A Combined Spectrophotometer and Fluorometer to Demonstrate the Principles of Absorption Spectroscopy

A dual-function student-crafted instrument is described as part of a laboratory activity aimed to teach both the principles and practical aspects of absorption spectroscopy to secondary and introductory undergraduate students. Using minimal changes in an arrangement that is based on interlocking bricks and low-cost components, both a fluorometer and photometer have been constructed. The former demonstrates the principles of the Beer–Lambert law visually and quantitatively by acquiring the spatial light attenuation through a fluorescent sample. The latter then demonstrates its practical application in a visible-light spectrometer by measuring the absorption spectrum of an aqueous permanganate solution

Formation of hot tear under controlled solidification conditions

Aluminum alloy 7050 is known for its superior mechanical properties, and thus finds its application in aerospace industry. Vertical direct-chill (DC) casting process is typically employed for producing such an alloy. Despite its advantages, AA7050 is considered as a "hard-to-cast" alloy because of its propensity to cold cracking. This type of cracks occurs catastrophically and is difficult to predict. Previous research suggested that such a crack could be initiated by undeveloped hot tears (microscopic hot tear) formed during the DC casting process if they reach a certain critical size. However, validation of such a hypothesis has not been done yet. Therefore, a method to produce a hot tear with a controlled size is needed as part of the verification studies. In the current study, we demonstrate a method that has a potential to control the size of the created hot tear in a small-scale solidification process. We found that by changing two variables, cooling rate and displacement compensation rate, the size of the hot tear during solidification can be modified in a controlled way. An X-ray microtomography characterization technique is utilized to quantify the created hot tear. We suggest that feeding and strain rate during DC casting are more important compared with the exerted force on the sample for the formation of a hot tear. In addition, we show that there are four different domains of hot-tear development in the explored experimental window-compression, microscopic hot tear, macroscopic hot tear, and failure. The samples produced in the current study will be used for subsequent experiments that simulate cold-cracking conditions to confirm the earlier proposed model.This research was carried out within the Materials innovation institute (www.m2i.nl) research framework, project no. M42.5.09340

Jaw claudication and jaw stiffness in giant cell arteritis: secondary analysis of a qualitative research dataset

Objective Jaw symptoms can be a vital clue to the diagnosis of GCA. Guidelines recommend more intensive treatment if jaw claudication is present. We sought to explore how patients with GCA described their jaw symptoms. Methods We carried out a secondary, qualitative analysis of interview data from 36 participants from the UK (n = 25) and Australia (n = 11), originally collected in order to develop a patient-reported outcome measure for GCA. In all cases, GCA had been confirmed by biopsy/imaging. Interview transcripts were organized within QSR NVivo 12 software and analysed using template analysis. Themes were refined through discussion among the research team, including a patient partner. Results Twenty of 36 participants reported jaw symptoms associated with GCA. The median age of these 20 participants was 76.5 years; 60% were female. Five themes were identified: physical sensations; impact on function; impact on diet; symptom response with CSs; and attribution to other causes. Physical sensations included ache, cramp, stiffness and ‘lockjaw’. Functional impacts included difficulty in eating/chewing, cleaning teeth, speaking or opening the mouth. Dietary impacts included switching to softer food. Response to CSs was not always immediate. Jaw symptoms were initially mis-attributed by some participants to arthritis, age or viral illnesses; or by health-care professionals to a dental cavity, ear infection or teeth-grinding. Conclusion Jaw symptoms in GCA are diverse and can lead to diagnostic confusion with primary temporomandibular joint disorder, potentially contributing to delay in GCA diagnosis. Further research is needed to determine the relationship of jaw stiffness to jaw claudication

Glacier thinning, recession and advance, and the associated evolution of a glacial lake between 1966 and 2021 at Austerdalsbreen, western Norway

The Jostedalsbreen is the largest ice cap in Norway and mainland Europe. Rapid retreat of many of its outlet glaciers since the 2000s has led to the formation of several glacial lakes. Processes causing the formation and expansion of glacial lakes and their interaction with a glacier and terminal moraine have not been widely addressed yet. In this study, we investigate the degradation of the front of the southeast-facing outlet glacier Austerdalsbreen. Based on a variety of remotely sensed data (UAV-based and airborne orthophotos and DEMs, satellite images), we analyze the coincident glacial and proglacial changes of Austerdalsbreen and quantify the evolution of this transition zone during the last decades. In particular, we focus on the short-term evolution of the glacial lake since 2010, we examine the context of a glacier advance in the 1990s, and we report long-term changes by utilizing 1960s imagery. We discuss the evolution and conditions of Austerdalsbreen compared to other outlet glaciers of Jostedalsbreen. Overall, the glacier terminus has experienced a recession in the last decades. The 1990s terminus advance was more restricted than at other nearby outlet glaciers due to glacier surface debris cover, which is a critical factor for the glacier and lake evolution. However, in the most recent period, since 2012, a distinct expansion of a glacial lake is quantifiable. Since the rates of glacier surface lowering also considerably increased since approximately 2017 and the glacier retreated since the beginning of the 2000s with a clear maximum length decrease in 2015, we interpret the recently formed glacial lake as a contributory factor of glacial changes

Action Recognition with a Bio--Inspired Feedforward Motion Processing Model: The Richness of Center-Surround Interactions

International audienceHere we show that reproducing the functional properties of MT cells with various center--surround interactions enriches motion representation and improves the action recognition performance. To do so, we propose a simplified bio--inspired model of the motion pathway in primates: It is a feedforward model restricted to V1-MT cortical layers, cortical cells cover the visual space with a foveated structure, and more importantly, we reproduce some of the richness of center-surround interactions of MT cells. Interestingly, as observed in neurophysiology, our MT cells not only behave like simple velocity detectors, but also respond to several kinds of motion contrasts. Results show that this diversity of motion representation at the MT level is a major advantage for an action recognition task. Defining motion maps as our feature vectors, we used a standard classification method on the Weizmann database: We obtained an average recognition rate of 98.9%, which is superior to the recent results by Jhuang et al. (2007). These promising results encourage us to further develop bio--inspired models incorporating other brain mechanisms and cortical layers in order to deal with more complex videos

Upscaling miscanthus production in the United Kingdom: the benefits, challenges, and trade‐offs

The UK sixth carbon budget has recommended domestic biomass supply should increase to meet growing demand, planting a minimum of 30,000 hectares of perennial energy crops a year by 2035, with a view to establishing 700,000 hectares by 2050 to meet the requirements of the balanced net zero pathway. Miscanthus is a key biomass crop to scale up domestic biomass production in the United Kingdom. A cohesive land management strategy, based on robust evidence, will be required to ensure upscaling of miscanthus cultivation maximizes the environmental and economic benefits and minimizes undesirable consequences. This review examines research into available land areas, environmental impacts, barriers to uptake, and the challenges, benefits, and trade-offs required to upscale miscanthus production on arable land and grassland in the United Kingdom. Expansion of perennial biomass crops has been considered best restricted to marginal land, less suited to food production. The review identifies a trade-off between avoiding competition with food production and a risk of encroaching on areas containing high-biodiversity or high-carbon stocks, such as semi-natural grasslands. If areas of land suitable for food production are needed to produce the biomass required for emission reduction, the review indicates there are multiple strategies for miscanthus to complement long-term food security rather than compete with it. On arable land, a miscanthus rotation with a cycle length of 10–20 years can be employed as fallow period for fields experiencing yield decline, soil fatigue, or persistent weed problems. On improved grassland areas, miscanthus presents an option for diversification, flood mitigation, and water quality improvement. Strategies need to be developed to integrate miscanthus into farming systems in a way that is profitable, sensitive to local demand, climate, and geography, and complements rather than competes with food production by increasing overall farm profitability and resilience

Adapting the Marine Stewardship Council risk-based framework to estimate impacts on seabirds, marine mammals, marine turtles and sea snakes

Information available on impacts of fisheries on target or bycatch species varies greatly, requiring development of risk assessment tools to determine potentially unacceptable levels. Seabirds, marine mammals, marine turtles and sea snakes are particularly vulnerable given their extreme life histories, and data are often lacking on their populations or bycatch rates with which to quantify fisheries impacts. The Marine Stewardship Council (MSC) use a semi-quantitative Productivity Susceptibility Analysis (PSA) that is applicable to all species, target and non-target, to calculate risk of impact and to provide a score for relevant Performance Indicators for fisheries undertaking certification. The most recent MSC Fisheries Standard Review provided an opportunity to test the appropriateness of using this tool and whether it was sufficiently precautionary for seabirds, marine mammals and reptiles . The existing PSA was tested on a range of species and fisheries and reviewed in relation to literature on these species groups. New taxa-specific PSAs were produced and then reviewed by taxa-specific experts and other relevant stakeholders (e.g., assessors, fisheries managers, non-governmental conservation organizations). The conclusions of the Fishery Standard Review process were that the new taxa-specific PSAs were more appropriate than the existing PSA for assessing fisheries risk for seabirds, marine mammals and reptiles, and that, as intended, they resulted in precautionary outcomes. The taxa-specific PSAs provide useful tools for true data-deficient fisheries to assess relative risk of impact. Where some data are available, the MSC could consider developing or adapting other approaches to support robust and relevant risk assessments