Sulfur-Modulated Tin Sites Enable Highly Selective Electrochemical Reduction of CO2 to Formate

Electrochemical reduction of carbon dioxide (CO2RR) to formate provides an avenue to the synthesis of value-added carbon-based fuels and feedstocks powered using renewable electricity. Here, we hypothesized that the presence of sulfur atoms in the catalyst surface could promote undercoordinated sites, and thereby improve the electrochemical reduction of CO2 to formate. We explored, using density functional theory, how the incorporation of sulfur into tin may favor formate generation. We used atomic layer deposition of SnSx followed by a reduction process to synthesize sulfur-modulated tin (Sn(S)) catalysts. X-ray absorption near-edge structure (XANES) studies reveal higher oxidation states in Sn(S) compared with that of tin in Sn nanoparticles. Sn(S)/Au accelerates CO2RR at geometric current densities of 55 mA cm−2 at −0.75 V versus reversible hydrogen electrode with a Faradaic efficiency of 93%. Furthermore, Sn(S) catalysts show excellent stability without deactivation (<2% productivity change) following more than 40 hours of operation. With rapid advances in the efficient and cost-effective conversion of sunlight to electrical power, the development of storage technologies for renewable energy is even more urgent. Using renewable electricity to convert CO2 into formate simultaneously addresses the need for storage of intermittent renewable energy sources and the need to reduce greenhouse gas emissions. We report an increase of greater than 4-fold in the current density (hence the rate of reaction) in formate electrosynthesis compared with relevant controls. Our catalysts also show excellent stability without deactivation (<2% productivity change) following more than 40 hours of operation. The electrochemical reduction of carbon dioxide (CO2RR) offers a compelling route to energy storage and high-value chemical manufacture. The presence of sulfur atoms in catalyst surfaces promotes undercoordinated sites, thereby improving the electrochemical reduction of CO2 to formate. The resulting sulfur-modulated tin catalysts accelerate CO2RR at geometric current densities of 55 mA cm−2 at −0.75 V versus RHE with a Faradaic efficiency of 93%

Experiences, Opportunities and Challenges of Implementing Task Shifting in Underserved Remote Settings: The Case of Kongwa District, Central Tanzania.

Tanzania is experiencing acute shortages of Health Workers (HWs), a situation which has forced health managers, especially in the underserved districts, to hastily cope with health workers' shortages by adopting task shifting. This has however been due to limited options for dealing with the crisis of health personnel. There are on-going discussions in the country on whether to scale up task shifting as one of the strategies for addressing health personnel crisis. However, these discussions are not backed up by rigorous scientific evidence. The aim of this paper is two-fold. Firstly, to describe the current situation of implementing task shifting in the context of acute shortages of health workers and, secondly, to provide a descriptive account of the potential opportunities or benefits and the likely challenges which might ensue as a result of implementing task shifting. We employed in-depth interviews with informants at the district level and supplemented the information with additional interviews with informants at the national level. Interviews focussed on the informants' practical experiences of implementing task shifting in their respective health facilities (district level) and their opinions regarding opportunities and challenges which might be associated with implementation of task shifting practices. At the national level, the main focus was on policy issues related to management of health personnel in the context of implementation of task shifting, in addition to seeking their opinions and perceptions regarding opportunities and challenges of implementing task shifting if formally adopted. Task shifting has been in practice for many years in Tanzania and has been perceived as an inevitable coping mechanism due to limited options for addressing health personnel shortages in the country. Majority of informants had the concern that quality of services is likely to be affected if appropriate policy infrastructures are not in place before formalising tasks shifting. There was also a perception that implementation of task shifting has ensured access to services especially in underserved remote areas. Professional discontent and challenges related to the management of health personnel policies were also perceived as important issues to consider when implementing task shifting practices. Additional resources for additional training and supervisory tasks were also considered important in the implementation of task shifting in order to make it deliver much the same way as it is for conventional modalities of delivering care. Task shifting implementation occurs as an ad hoc coping mechanism to the existing shortages of health workers in many undeserved areas of the country, not just in the study site whose findings are reported in this paper. It is recommended that the most important thing to do now is not to determine whether task shifting is possible or effective but to define the limits of task shifting so as to reach a consensus on where it can have the strongest and most sustainable impact in the delivery of quality health services. Any action towards this end needs to be evidence-based

smokeSALUD: exploring the effect of demographic change on the smoking prevalence at municipality level in Austria

Background: Reducing the smoking population is still high on the policy agenda, as smoking leads to many preventable diseases, such as lung cancer, heart disease, diabetes, and more. In Austria, data on smoking prevalence only exists at the federal state level. This provides an interesting overview about the current health situation, but for regional planning authorities these data are often insufficient as they can hide pockets of high and low smoking prevalence in certain municipalities. Methods: This paper presents a spatial-temporal change of estimated smokers for municipalities from 2001 and 2011. A synthetic dataset of smokers is built by combining individual large-scale survey data and small area census data using a deterministic spatial microsimulation approach. Statistical analysis, including chi-square test and binary logistic regression, are applied to find the best variables 24 for the simulation model and to validate its results. Results: As no easy-to-use spatial microsimulation software for non-programmers is available yet, a flexible web-based spatial microsimulation application for health decision support (called simSALUD) has been developed and used for these analyses. The results of the simulation show in general a decrease of smoking prevalence within municipalities between 2001 and 2011 and 29 differences within areas are identified. These results are especially valuable to policy decision makers for future planning strategies. Conclusions: This case study shows the application of smokeSALUD to model the spatial-temporal changes in the smoking population in Austria between 2001 and 2011. This is important as no data on smoking exists at this geographical scale (municipality). However, spatial microsimulation models are useful tools to estimate small area health data and to overcome these problems. The simulations and analysis should support health decision makers to identify hot spots of smokers and this should 36 help to show where to spend health resources best in order to reduce health inequalities

Pre-cooling for endurance exercise performance in the heat: a systematic review.

PMCID: PMC3568721The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1741-7015/10/166. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Endurance exercise capacity diminishes under hot environmental conditions. Time to exhaustion can be increased by lowering body temperature prior to exercise (pre-cooling). This systematic literature review synthesizes the current findings of the effects of pre-cooling on endurance exercise performance, providing guidance for clinical practice and further research

Nutrition Strategies for Triathlon

Contemporary sports nutrition guidelines recommend that each athlete develop a personalised, periodised and practical approach to eating that allows him or her to train hard, recover and adapt optimally, stay free of illness and injury and compete at their best at peak races. Competitive triathletes undertake a heavy training programme to prepare for three different sports while undertaking races varying in duration from 20 min to 10 h. The everyday diet should be adequate in energy availability, provide CHO in varying amounts and timing around workouts according to the benefits of training with low or high CHO availability and spread high-quality protein over the day to maximise the adaptive response to each session. Race nutrition requires a targeted and well-practised plan that maintains fuel and hydration goals over the duration of the specific event, according to the opportunities provided by the race and other challenges, such as a hot environment. Supplements and sports foods can make a small contribution to a sports nutrition plan, when medical supplements are used under supervision to prevent/treat nutrient deficiencies (e.g. iron or vitamin D) or when sports foods provide a convenient source of nutrients when it is impractical to eat whole foods. Finally, a few evidence-based performance supplements may contribute to optimal race performance when used according to best practice protocols to suit the triathlete’s goals and individual responsiveness

Osmoregulators proline and glycine betaine counteract salinity stress in canola

Salt inundation leads to increased salinization of arable land in many arid and semi-arid regions. Until genetic solutions are found farmers and growers must either abandon salt-affected fields or use agronomic treatments that alleviate salt stress symptoms. Here, field experiments were carried out to study the effect of the osmoregulators proline at 200 mg L-1 and glycine betaine at 400 mg L-1 in counteracting the harmful effect of soil salinity stress on canola plants grown in Egypt. We assessed growth characteristics, yield and biochemical constituents. Results show first that all growth characters decreased with increasing salinity stress but applied osmoregulators alleviated these negative effects. Second, salinity stress decreased photosynthetic pigments, K and P contents, whilst increasing proline, soluble sugars, ascorbic acid, Na and Cl contents. Third, application of osmoregulators without salt stress increased photosynthetic pigments, proline, soluble sugars, N, K and P contents whilst decreasing Na and Cl contents. It is concluded that the exogenously applied osmoregulators glycine betaine and proline can fully or partially counteract the harmful effect of salinity stress on growth and yield of canola.© INRA and Springer-Verlag, France 2012

British Society of Gastroenterology Best Practice Guidance: outpatient management of cirrhosis - part 3: special circumstances

\ua9 2023 BMJ Publishing Group. All rights reserved.The prevalence of cirrhosis has risen significantly over recent decades and is predicted to rise further. Widespread use of non-invasive testing means cirrhosis is increasingly diagnosed at an earlier stage. Despite this, there are significant variations in outcomes in patients with cirrhosis across the UK, and patients in areas with higher levels of deprivation are more likely to die from their liver disease. This three-part best practice guidance aims to address outpatient management of cirrhosis, in order to standardise care and to reduce the risk of progression, decompensation and mortality from liver disease. Part 1 addresses outpatient management of compensated cirrhosis: screening for hepatocellular cancer, varices and osteoporosis, vaccination and lifestyle measures. Part 2 concentrates on outpatient management of decompensated disease including management of ascites, encephalopathy, varices, nutrition as well as liver transplantation and palliative care. In this, the third part of the guidance, we focus on special circumstances encountered in managing people with cirrhosis, namely surgery, pregnancy, travel, managing bleeding risk for invasive procedures and portal vein thrombosis

British Society of Gastroenterology Best Practice Guidance: outpatient management of cirrhosis - part 1: compensated cirrhosis

\ua9 2023 BMJ Publishing Group. All rights reserved.The prevalence of cirrhosis has risen significantly over recent decades and is predicted to rise further. Widespread use of non-invasive testing means cirrhosis is increasingly diagnosed at an earlier stage. Despite this, there are significant variations in outcomes in patients with cirrhosis across the UK, and patients in areas with higher levels of deprivation are more likely to die from their liver disease. This three-part best practice guidance aims to address outpatient management of cirrhosis, in order to standardise care and to reduce the risk of progression, decompensation and mortality from liver disease. Here, in part one, we focus on outpatient management of compensated cirrhosis, encompassing hepatocellular cancer surveillance, screening for varices and osteoporosis, vaccination and lifestyle measures. We also introduce a compensated cirrhosis care bundle for use in the outpatient setting. Part two concentrates on outpatient management of decompensated disease including management of ascites, encephalopathy, varices, nutrition as well as liver transplantation and palliative care. The third part of the guidance covers special circumstances encountered in managing people with cirrhosis: surgery, pregnancy, travel, managing bleeding risk for invasive procedures and portal vein thrombosis

Internal and external cooling methods and their effect on body temperature, thermal perception and dexterity

© 2018 The Authors. Published by PLOS. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.1371/journal.pone.0191416© 2018 Maley et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Objective The present study aimed to compare a range of cooling methods possibly utilised by occupational workers, focusing on their effect on body temperature, perception and manual dexterity. Methods Ten male participants completed eight trials involving 30 min of seated rest followed by 30 min of cooling or control of no cooling (CON) (34C, 58% relative humidity). The cooling methods utilised were: ice cooling vest (CV0), phase change cooling vest melting at 14C (CV14), evaporative cooling vest (CVEV), arm immersion in 10C water (AI), portable water-perfused suit (WPS), heliox inhalation (HE) and ice slushy ingestion (SL). Immediately before and after cooling, participants were assessed for fine (Purdue pegboard task) and gross (grip and pinch strength) manual dexterity. Rectal and skin temperature, as well as thermal sensation and comfort, were monitored throughout. Results Compared with CON, SL was the only method to reduce rectal temperature (P = 0.012). All externally applied cooling methods reduced skin temperature (P0.05). Conclusion The present study observed that ice ingestion or ice applied to the skin produced the greatest effect on rectal and skin temperature, respectively. AI should not be utilised if workers require subsequent fine manual dexterity. These results will help inform future studies investigating appropriate pre-cooling methods for the occupational worker.This project is financially supported by the US Government through the Technical Support Working Group within the Combating Terrorism Technical Support Office.Published versio