Electron transport properties of sub-3-nm diameter copper nanowires

Density functional theory and density functional tight-binding are applied to model electron transport in copper nanowires of approximately 1 nm and 3 nm diameters with varying crystal orientation and surface termination. The copper nanowires studied are found to be metallic irrespective of diameter, crystal orientation and/or surface termination. Electron transmission is highly dependent on crystal orientation and surface termination. Nanowires oriented along the [110] crystallographic axis consistently exhibit the highest electron transmission while surface oxidized nanowires show significantly reduced electron transmission compared to unterminated nanowires. Transmission per unit area is calculated in each case, for a given crystal orientation we find that this value decreases with diameter for unterminated nanowires but is largely unaffected by diameter in surface oxidized nanowires for the size regime considered. Transmission pathway plots show that transmission is larger at the surface of unterminated nanowires than inside the nanowire and that transmission at the nanowire surface is significantly reduced by surface oxidation. Finally, we present a simple model which explains the transport per unit area dependence on diameter based on transmission pathways results

Experimental evidence that ovary and oviducal gland extracts influence male agonistic behavior in squids

Author Posting. © Marine Biological Laboratory, 2004. This article is posted here by permission of Marine Biological Laboratory for personal use, not for redistribution. The definitive version was published in Biological Bulletin 206 (2004): 1-3.Recent investigations of sensory and behavioral cues that initiate sexual selection processes in the squid Loligo pealeii have determined that egg capsules deposited on the substrate provide a strong visual and chemotactile stimulus to males, even in the absence of females (1, 2, 3). The visual stimulus of egg capsules attracts males to the eggs, and when the males touch the eggs, they encounter a chemical stimulus that leads to highly aggressive fighting behavior. We have recently demonstrated that egg capsule extracts implanted in artificial egg capsules elicit this aggressive behavior (4). In this communication, we present evidence that the salient chemical factor originates in the ovary and perhaps the oviducal gland of the female reproductive tract

Back-gated Nb-doped MoS2 junctionless field-effect-transistors

Electrical measurements were carried out to measure the performance and evaluate the characteristics of MoS2 flakes doped with Niobium (Nb). The flakes were obtained by mechanical exfoliation and transferred onto 85 nm thick SiO2 oxide and a highly doped Si handle wafer. Ti/Au (5/45 nm) deposited on top of the flake allowed the realization of a back-gate structure, which was analyzed structurally through Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). To best of our knowledge this is the first cross-sectional TEM study of exfoliated Nb-doped MoS2 flakes. In fact to date TEM of transition-metal-dichalcogenide flakes is extremely rare in the literature, considering the recent body of work. The devices were then electrically characterized by temperature dependent Ids versus Vds and Ids versus Vbg curves. The temperature dependency of the device shows a semiconductor behavior and, the doping effect by Nb atoms introduces acceptors in the structure, with a p-type concentration 4.3 × 1019 cm−3 measured by Hall effect. The p-type doping is confirmed by all the electrical measurements, making the structure a junctionless transistor. In addition, other parameters regarding the contact resistance between the top metal and MoS2 are extracted thanks to a simple Transfer Length Method (TLM) structure, showing a promising contact resistivity of 1.05 × 10−7 Ω/cm2 and a sheet resistance of 2.36 × 102 Ω/sq

Air sensitivity of MoS2, MoSe2, MoTe2, HfS2 and HfSe2

A surface sensitivity study was performed on different transition-metal dichalcogenides (TMDs) under ambient conditions in order to understand which material is the most suitable for future device applications. Initially, Atomic Force Microscopy and Scanning Electron Microscopy studies were carried out over a period of 27 days on mechanically exfoliated flakes of 5 different TMDs, namely, MoS2, MoSe2, MoTe2, HfS2, and HfSe2. The most reactive were MoTe2 and HfSe2. HfSe2, in particular, showed surface protrusions after ambient exposure, reaching a height and width of approximately 60 nm after a single day. This study was later supplemented by Transmission Electron Microscopy (TEM) cross-sectional analysis, which showed hemispherical-shaped surface blisters that are amorphous in nature, approximately 180–240 nm tall and 420–540 nm wide, after 5 months of air exposure, as well as surface deformation in regions between these structures, related to surface oxidation. An X-ray photoelectron spectroscopy study of atmosphere exposed HfSe2 was conducted over various time scales, which indicated that the Hf undergoes a preferential reaction with oxygen as compared to the Se. Energy-Dispersive X-Ray Spectroscopy showed that the blisters are Se-rich; thus, it is theorised that HfO2 forms when the HfSe2 reacts in ambient, which in turn causes the Se atoms to be aggregated at the surface in the form of blisters. Overall, it is evident that air contact drastically affects the structural properties of TMD materials. This issue poses one of the biggest challenges for future TMD-based devices and technologies

Le FORUM, Vol. 37 No. 1

https://digitalcommons.library.umaine.edu/francoamericain_forum/1036/thumbnail.jp

Back-gated Nb-doped MoS2 junctionless field-effect-transistors

Electrical measurements were carried out to measure the performance and evaluate the characteristics of MoS2 flakes doped with Niobium (Nb). The flakes were obtained by mechanical exfoliation and transferred onto 85 nm thick SiO2 oxide and a highly doped Si handle wafer. Ti/Au (5/45 nm) deposited on top of the flake allowed the realization of a back-gate structure, which was analyzed structurally through Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). To best of our knowledge this is the first cross-sectional TEM study of exfoliated Nb-doped MoS2 flakes. In fact to date TEM of transition-metal-dichalcogenide flakes is extremely rare in the literature, considering the recent body of work. The devices were then electrically characterized by temperature dependent Ids versus Vds and Ids versus Vbg curves. The temperature dependency of the device shows a semiconductor behavior and, the doping effect by Nb atoms introduces acceptors in the structure, with a p-type concentration 4.3 × 1019 cm−3 measured by Hall effect. The p-type doping is confirmed by all the electrical measurements, making the structure a junctionless transistor. In addition, other parameters regarding the contact resistance between the top metal and MoS2 are extracted thanks to a simple Transfer Length Method (TLM) structure, showing a promising contact resistivity of 1.05 × 10−7 Ω/cm2 and a sheet resistance of 2.36 × 102 Ω/sq

Structural and electronic properties of polycrystalline InAs thin films deposited on silicon dioxide and glass at temperatures below 500 °c

Polycrystalline indium arsenide (poly InAs) thin films grown at 475 °C by metal organic vapor phase epitaxy (MOVPE) are explored as possible candidates for low-temperature-grown semiconducting materials. Structural and transport properties of the films are reported, with electron mobilities of ~100 cm2/V·s achieved at room temperature, and values reaching 155 cm2/V·s for a heterostructure including the polycrystalline InAs film. Test structures fabricated with an aluminum oxide (Al2O3) top-gate dielectric show that transistor-type behavior is possible when poly InAs films are implemented as the channel material, with maximum ION/IOFF > 250 achieved at −50 °C and ION/IOFF = 90 at room temperature. Factors limiting the ION/IOFF ratio are investigated and recommendations are made for future implementation of this material

Quantum confinement-induced semimetal-to-semiconductor evolution in large-area ultra-thin PtSe2 films grown at 400 °C

In this work, we present a comprehensive theoretical and experimental study of quantum confinement in layered platinum diselenide (PtSe2) films as a function of film thickness. Our electrical measurements, in combination with density functional theory calculations, show distinct layer-dependent semimetal-to-semiconductor evolution in PtSe2 films, and highlight the importance of including van der Waals interactions, Green’s function calibration, and screened Coulomb interactions in the determination of the thickness-dependent PtSe2 energy gap. Large-area PtSe2 films of varying thickness (2.5–6.5 nm) were formed at 400 °C by thermally assisted conversion of ultra-thin platinum films on Si/SiO2 substrates. The PtSe2 films exhibit p-type semiconducting behavior with hole mobility values up to 13 cm2/V·s. Metal-oxide-semiconductor field-effect transistors have been fabricated using the grown PtSe2 films and a gate field-controlled switching performance with an ION/IOFF ratio of >230 has been measured at room temperature for a 2.5–3 nm PtSe2 film, while the ratio drops to <2 for 5–6.5 nm-thick PtSe2 films, consistent with a semiconducting-to-semimetallic transition with increasing PtSe2 film thickness. These experimental observations indicate that the low-temperature growth of semimetallic or semiconducting PtSe2 could be integrated into the back-end-of-line of a silicon complementary metal-oxide-semiconductor process