Design methodology and computational fluid dynamics of the impeller and volute of a centrifugal compressor

This project deals with the 3D design of an impeller and an external volute for a centrifugal compressor through the combination of 2 compatible methodologies. To achieve a successful design, thermodynamic and geometric parameters were computed. Besides, a CFD analysis was carried out to determine the performance curves, which show that the calculations precisely represent the reality because the relative error between the calculation and the simulations output parameter was 3.26% for the efficiency, 3.31% for the outlet temperature, 13% for the total pressure outlet and 7.14% for the outlet static pressure. A validation of the simulation methodology was carried out by replicating the results of the investigation presented by Mojaddam, obtaining an error percentage of 11.69% for the total pressure ratio and a 3.89% of error for the isentropic efficiency.En este artículo se presenta el diseño 3D del impulsor y voluta externa de un compresor centrífugo de una etapa mediante la combinación de 2 metodologías de diseño compatibles entre sí, calculando los parámetros termodinámicos y componentes geométricos respectivos. Además, se describe el proceso de obtención de las curvas de desempeño de un compresor mediante un análisis CFD de los componentes mencionados. Dichas curvas fueron comparadas con datos experimentales, con porcentajes de error entre los datos calculados y simulados de 3.26% para la eficiencia, 3.31% para la temperatura de salida, 13% para la presión total de salida y 7.14% para la presión estática de salida. La metodología de simulación fue validada al replicar los resultados de la investigación presentada por Mojaddam M., obteniendo porcentajes de error de 11.69% para la relación de presiones y 3.89% para las eficiencias isentrópicas

The Research Journey as a Challenge Towards New Trends

The academic community of the department of Risaralda, in its permanent interest in evidencing the results of the research processes that are carried out from the Higher Education Institutions and as a product of the VI meeting of researchers of the department of Risaralda held in November 2021 presents its work: “The journey of research as a challenge towards new trends”, which reflects the result of the latest research and advances in different lines of knowledge in Agricultural Sciences, Health Sciences, Social Sciences and Technology and Information Sciences, which seek to solve and meet the demands of the different sectors. This work would not have been possible without the help of each of the teachers, researchers and authors who presented their articles that make up each of the chapters of the book, to them our gratitude for their commitment, dedication and commitment, since their sole purpose is to contribute from the academy and science to scientific and technological development in the search for the solution of problems and thus contribute to transform the reality of our society and communities. We also wish to extend our gratitude to the institutions of the Network that made this publication possible: UTP, UCP, UNAD, UNIREMINGTON; UNISARC, CIAF, Universidad Libre, Uniclaretiana, Fundación Universitaria Comfamiliar and UNIMINUTO, institutions that in one way or another allowed this work to become a reality, which we hope will be of interest to you.Preface............................................................................................................................7 Chapter 1. Technologies and Engineering Towards a humanization in Engineering using soft skills in training in Engineers.............................................................................................................11 Omar Iván Trejos Buriticá1, Luis Eduardo Muñoz Guerrero Innovative materials in construction: review from a bibliometric analysis....................................................................................................................27 Cristian Osorio Gómez, Daniel Aristizábal Torres, Alejandro Alzate Buitrago, Cristhian Camilo Amariles López Bibliometric review of disaster risk management: progress, trends, and challenges.........................................................................................................51 Alejandro Alzate Buitrago, Gloria Milena Molina Vinasco. Incidence of land coverage and geology, in the unstability of lands of the micro-basin of the Combia creek, Pereira, Risaralda....................................73 Alejandro Alzate Buitrago, Daniel Aristizábal Torres. Chapter 2. Arts, Humanities, and Social Sciences Training experience with teachers teaching mathematics using the inquiry methodology ...............................................................................................95 Vivian Libeth Uzuriaga López, Héctor Gerardo Sánchez Bedoya. Interpretation of the multiple representations of the fears associated to the boarding of limited visual patients in the elective I students’ written productions and low vision ...................................................................................113 Eliana Bermúdez Cardona, Ana María Agudelo Guevara, Caterine Villamarín Acosta. The relevance of local knowledge in social sciences............................................131 Alberto Antonio Berón Ospina, Isabel Cristina Castillo Quintero. Basic education students’ conceptions of conflict a view from the peace for the education....................................................................................................143 Astrid Milena Calderón Cárdenas,Carolina Aguirre Arias, Carolina Franco Ossa, Martha Cecilia Gutiérrez Giraldo, Orfa Buitrago. Comprehensive risk prevention in educational settings: an interdisciplinary and socio-educational approach ............................................................................163 Olga María Henao Trujillo, Claudia María López Ortiz. Chapter 3. Natural and Agricultural Sciences Physicochemical characterization of three substrates used in the deep bedding system in swine .......................................................................................175 Juan Manuel Sánchez Rubio, Andrés Felipe Arias Roldan, Jesús Arturo Rincón Sanz, Jaime Andrés Betancourt Vásquez. Periodic solutions in AFM models........................................................................187 Daniel Cortés Zapata, Alexander Gutiérrez Gutiérrez. Phenology in flower and fruit of Rubus glaucus benth. Cv. Thornless in Risaralda: elements for phytosanitary management .........................................199 Shirley Palacios Castro, Andrés Alfonso Patiño Martínez, James Montoya Lerma, Ricardo Flórez, Harry Josué Pérez. Socio-economic and technical characterization of the cultivation of avocado (Persea americana) in Risaralda..............................................................217 Andrés Alfonso Patiño Martínez, Kelly Saudith Castañez Poveda, Eliana Gómez Correa. Biosecurity management in backyard systems in Santa Rosa de Cabal, Risaralda................................................................................................................227 Julia Victoria Arredondo Botero, Jaiver Estiben Ocampo Jaramillo, Juan Sebastián Mera Vallejo, Álvaro de Jesús Aranzazu Hernández. CONTENTS Physical-chemical diagnosis of soils in hillside areas with predominance of Lulo CV. La Selva production system in the department of Risaralda.............241 Adriana Patricia Restrepo Gallón, María Paula Landinez Montes, Jimena Tobón López. Digestibility of three concentrates used in canine feeding....................................271 María Fernanda Mejía Silva, Valentina Noreña Sánchez, Gastón Adolfo Castaño Jiménez. Chapter 4. Economic, Administrative, and Accounting Sciences Financial inclusion in households from socioeconomic strata 1 and 2 in the city of Pereira ..................................................................................................285 Lindy Neth Perea Mosquera, Marlen Isabel Redondo Ramírez, Angélica Viviana Morales. Internal marketing strategies as a competitive advantage for the company Mobilautos SAS de Dosquebradas........................................................................303 Inés Montoya Sánchez, Sandra Patricia Viana Bolaños, Ana María Barrera Rodríguez. Uses of tourist marketing in the tourist sector of the municipality of Belén de Umbría, Risaralda.............................................................................................319 Ana María Barrera Rodríguez, Paola Andrea Echeverri Gutiérrez, María Camila Parra Buitrago, Paola Andrea Martín Muñoz, Angy Paola Ángel Vélez, Luisa Natalia Trejos Ospina. Territorial prospective of Risaralda department (Colombia), based on the SDGS...............................................................................................................333 Juan Guillermo Gil García, Samanta Londoño Velásquez. Chapter 5. Health and Sports Sciences Performance evaluation in times of pandemic. What do medical students think?.......................................................................................................353 Samuel Eduardo Trujillo Henao, Rodolfo A. Cabrales Vega, Germán Alberto Moreno Gómez. The relevance of the therapist’s self and self-reference in the training of psychologists.....................................................................................................371 Maria Paula Marmolejo Lozano, Mireya Ospina Botero. Habits related to oral health which influence lifestyle of elder people in a wellness center for the elderly in Pereira 2020. .............................................387 Isadora Blanco Pérez, Olga Patricia Ramírez Rodríguez, Ángela María Rincón Hurtado. Analysis of the suicide trend in the Coffee Region in Colombia during the years 2012-2018 ..............................................................................................405 Germán Alberto Moreno Gómez, Jennifer Nessim Salazar, Jairo Franco Londoño, Juan Carlos Medina Osorio. Hind limb long bone fractures in canines and felines...........................................419 María Camila Cruz Vélez, Valentina Herrera Morales, Alba Nydia Restrepo Jiménez, Lina Marcela Palomino, Gabriel Rodolfo Izquierdo Bravo. Prevalence of overweight and obesity in children in the rural and urban area of Risaralda....................................................................................................439 Angela María Álvarez López, Angela Liceth Pérez Rendón, Alejandro Gómez Rodas, Luis Enrique Isaza Velásquez. Chapter 6. Architecture, Design and Advertising The artisan crafts of Risaralda, characteristics, importance, and risks within the Colombian Coffee Cultural Landscape, CCCL....................................457 Yaffa Nahir Ivette Gómez Barrera, Javier Alfonso López Morales

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Monitoreo de material particulado en vías de Manizales: Estudio piloto

Manizales has an air quality network which measure particulate matter (PM) in ambient air concentrations. However, this monitoring system does not have information of pollutant concentrations in the vicinity of roads. The objective of this study was to determine the concentration of the fine parti-culate matter (PM2.5) and black carbon (BC) near main roads of Manizales. The evaluation considered micro-environments related with pedestrians of roads and passengers of public transport buses. PM2.5 and BC concen-trations were measured during two weeks for periods of five hours per day in the morning. The instruments used were two DustTrack photometers (model 8533) and a Microethalometer model AE51. The data were analyzed according to each micro-environment and three different zones of the city. The median values of PM2.5 and BC concentrations were 10 % and 30 % lower in the eastern zone than in the center zone, showing the impact of vehicular emissions in ambient air concentrations. In public transport buses, the median of PM2.5 and BC concentrations were 57 % and 54 % higher than those obtained near roads. In terms of inside the public trans-port buses micro-environment, the contribution of BC was approximately 41 % of the total PM concentrations. This is the first study performed in Manizales in which concentrations of fine particles and BC near roads and public transport (pedestrians and passengers) were evaluated. These types of studies are important for adding new information for air quality management in the city and for complementing the official air quality monitoring.Manizales cuenta actualmente con un sistema de vigilancia de calidad del aire que mide concentraciones en aire ambiente de material particulado (PM, por sus siglas en inglés). Sin embargo, este sistema no permite conocer concentraciones de exposición en inmediaciones de vías. El ob-jetivo de este estudio fue realizar una primera aproximación a los niveles de exposición a material particulado fino (PM2.5) y carbono negro (BC) en algunas vías de la ciudad de Manizales, evaluando microambientes relacionados con los peatones en vías y como pasajeros de buses del transporte público. Se midieron concentraciones de material particulado fino PM2.5 y BC durante dos semanas por periodos de cinco horas al día en horas de la mañana. Se usaron dos fotómetros DustTrack modelos 8533 y un Microaetalómetro modelo AE51. Los datos fueron evaluados en función de cada microambiente y tres zonas de estudio en la ciudad.  El valor obtenido de la mediana para las concentraciones de PM2.5 y BC en las vías analizadas, fue 10 % y 30 % menor en la zona oriente respecto al sector centro, indicando la relevancia del tráfico vehicular como fuente de emisión en la ciudad. Para el caso de los pasajeros de transporte público, las concentraciones expresadas como la mediana de PM2.5 y BC fueron 57 % y 54 % mayores comparadas con los peatones de las vías. Al interior del transporte público el porcentaje de aporte de BC fue aproximadamente del 41 % de la concentración total de PM registrado. Este es el primer estudio sobre exposición a estos contaminantes en Manizales; planteando la necesidad de seguir fortaleciendo análisis similares y usar los resultados como complemento para la gestión de calidad del aire en la ciudad

XVII International Congress of Control Electronics and Telecommunications: "Advanced Science, Technology and Innovation to move towards a new socio-technical system: Sustainable Social Transformation"

Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of batsContent: Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of bat

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

International audienceDUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

International audienceDUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

International audienceDUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

International audienceDUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals