257 research outputs found

    IT Governance Mechanisms at Universities: An Exploratory Study

    Get PDF
    The pervasive use of technology has created a critical dependency on IT that requires particular attention to IT Governance (ITG). A set of ITG mechanisms involving structures, processes and relational mechanisms can be considered to implement IT governance and enhance business/IT alignment. Universities are organizations with a specific context and depend on IT for the success in teaching and learning, research and service. However, ITG implementation in universities has not received much attention and research in this type of organization is scarce. Therefore, the purpose of this research is to identify the most appropriate set of ITG mechanisms for universities. Semi-structured interviews with CIOs in ten universities from five countries were carried out. This research proposes six new ITG mechanisms to be added to the current set of ITG mechanisms. This research concludes by presenting the limitations and future work

    Information technology governance for higher education institutions: a multi-country study

    Get PDF
    Information Technology governance (ITG) calls for the definition and implementation of formal practices at the highest level in the organization, involving structures, processes and relational practices for the creation of business value from IT investments. However, determining the right ITG practices remains a complex endeavor. Previous studies identify IT governance practices used in the health and financial sectors. As universities have many unique characteristics, it is highly unlikely that the ITG experiences of the financial and health industry can be directly applied to universities. This study, using Design Science Research (DSR), develops a baseline with advised practices for the university sector. The analysis of thirty-four case studies from the literature review provides a set of practices as a starting point for the development of the baseline model proposal through multiple case studies involving interviews with IT directors, in ten universities in five countries: eight new practices emerge in this study. The model proposed was evaluated by experts. The result is a baseline model with adequate practices for IT governance in universities as well as a set of guidelines for its implementation. Findings revealed that is possible to extend the ITG practices’ baseline when looking at specific contexts.This work has been supported by CAPES Foundation, Ministry of Education of Brazil Process n.º10415/13-0 and by FCT Fundação para a Ciência e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020

    Incidência de úlceras por pressão associadas a dispositivos médicos

    Get PDF
    Dissertação de Mestrado em Enfermagem Médico-Cirúrgica apresentada na Escola Superior de Saúde do Instituto Politécnico de Viana do CasteloOs cuidados de enfermagem, no que respeita à pessoa em situação crítica, têm vindo a evoluir significativamente ao longo dos tempos. Este facto traduz um aumento de técnicas e intervenções cada vez mais invasivas e procedimentos mais complexos, com o objetivo de otimizar o estado de saúde da pessoa, o que pode ter como consequência o surgimento de úlceras por pressão associadas a dispositivos médicos (UPADM). Estas ocorrem em qualquer pessoa que seja sujeita à aplicação de um dispositivo médico e dependem frequentemente da condição da pessoa e da necessidade dos meios de suporte para assegurar as melhores condições para a recuperação da saúde. O presente estudo foi realizado numa Unidade de Cuidados Intermédios de um Hospital Central da Região Norte, sendo um estudo descritivo – correlacional, que tem com o objetivo de descrever a incidência das UPADM e analisar fatores relacionados com estas. A amostra foi constituída por 134 pessoas com internamento no período de 1 de maio de 2015 a 30 de outubro de 2015. As idades variaram entre os 17 e os 100 anos, com média de 65,13 ± 17,56 anos e mediana 68 anos, predominando o sexo masculino (57,5%). Os diagnósticos mais comuns foram do foro traumático e metabólico e 91,8% das pessoas apresentaram uma ou mais comorbilidades. O tempo de internamento variou entre 0 e 15 dias, com a média de 3,49 ± 2,873 dias. 64,2% das pessoas apresentavam necessidade de posicionamento de 3 em 3 horas e o risco de UP avaliado através da escala de Braden foi maioritariamente alto (60,4%). Na admissão, estavam presentes úlceras por pressão em 11,2% das pessoas internadas. O dispositivo mais utilizado foi o oxímetro (100%), seguido das tubuladuras, catéteres venosos periféricos e adesivos (97,8 %) e do cateter urinário (91,0%). A taxa de incidência de UPADM foi de 11,9%, predominando nas pessoas com máscara de ventilação não invasiva (VNI), seguidas das pessoas com sonda nasogástrica (SNG), não se observando úlceras relacionadas com a utilização de outros dispositivos. O tempo para o surgimento de UPADM nas máscaras de VNI variou entre 1 e 5 dias, com média de 1,86 ± 1,099 dias e nas SNG variou entre 1 e 2 dias, com média de 1,5 ± 0,707 dias. No que respeita às categorias, foram verificadas UPADM de categorias I e II, todas na região do nariz. Observou-se associação entre a presença de UPADM e o foro do diagnóstico de admissão, o tempo de internamento e a avaliação de risco pela Escala de Braden.O desenvolvimento de UPADM tem relação com questões principalmente de ordem clínica. No entanto, cabe ao enfermeiro e ao enfermeiro especialista em enfermagem em pessoa em situação crítica avaliar a pessoa de forma holística estando atento a todas as suas necessidades quando estabelece o risco, planeia, executa e avalia os cuidados de enfermagem e atitudes terapêuticas.Nursing care in relation to the person in critical condition, have evolved significantly over time. This reflects an increase of techniques, more invasive interventions and more complex procedures with the objective of optimizing the health of the person, which may result in the appearance of medical devices related pressure ulcers (MDRPU). These occur in any person who is subject to the application of a medical device and often depend on the person's condition and the need of the support means to ensure the best conditions for the recovery of health. This study was conducted in an Intermediate Care Unit of Central Hospital in the Northern Region of Portugal. Is a descriptive – correlational study, which is aiming to describe the incidence of UPADM and analyze factors related to these. The sample consisted of 134 people with internment in the period from 1 May 2015 to 30 October 2015. The ages range between 17 and 100 years, with a mean of 65.13 ± 17.56 years, median 68 years, predominantly males (57.5%). The most common diagnoses were the traumatic and metabolic disorders and 91.8% of people had one or more comorbidities. The length of stay varied between 0 and 15 days, with a mean of 3.49 ± 2.873 days. 64.2% of people had need to position 3 in 3 hours and the risk of PU assessed by the Braden Scale was mostly high (60.4%). On admission, were present pressure ulcers in 11.2% of hospitalized people. The most widely used device was the oximeter (100%), followed by necked, peripheral venous catheters and adhesives (97.8%) and the urinary catheter (91.0%). The rate of incidence of MDRPU was 11.9%, dominating in people with non-invasive ventilation mask (NIV), followed by people with a nasogastric tube (NGT), not observing ulcers related to the use of other devices. The time for the emergence of MDRPU in the NIV masks ranged between 1 and 5 days, with a mean of 1.86 ± 1.099 days and in SNG ranged between 1 and 2 days, averaging 1.5 ± 0.707 days. As regards the categories MDRPU were checked categories I and II, all in the nose region. It is observed association between the presence of MDRPU and the admission diagnosis, length of stay and risk assessment by the Braden Scale. The development of MDRPU is mainly clinical order. However, it is the nurse and the nurse specialist in person in critical condition that should evaluate holistically the person,being attentive to all their needs when establishing the risk, plans, executes and evaluates the nursing care and therapeutic approaches

    Polyphenolic prevention of deoxyribose damage using spectroscopic methods

    Get PDF
    Hydroxyl radical formation via Fe2+/Cu+ metal leads to oxidative DNA damage that is implicated in a number of neurodegenerative and cardiovascular diseases such as Parkinson’s diseases and atherosclerosis. Specifically, oxidative stress can lead to strand breaks and other DNA damage. Antioxidants can prevent this damage through metal binding and radical scavenging mechanisms. Polyphenols are one class of abundant antioxidants shown to provide protection against radical species and are found in foods such as fruits, nuts, and berries. Therefore, polyphenol compounds were tested for their ability to prevent deoxyribose degradation by iron and hydrogen peroxide using the deoxyribose assay, a low-cost, screening method that measures the formation of malondialdehyde (MDA), a byproduct of degraded deoxyribose, using ultraviolet-visible (UV-vis) spectroscopy. Previous studies showed low reproducibility when reporting deoxyribose damage prevention by antioxidants. Using a newly modified deoxyribose assay in the Brumaghim lab that improves reproducibility, quinolinic acid and four polyphenols (MEGA, MEPCA, PrEGA, and PCA) were tested for their antioxidant abilities. These results were compared to polyphenol prevention of plasmid DNA damage by iron and hydrogen peroxide using gel electrophoresis, a method that uses DNA as the substrate but is lower-throughput. Compared to plasmid DNA damage prevention, MEGA, MEPCA, PrEGA, and PCA, show greater deoxyribose damage prevention using the deoxyribose assay. Relating antioxidant activity measurements between these two methods enables accurate use of the deoxyribose assay as a higher-throughput method for determining DNA damage or its inhibition compared to DNA gel electrophoresis methods

    Soluções de transição da sobrelevação no projeto de autoestradas

    Get PDF
    Mestrado em Engenharia CivilNo presente trabalho é proposta uma análise sobre as condições de drenagem de águas pluviais em zonas de transição da sobrelevação nas autoestradas. A preocupação na redução dos acidentes rodoviários tem sido crescente nos últimos anos. Bastantes acidentes rodoviários são causados diretamente por erros de conceção e projeto das vias da comunicação. Uma problemática bastante pertinente é a acumulação de águas pluviais nas faixas de rodagem, que se traduz na perda de aderência a velocidades menores que as de projeto, através do fenómeno da hidroplanagem. As zonas de sobrelevação são pontos singulares. As autoestradas apresentam características especiais, por exemplo, um perfil transversal extenso e velocidade de circulação elevada. A combinação destes dois elementos exige uma análise cuidada. Desta forma, com a utilização de uma ferramenta gráfica e numérica, o Matlab, foi desenvolvido um script que é um programa que através da introdução dos dados que definem o plano e as chuvadas, são devolvidos valores para analisar a drenagem de água na via e permite também a comparação entre os diferentes tipos de soluções de disfarce. Como principais conclusões foi possível reter que as soluções parabólicas mais complexas apresentam melhor desempenho na drenagem de água e foi percetível que a utilização de métodos simples que calculem a altura da lâmina de água apenas através da extensão da linha de escoamento apresentam limitações na utilização de concordâncias longitudinais.In this work an analysis of the conditions of stormwater drainage in areas of transition from superelevation in highways is proposed. The concern in reducing road accidents has been increasing in recent years. Plenty of road accidents are caused directly by errors in conceiving and design of communication pathways. A very pertinent issue is the accumulation of rainwater in the lanes, which results in loss of traction at speeds less than the project through the phenomenon of hydroplaning. The superelevation zones are singular points. The roads have special characteristics, for example, extensive cross-section and higher velocity. The combination of these two elements requires careful analysis. Therefore, using a graphical and numerical tool, Matlab, was developed a script which is a program that by introducing the data that defines the plan and rainstorms, values are returned to analyze the water drainage on the road and also allows the comparison between different solutions. The main conclusions was possible to retain the most complex parabolic solutions present perform better in water drainage and it was noticeable that the use of simple methods to calculate the height of the water blade only through the extension of the outflow line of the present limitations in the use of longitudinal concordances

    Caracterização física do mármore português, estudos preliminares com vista à otimização da sua aplicação em obra

    Get PDF
    O ensaio de ultra-sons baseia-se na medição do tempo que uma onda de alta frequência demora a atravessar um corpo. Para tal são definidos dois pontos diametralmente opostos, onde num é colocado um transdutor que irá converter um impulso eléctrico numa onda ultra-sónica e noutro, um transdutor receptor que volta a reconverter a onda num sinal eléctrico. A monitorização numa unidade central do aparelho, permite determinar a velocidade de propagação da onda, possibilitando uma caracterização física do corpo a ensaiar

    Desenvolvimento e optimização de sistemas de transmissão por fibra óptica de muito alto débito em banda lateral única

    Get PDF
    Mestrado em Engenharia Electrónica e TelecomunicaçõesO trabalho apresentado nesta dissertação é dedicado ao desenvolvimento e optmização de emissores ópticos em banda lateral única para taxas de transmissão de 10 e 40 Gbit/s. Esta dissertação começa com um estudo teórico sobre a geração e detecção de sinais ópticos em banda lateral única. Neste estudo apresenta-se as diversas técnicas usadas na geração deste formato de modulação analisandose em detalhe os metodos que envolvem o processamento eléctrico da transformada de Hilbert. É proposta uma optimização, ao nível dos circuitos eléctricos, de um emissor óptico em banda lateral única para um ritmo de transmissão de 10 Gbit/s apresentando-se os resultados da propagação em fibra óptica do sinal gerado. Vários filtros de quadratura são estudados com o objectivo de implementar a transformada de Hilbert em sinais eléctricos com larguras de banda de 40 GHz. Como resultado deste estudo desenvolvolve-se um acoplador híbrido com 9 secções que implementa esta transformada em sinais eléctricos com uma larguras de banda entre 3 e 37 GHz. Finalmente estuda-se o efeito dispersivo das linhas de transmissão microstrip desenvolvendo-se compensadores eléctricos de dispersão cromática para sistemas ópticos em banda lateral única com ritmos de transmissão de 10 e 40 Gbit/s. ABSTRACT: This work concerns the development and optimization of 10 and 40 Gbit/s optical single sideband emitters. This dissertation starts with a theoretical study about the generation and detection of optical single sideband signals. In this study, several techniques used to generate this modulation format are presented with a detailed analysis on the methods which use the electric processing of the Hilbert transform. An optimization, at the electric circuit level, is proposed to a 10 Gbit/s optical single sideband emitter and the propagation results of the generated signal over optical fibre. Several quadrature filters were studied with the aim of implement the Hilbert transform in electrical signals with bandwidths of 40 GHz. As a result, 9 sections hybrid coupler is developed which implements this function in electric signals in a bandwidth of 3 to 37 GHz. Finally, the microstrip transmission lines dispersion effect is studied and electric chromatic dispersion compensators are developed for 10 and 40 Gbit/s optical single sideband systems

    Gatilho: encenação de autorretratos de violência sobre o sexo masculino

    Get PDF
    Trabalho de Projeto submetido à Escola Superior de Teatro e Cinema para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Teatro - especialização em Artes PerformativasA performance de longa duração Gatilho: encenação de autorretratos de violência sobre o sexo masculino é um processo de estudo do cruzamento entre a fotografia e o teatro. A exposição da encenação - desde a caracterização e interpretação de personagens, ao disparo da máquina fotográfica e respetiva projeção dos autorretratos - aborda questões sobre a comunicação que uma fotografia encenada pode gerar. A morte pela fotografia, defendida por Roland Barthes, é associada à performance numa perspetiva de passagem de tempo e de transformação do ator nas narrativas apresentadas sobre o homem como vítima de violência. A fotografia - seja ela encarada como registo fiel de uma identidade ou como manipulação do rosto de um ator através da maquilhagem - cria o dilema que François Soulages defende ao afirmar que qualquer fotografia é encenada, dado que qualquer tipo de fotografia tem um enquadramento artístico estudado para o efeito pretendido, podendo, ainda, somar-se-lhe uma pose, ou seja, uma construção, qual personagem de teatro, por parte de quem é fotografado. Por fim, a fotografia como objeto de reflexão sobre as narrativas sugeridas, através da proposta de Susan Sontag, reflete-se na contemplação dos autorretratos de Nan Goldin e Cindy Shermam. Pretende-se dissertar - com base nas obras dos autores supracitados e aplicando a ideia de distanciamento que advém de práticas brechtianas, juntamente com a conceção de construção de personagem da pedagogia de João Brites - sobre um plano de ação de transformação de uma sociedade a partir da violência no sexo masculino. A performance Gatilho centra-se na tentativa de mitigar uma herança patriarcal através do jogo cénico no cruzamento entre performance, teatro e fotografia.ABSTRACT - The long-term performance Gatilho: staging self-portraits of male-aimed violence is a reflection on the intersection between photography and theater. The exhibition of the staging, from the costume, make-up and interpretation of characters to the shooting of the camera and respective projection of self-portraits, addresses questions about the communication that a staged photograph can generate. The death by photography theorized by Roland Barthes is associated with performance according to the perspective of the passage of time and the transformation of the actor in the narratives presented about man as a victim of violence. Photography, whether seen as a faithful record of an identity or as manipulation of an actor's face through make-up, creates the dilemma that François Soulages identifies when he states that any photograph is staged, given that any type of photograph has a studied artistic framing for the intended effect, with the possibility of adding a pose; that is, a construction, like a theater character, by the person who is being photographed. Finally, photography as an object of reflection on the suggested narratives, through Susan Sontag's proposal, is reflected in the contemplation of the self-portraits by Nan Goldin and Cindy Sherman. Based on the works by the aforementioned authors and applying the idea of distancing that comes from Brechtian practices, together with the conception of character construction present in João Brites' pedagogy, this work aims at reflecting on an action plan for the transformation of society through male violence. The performance Gatilho focuses on the attempt to mitigate patriarchal heritage through the scenic interplay among performance, theater and photography.N/

    Methodology for building and maintaining enterprise architectures in small and medium enterprises

    Get PDF
    Dissertação de mest., Engenharia Informática, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2013Enterprise architectures are used by companies so that they can understand their structure and dynamics in a more extensive and detailed way, allowing them to reduce costs, increase productivity, promote growth and adapt in a rapidly changing business environment. In order to not only survive but gain competitive advantage, enterprises need their architectures to be in sync with their business, which means being as faithful and up-to-date as possible. Current methodologies for developing architectures such as Enterprise Architecture Planning (EAP) are designed for large companies and need to be adapted to be applicable to small and medium enterprises (SMEs). Also EAP develops the business model based in information gathered in interviews and surveys, which means the processes in the model are at an abstraction level that does not reflect the actual actions being performed by individuals. Additionally, current publications in this area don’t cover how these models can be maintained in automated ways. Stemming from these arguments, the main contributions of this research are first, to adapt EAP defining a methodology that can be applied to a SME. Second, to merge EAP with the Business Process and Practice Alignment Methodology (BPPAM) in order to be able to uncover a business process model from actual work practices captured in users’ action logs. And third, to develop automated ways of analyzing and relating the model with these action logs in order to ease the maintenance of the business model. This research was developed and validated in a real organizational setting within the purchasing department of a company in the retail industry. This work concludes with an overview of what was learned; how some problems found could have been prevented; and how the proposed methodology can be improved for future research.As arquiteturas empresariais são usadas pelas empresas de forma a compreenderem a sua estrutura e dinâmica de uma forma extensiva e detalhada, o que lhes permite reduzir custos, aumentar a produtividade, promover o crescimento e adaptar-se a um ambiente de negócios em rápida mudança. Não apenas para sobreviver como também para ganhar vantagem competitiva, as empresas precisam que as suas arquiteturas estejam em sincronia com o seu negócio, o que significa que estas têm de ser tão fiéis e atualizadas quanto possível. Metodologias atuais para o desenvolvimento de arquiteturas, como o Enterprise Architecture Planning (EAP) são desenvolvidas para grandes empresas e precisam ser adaptadas para ser aplicáveis a pequenas e médias empresas (PMEs). Também, o EAP constrói o modelo de negócio baseado em informações recolhidas em entrevistas e formulários o que significa que os processos no modelo têm um nível de abstração que não reflete as ações que estão na realidade a ser executadas pelos indivíduos. Além disso, as publicações existentes nesta área não cobrem como estes modelos podem ser mantidos de maneira automatizada. Partindo destes argumentos, as principais contribuições do nosso trabalho são primeiro, adaptar o EAP definindo uma metodologia que pode ser aplicada a uma PME. Em segundo lugar, juntar o EAP com o Business Process and Practice Alignment Methodology (BPPAM) a fim de ser capaz de obter um modelo de processos de negócio a partir de práticas de trabalho reais, capturadas em logs com ações dos utilizadores. E terceiro, desenvolver formas automatizadas de análise e relacionamento do modelo com esses logs de ação, a fim de facilitar a manutenção do modelo de negócio. A nossa investigação foi desenvolvida e validada num cenário organizacional real dentro do departamento de compras de uma empresa no setor de vendas a retalho. Este trabalho conclui apresentando uma visão geral do que foi aprendido; como alguns problemas encontrados poderiam ter sido evitados; e como a metodologia proposta pode ser melhorada para investigação no futuro

    Effective IT governance mechanisms in higher education institutions: An empirical study

    Get PDF
    Particular attention to IT Governance is required when the pervasive use of technology has created critical dependencies on IT for organizational performance and prosperity. This study attempts to assess the importance of specific mechanisms for the effectiveness of IT governance in the context of higher educational institutions. Using a qualitative approach with in-depth interviews and document analysis to collect data, a study was carried out across several countries. A mechanism in each type (structure, process, and relational) emerge as quite important: IT Strategy Committee (structure), IT Strategic Planning (process) and IT Leadership (relational).CAPES Foundation, Ministry of Education of Brazil Process n.º10415/13-0 and by FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/201
    corecore