms of diurnal grazing, ruminating and idling time in three periods: 27 September 11 and 25 October. Sward surface height was monitored using a sward stick and samples of 0.25 m2 were cut to ground level to estimate herbage and leaf lamina mass. The experiment was carried out in a randomised block design with three replications of four treatments: sward surface heights (5, 10, 15 and 20 cm). Grazing time and ruminating time were somewhat interchangeable, decreasing grazing time and increasing ruminating time with increasing sward surface heights. Idling time remained relatively constant. Sward height showed a small effect on biting rate

Polypropylene meshes coated with chitosan/polyethylene glycol for the reconstruction of the abdominal wall: an experimental study in rats

The aim of this study was to characterize the tissue reactions triggered by the polypropylene mesh coated with chitosan and polyethylene glycol film, and if it's able to prevent the formation of peritoneal adhesions. Defects in the abdominal wall of rats were induced and polypropylene meshes coated with chitosan/polyethylene glycol (CPEG group, n= 12) and uncoated (PP control group, n= 12) were implanted. On the fourth and forty-fifth postoperative day the formation of adhesion and the tissue reaction to the biomaterial was evaluated through histological and histochemical analysis. The area (P= 0.01) and severity (P= 0.002) of the adhesion was significatively less in the CPEG group. On the fourth day the foreign body reaction was less intense in CPEG group (P= 0.018) and the production of collagen fibers was more intense in this group (P= 0.041). The tissue reactions caused by the biomaterials were similar on the 45th day, with the exception of the high organization of collagen fibers in the CPEG group. The CPEG meshes did not fully prevent the formation of adhesions, but minimized the severity of the process. The foreign body reaction promoted by polypropylene meshes coated with CPEG is less intense than that triggered by uncoated polypropylene meshes71411981206CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESPsem informaçãosem informaçãosem informaçã