2,091 research outputs found
Reducing Cannon Plug Connector Pin Selection Time and Errors through Enhanced Data Presentation Methods
The purpose of this research is to investigate the effects of data presentation methods on technician performance when the procedures are presented on a monocular, head mounted display (HMD) in a static maintenance environment. This research used two different methods to present the maintenance task data to the technicians. The first method showed the task as it is typically described in standard technical manuals. It described the task to perform and provided a basic picture of the cannon plug to be tested (unenhanced). The second method provided the same information as the first, but it also modified the information by providing visual cues as to which pins were to be selected and connected (enhanced). United States Air Force avionics maintenance technicians stationed at Barksdale Air Force Base, Louisiana were the test participants in this study. Measurements included task completion time, task error rate, and technician self reports on the HMD usability. The technicians indicated that HMDs could be a useful tool in the performance of their maintenance duties. The data collected during this study indicates that the technicians performed the tasks quicker and committed fewer errors when they used the enhanced graphical data presentation method to perform the tasks
A global data set of soil particle size properties
A standardized global data set of soil horizon thicknesses and textures (particle size distributions) was compiled. This data set will be used by the improved ground hydrology parameterization designed for the Goddard Institute for Space Studies General Circulation Model (GISS GCM) Model 3. The data set specifies the top and bottom depths and the percent abundance of sand, silt, and clay of individual soil horizons in each of the 106 soil types cataloged for nine continental divisions. When combined with the World Soil Data File, the result is a global data set of variations in physical properties throughout the soil profile. These properties are important in the determination of water storage in individual soil horizons and exchange of water with the lower atmosphere. The incorporation of this data set into the GISS GCM should improve model performance by including more realistic variability in land-surface properties
Humpback and Fin Whaling in the Gulf of Maine from 1800 to 1918
The history of whaling in the Gulf of Maine was reviewed primarily to estimate removals of humpback whales, Megaptera novaeangliae, especially during the 19th century. In the decades from 1800 to 1860, whaling effort consisted of a few localized, small-scale, shore-based enterprises on the coast of Maine and Cape Cod, Mass. Provincetown and Nantucket schooners occasionally conducted short cruises for humpback whales in New England waters. With the development of bomb-lance technology at mid century, the ease of killing humpback whales and fin whales, Balaenoptera physalus, increased. As a result, by the 1870’s there was considerable local interest in hunting rorquals (baleen whales in the family Balaenopteridae, which include the humpback and fin whales) in the Gulf of Maine. A few schooners were specially outfitted to take rorquals in the late 1870’s and 1880’s although their combined annual take was probably no more than a few tens of whales. Also in about 1880, fishing steamers began to be used to hunt whales in the Gulf of Maine. This steamer fishery grew to include about five vessels regularly engaged in whaling by the mid 1880’s but dwindled to only one vessel by the end of the decade. Fin whales constituted at least half of the catch, which exceeded 100 animals in some years. In the late 1880’s and thereafter, few whales were taken by whaling vessels in the Gulf of Maine
Recommended from our members
Predicted and measured glass surface temperatures in an industrial, regeneratively gas-fired flat glass furnace
This study reports optically measured glass surface temperatures along the furnace center-line in the combustion space of a sideport, 455 (metric) t/d industrial, gas-fired flat glass furnace. The measurements were made using a water-cooled two-color pyrometer inserted through holes in the crown at six locations along the length of the furnace. Both average and time-resolved glass surface temperature measurements were performed during the approximately 20 s reversal period of the furnace. The measured glass surface temperature data are supplemented by observations of the batch location using a specially designed, water-cooled video probe. The average temperatures were found to rise from a low near 1700 Κ near the batch blanket to a peak of approximately 1900 K, then drop to a level of 1800 K. Evidence of batch Islands or "logs" is observed in the surface temperature data collected at the measurement location nearest the batch blanket. Large temperature excursions are seen here, indicative of measurement alternately of both the batch surface and the molten glass. Also reported in this study are results of a numerical model for the three-dimensional melt flow and heat transfer in the tank, coupled with a batch melting model. The radiant heat flux distribution incident on the melt and batch blanket surfaces is assumed. The melt tank model includes bubbling. The numerical predictions agree well with the timeaveraged glass surface temperature data collected experimentally The measurements and model predictions illustrate the complex transport phenomena in the melting section of the furnace
Sixteen years of Collaborative Learning through Active Sense-making in Physics (CLASP) at UC Davis
This paper describes our large reformed introductory physics course at UC
Davis, which bioscience students have been taking since 1996. The central
feature of this course is a focus on sense-making by the students during the
five hours per week discussion/labs in which the students take part in
activities emphasizing peer-peer discussions, argumentation, and presentations
of ideas. The course differs in many fundamental ways from traditionally taught
introductory physics courses. After discussing the unique features of CLASP and
its implementation at UC Davis, various student outcome measures are presented
showing increased performance by students who took the CLASP course compared to
students who took a traditionally taught introductory physics course. Measures
we use include upper-division GPAs, MCAT scores, FCI gains, and MPEX-II scores.Comment: Also submitted to American Journal of Physic
Uncovering perceived identification accuracy of in-vehicle biometric sensing
Biometric techniques can help make vehicles safer to drive, authenticate users, and provide personalized in-car experiences. However, it is unclear to what extent users are willing to trade their personal biometric data for such benefits. In this early work, we conducted an open card sorting study (N=11) to better understand how well users perceive their physical, behavioral and physiological features can personally identify them. Findings showed that on average participants clustere
Spatial variation in the fine-structure constant -- new results from VLT/UVES
(abridged) We present a new analysis of a large sample of quasar
absorption-line spectra obtained using UVES (the Ultraviolet and Visual Echelle
Spectrograph) on the VLT (Very Large Telescope) in Chile. In the VLT sample
(154 absorbers), we find evidence that alpha increases with increasing
cosmological distance from Earth. However, as previously shown, the Keck sample
(141 absorbers) provided evidence for a smaller alpha in the distant absorption
clouds. Upon combining the samples an apparent variation of alpha across the
sky emerges which is well represented by an angular dipole model pointing in
the direction RA=(17.3 +/- 1.0) hr, dec. = (-61 +/- 10) deg, with amplitude
(0.97 +0.22/-0.20) x 10^(-5). The dipole model is required at the 4.1 sigma
statistical significance level over a simple monopole model where alpha is the
same across the sky (but possibly different to the current laboratory value).
The data sets reveal a number of remarkable consistencies: various data cuts
are consistent and there is consistency in the overlap region of the Keck and
VLT samples. Assuming a dipole-only (i.e. no-monopole) model whose amplitude
grows proportionally with `lookback-time distance' (r=ct, where t is the
lookback time), the amplitude is (1.1 +/- 0.2) x 10^(-6) GLyr^(-1) and the
model is significant at the 4.2 sigma confidence level over the null model
[Delta alpha]/alpha = 0). We apply robustness checks and demonstrate that the
dipole effect does not originate from a small subset of the absorbers or
spectra. We present an analysis of systematic effects, and are unable to
identify any single systematic effect which can emulate the observed variation
in alpha.Comment: 47 pages, 35 figures. Accepted for publication by Monthly Notices of
the Royal Astronomical Society. Please see
http://astronomy.swin.edu.au/~mmurphy/pub.html for an ASCII version of table
A1 and the full set of Voigt profile fits for appendix
Transcatheter Closure of Paravalvular Defects Using a Purpose-Specific Occluder
ObjectivesThis study sought to describe a method of paravalvular leak closure using a purpose-specific occlusion device.BackgroundTranscatheter closure of paravalvular leaks has been hampered by technical challenges, the limitations of available imaging modalities, and the lack of closure devices specifically designed for this purpose.MethodsPatients with severe symptomatic paravalvular regurgitation at high risk for repeat surgery underwent transcatheter leak closure. Both left ventricular puncture and retrograde transfemoral approaches were used with fluoroscopic and 3-dimensional transesophageal guidance. A purpose-specific occluder (Vascular Plug III, AGA Medical Corp., Plymouth, Minnesota) was used.ResultsFive patients with severe prosthetic mitral and aortic paravalvular leaks underwent attempted closure. Implantation of the device was successfully accomplished in all. In 1 patient, the plug interfered with closure of a mechanical valve leaflet and was removed and replaced with an alternate device. Complications included pericardial bleeding in 2 patients with a transapical approach. There was no procedural mortality. At a median follow-up of 191 days (interquartile range [IQR] 169 to 203 days) all patients were alive. New York Heart Association functional class fell from 4 (IQR 3 to 4) to 2 (IQR 2 to 3), hemoglobin rose from 89 g/l (IQR 87 to 108 g/l) to 115 g/l (IQR 104 to 118 g/l), creatinine fell from 109 μmol/l (IQR 106 to 132 μmol/l) to 89 μmol/l (IQR 89 to 126 μmol/l). Median echocardiographic follow-up at 58 days (IQR 56 to 70 days) reported residual regurgitation to be reduced from grade 4 to grade 2 (IQR 1.5 to 2.25).ConclusionsClosure of mitral and aortic prosthetic paravalvular leaks with the Vascular Plug III using either a transapical (mitral) or a retrograde (aortic) approach appears promising
Traffic-Related Air Pollution and All-Cause Mortality during Tuberculosis Treatment in California.
BackgroundAmbient air pollution and tuberculosis (TB) have an impact on public health worldwide, yet associations between the two remain uncertain.ObjectiveWe determined the impact of residential traffic on mortality during treatment of active TB.MethodsFrom 2000-2012, we enrolled 32,875 patients in California with active TB and followed them throughout treatment. We obtained patient data from the California Tuberculosis Registry and calculated traffic volumes and traffic densities in 100- to 400-m radius buffers around residential addresses. We used Cox models to determine mortality hazard ratios, controlling for demographic, socioeconomic, and clinical potential confounders. We categorized traffic exposures as quintiles and determined trends using Wald tests.ResultsParticipants contributed 22,576 person-years at risk. There were 2,305 deaths during treatment for a crude mortality rate of 1,021 deaths per 10,000 person-years. Traffic volumes and traffic densities in all buffers around patient residences were associated with increased mortality during TB treatment, although the findings were not statistically significant in all buffers. As the buffer size decreased, fifth-quintile mortality hazards increased, and trends across quintiles of traffic exposure became more statistically significant. Increasing quintiles of nearest-road traffic volumes in the 100-m buffer were associated with 3%, 14%, 19%, and 28% increased risk of death during TB treatment [first quintile, referent; second quintile hazard ratio (HR)=1.03 [95% confidence interval (CI): 0.86, 1.25]; third quintile HR=1.14 (95% CI: 0.95, 1.37); fourth quintile HR=1.19 (95% CI: 0.99, 1.43); fifth quintile HR=1.28 (95% CI: 1.07, 1.53), respectively; p-trend=0.002].ConclusionsResidential proximity to road traffic volumes and traffic density were associated with increased all-cause mortality in patients undergoing treatment for active tuberculosis even after adjusting for multiple demographic, socioeconomic, and clinical factors, suggesting that TB patients are susceptible to the adverse health effects of traffic-related air pollution. https://doi.org/10.1289/EHP1699
- …