34 research outputs found
Study of Anaerobic Membrane Bioreactor (AnMBR) with enzyme Efficiency in treatment of synthetic industrial wastewater containing 2,4-Dichlorophenol
In-situ electro-generation and activation of hydrogen peroxide using a CuFeNLDH-CNTs modified graphite cathode for degradation of cefazolin
The modified multifunctional electrodes for electro-Fenton (EF) process are suggested to be promising cathodes for in situ electro-generation and activation of H2O2 to produce hydroxyl radicals ((OH)-O-center dot). However, heterogeneous EF process still faces the challenges of limited catalytic activity and releasing of massive amounts of transition metals to the solution after removal of organic pollutants. The main aim of the present investigation was to prepare a cathode containing carbon nanotubes (CNTs) and CuFe nano-layered double hydroxide (NLDH) for degradation and mineralization of cefazolin antibiotic through electro-Fenton process. Structural and electrochemical analyses demonstrated that CuFeNLDH-CNTs nanocomposite was successfully incorporated on the surface of graphite cathode. Due to the increased formation of (OH)-O-center dot in the reactor, the incorporation of CNTs into NLDH matrix with a catalyst loading of 0.1 g substantially improved the degradation efficiency of cefazolin (89.9%) in comparison with CNTs-coated (28.7%) and bare graphite cathode (22.8%) within 100 mM. In the presence of 15 mM of ethanol, the degradation efficiency of cefazolin was remarkably decreased to 43.7% by the process, indicating the major role of (OH)-O-center dot in the destruction of target molecules. Acidic conditions favored the degradation efficiency of cefazolin by the modified EF process. Mineralization efficiency of the bio-refractory compound was obtained to be 70.1% in terms of chemical oxygen demand (COD) analysis after 300 min. The gas chromatography-mass spectroscopy (GC-MS) analysis was also implemented to identify the intermediate byproducts generated during the degradation of cefazolin in the CuFeNLDH-CNTs/EF reactor.Peer reviewe
The global, regional, and national burden of adult lip, oral, and pharyngeal cancer in 204 countries and territories:A systematic analysis for the Global Burden of Disease Study 2019
Importance Lip, oral, and pharyngeal cancers are important contributors to cancer burden worldwide, and a comprehensive evaluation of their burden globally, regionally, and nationally is crucial for effective policy planning.Objective To analyze the total and risk-attributable burden of lip and oral cavity cancer (LOC) and other pharyngeal cancer (OPC) for 204 countries and territories and by Socio-demographic Index (SDI) using 2019 Global Burden of Diseases, Injuries, and Risk Factors (GBD) Study estimates.Evidence Review The incidence, mortality, and disability-adjusted life years (DALYs) due to LOC and OPC from 1990 to 2019 were estimated using GBD 2019 methods. The GBD 2019 comparative risk assessment framework was used to estimate the proportion of deaths and DALYs for LOC and OPC attributable to smoking, tobacco, and alcohol consumption in 2019.Findings In 2019, 370 000 (95% uncertainty interval [UI], 338 000-401 000) cases and 199 000 (95% UI, 181 000-217 000) deaths for LOC and 167 000 (95% UI, 153 000-180 000) cases and 114 000 (95% UI, 103 000-126 000) deaths for OPC were estimated to occur globally, contributing 5.5 million (95% UI, 5.0-6.0 million) and 3.2 million (95% UI, 2.9-3.6 million) DALYs, respectively. From 1990 to 2019, low-middle and low SDI regions consistently showed the highest age-standardized mortality rates due to LOC and OPC, while the high SDI strata exhibited age-standardized incidence rates decreasing for LOC and increasing for OPC. Globally in 2019, smoking had the greatest contribution to risk-attributable OPC deaths for both sexes (55.8% [95% UI, 49.2%-62.0%] of all OPC deaths in male individuals and 17.4% [95% UI, 13.8%-21.2%] of all OPC deaths in female individuals). Smoking and alcohol both contributed to substantial LOC deaths globally among male individuals (42.3% [95% UI, 35.2%-48.6%] and 40.2% [95% UI, 33.3%-46.8%] of all risk-attributable cancer deaths, respectively), while chewing tobacco contributed to the greatest attributable LOC deaths among female individuals (27.6% [95% UI, 21.5%-33.8%]), driven by high risk-attributable burden in South and Southeast Asia.Conclusions and Relevance In this systematic analysis, disparities in LOC and OPC burden existed across the SDI spectrum, and a considerable percentage of burden was attributable to tobacco and alcohol use. These estimates can contribute to an understanding of the distribution and disparities in LOC and OPC burden globally and support cancer control planning efforts
The global burden of cancer attributable to risk factors, 2010-19 : a systematic analysis for the Global Burden of Disease Study 2019
Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.Peer reviewe
Sono-assisted adsorption of a textile dye on milk vetch-derived charcoal supported by silica nanopowder
Cd(II) Adsorption Using Waste Sludge from a Municipal Wastewater Treatment System
In this study, dried waste activated sludge from a municipal wastewater treatment plant was used for Cd (II) ion adsorption with and without pre-treatment. Waste activated sludge was treated with 1% Hydrogen peroxide. Cd (II) adsorption was investigated at an initial Cd(II) concentration of 50 mgL−1 with an adsorbent particle size of 50-70 mesh in erlenmeyer flasks used as batch reactors. The pseudo-first and pseudo-second order kinetic models were used to determine the correlation among the experimental data. The results showed that pretreatment of waste sludge with H2O2 increased equilibrium adsorption capacity. The equilibrium adsorption capacity values obtained for waste activated sludge with and without pretreatment were 39.84 and 20.2 mgg−1, respectively, which increased with increasing solution pH.  The correlation coefficients obtained for pseudo-first (R2>0.87) and pseudo -second (R2>0.96) order kinetic models showed that the latter model better described the experimental data on both types of treated and untreated activated sludge than the latter
A comparison of Photocatalytic silica-zinc oxide and zinc Oxide processes for the removal of dye and COD in the synthetic wastewater
Background : One of the major disadvantages of zinc oxide in aqueous solution is the light unstability of this catalyst due to the light corrosion which causes substantial reduction of photocatalytic activity of zinc oxide and application of it for environment purification. In this study, the performance of photocatalytic of UV/Silica-ZnO was compared in dye and COD removal by UV/ZnO. Materials and Methods: This study was conducted in the lab scale. The various percentages of silica nanoparticles in the combination of zinc oxides nanoparticles were fixed onto the glass by UV/Silica-ZnO process and were examined at optimum condition in the UV/ZnO process. XRD patterns of zinc oxide nanoparticles alone and accomplished by silica were conducted. Results: X-ray diffraction, confirm that there is no impurity in nanoparticles. The different percentages of silica (5, 10 and 15%) were tested in combination with zinc oxide nanoparticles. The findings showed that the value of dye and COD removal with contact time of 90 min and 10% silica loading in UV/Silica-ZnO process were 100 % and 81%, respectively and UV/ZnO process were 66% and 44% respectively. Conclusion: According to the obtained results, 10% of silica, in combination with zinc oxide nanoparticles, was the best percentage. Thus, UV/Silica-ZnO process can be used as an effective method for removing dye from textile waste waters
Effective degradation of sulfide ions and organic sulfides in cavitation-based Advanced Oxidation Processes (AOPs)
The paper presents the results of investigations on the effectiveness and reaction rate constants of the oxidation of sulfide ions and organic sulfides in real industrial effluents from the production of bitumens (2000 mg S2− L−1) using hydrodynamic and acoustic cavitation. The content of the effluents was analysed in terms carbon disulfide, dimethyl sulfide, and di-tert-butyl disulfide concentration. A possibility of complete oxidation of sulfides by cavitation alone as well as by its combination with external oxidants such as hydrogen peroxide, ozone or peroxone was demonstrated. The oxidation time for the most effective processes is as little as 15 min. Due to the presence of sulfide ions, the effluents from the production of bitumens were oxidized at a strongly alkaline pH. The results of this study reveal the advantage of performing advanced oxidation processes (AOPs) at a basic pH. The effective degradation of sulfide ions enables performance of further degradation of organic contaminants at an acidic pH, ensuring high efficiency of treatment based, for example, on the Fenton reaction without the risk of release of hydrogen sulfide to the atmosphere. The results of this research are applicable to all kinds of caustic effluents for which the lack of possibility of pH adjustment limits their efficient treatment
Feasibility of Cr (VI) Removal from Aqueous Solution Using Electrochemical Bipolar Aluminum Electrodes
Electrocoagulation is one of the technologies which have been considered by many researchers in recent years. This process has many advantages including high efficiency, no need to chemical addition, low sludge production, capability of process control, easy to operation and maintenance. Bipolar electrodes system is one of the electrocoagulation techniques which can be used for increasing the process efficiency and better distribution of the electric current. The aim of this study was to remove hexavalent chromium from aqueous solution by electrocoagulation technique. Response surface methodology (RSM) was used to optimize the parameters involving in the process, and the effect of current density, initial chromium concentration and pH on the process were investigated. At optimal conditions, for the highest chromium removal (>90%), the optimum initial chromium, reaction time, current density and pH were found to be 117 mg/L, 50 min, 11.75 mA cm-2 and 4.5, respectively. It can be stated that electrocoagulation is an efficient technique for separation and removing high chromium concentration from aqueous solutions
Synthesis of immobilised Ni-doped TiO2 nanoparticles through hydrothermal route and their efficiency evaluation in photodegradation of formaldehyde
The aim of the present study was to synthesis Ni-doped TiO2 nanoparticles (NPs) in order to evaluate their effectiveness in photocatalytic
degradation of formaldehyde in the aqueous phase. The Ni-doped
TiO2 NPs were synthesised using a mild hydrothermal method. They
were then immobilized on glass plates by the calcination method.
Characterisation of Ni-doped TiO2 NPs was also carried out using
scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The SEM images showed the uniform distribution of assynthesised NPs on the surface of glass plates, with multidimensional
crystalline structures. The results indicated that increasing the dopant
weight ratio to 0.7% enhanced the photocatalytic degradation efficiency of formaldehyde; however, a further increase in the dopant
weight ratio reduced the process efficacy. According to the results,
increasing the initial pH from acidic and neutral to alkaline conditions
decreased the efficacy of the process. Furthermore, the results showed
that increasing the amount of nanocatalyst and decreasing the initial
concentration of formaldehyde favoured the photocatalytic degradation of formaldehyde