Thermal diffusivity degradation and point defect density in self-ion implanted tungsten

Using transient grating spectroscopy (TGS) we measure the thermal diffusivity of tungsten exposed to different levels of 20 MeV self-ion irradiation. Damage as low as 3.2 × 10−4 displacements per atom (dpa) causes a measurable reduction in thermal diffusivity. Doses of 0.1 dpa and above, up to 10 dpa, give a degradation of ̴55% from the pristine value at room temperature. Using a kinetic theory model, the density of irradiation-induced point defects is estimated based on the measured changes in thermal diffusivity as a function of dose. These predictions are compared with point defect and dislocation loop densities observed in transmission electron microscopy (TEM). Molecular dynamics (MD) predictions are combined with the TEM observations to estimate the density of point defects associated with defect clusters too small to be probed by TEM. When these “invisible” defects are accounted for, the total point defect density agrees well with that estimated from TGS for a range of doses spanning 3 orders of magnitude. Kinetic theory modelling is also used to estimate the thermal diffusivity degradation expected due to TEM-visible and invisible defects. Finely distributed invisible defects appear to play a much more important role in the thermal diffusivity reduction than larger TEM-visible dislocation loops. This work demonstrates the capability of TGS, in conjunction with kinetic theory models, to provide rapid, quantitative insight into defect densities and property evolution in irradiated materials.Peer reviewe

Estimate for thermal diffusivity in highly irradiated tungsten using molecular dynamics simulation

The changing thermal conductivity of an irradiated material is among the principal design considerations for any nuclear reactor, but at present few models are capable of predicting these changes starting from an arbitrary atomistic model. Here we present a simple model for computing the thermal diffusivity of tungsten, based on the conductivity of the perfect crystal and resistivity per Frenkel pair, and dividing a simulation into perfect and athermal regions statistically. This is applied to highly irradiated microstructures simulated with molecular dynamics. A comparison to experiments shows that simulations closely track observed thermal diffusivity over a range of doses from the dilute limit of a few Frenkel pairs to the high-dose saturation limit at three displacements per atom (dpa).Peer reviewe

Thermal diffusivity recovery and defect annealing kinetics of self-ion implanted tungsten prob e d by insitu transient grating spectroscopy

Tungsten is a promising candidate material for plasma-facing armour components in future fusion reactors. A key concern is irradiation-induced degradation of its normally excellent thermal transport properties. In this comprehensive study, thermal diffusivity degradation in ion-implanted tungsten and its evolution from room temperature (RT) to 1073 K is considered. Five samples were exposed to 20 MeV self-ions at RT to achieve damage levels ranging from 3.2 x 10(-4) to 3.2 displacements per atom (dpa). Transient grating spectroscopy with insitu heating was then used to study thermal diffusivity evolution as a function of temperature. Using a kinetic theory model, an equivalent point defect density is estimated from the measured thermal diffusivity. The results showed a prominent recovery of thermal diffusivity between 450 K and 650 K, which coincides with the onset of mono-vacancy mobility. After 1073 K annealing samples with initial damage of 3.2 x 10(-3) dpa or less recover close to the pristine value of thermal diffusivity. For doses of 3.2 x 10(-2) dpa or higher, on the other hand, a residual reduction in thermal diffusivity remains even after 1073 K annealing. Transmission electron microscopy reveals that this is associated with extended, irradiation-induced dislocation structures that are retained after annealing. A sensitivity analysis shows that thermal diffusivity provides an efficient tool for assessing total defect content in tungsten up to 10 0 0 K. (c) 2022 The Author(s). Published by Elsevier Ltd on behalf of Acta Materialia Inc.Peer reviewe

Non-contact, non-destructive mapping of thermal diffusivity and surface acoustic wave speed using transient grating spectroscopy

We present new developments of the laser-induced transient grating spectroscopy (TGS) technique that enable the measurement of large area 2D maps of thermal diffusivity and surface acoustic wave speed. Additional capabilities include targeted measurements and the ability to accommodate samples with increased surface roughness. These new capabilities are demonstrated by recording large TGS maps of deuterium implanted tungsten, linear friction welded aerospace alloys and high entropy alloys with a range of grain sizes. The results illustrate the ability to view grain microstructure in elastically anisotropic samples, and to detect anomalies in samples, for example due to irradiation and previous measurements. They also point to the possibility of using TGS to quantify grain size at the surface of polycrystalline materials.Comment: The following article has been submitted to Review of Scientific Instruments. After it is published, it will be found at https://aip.scitation.org/journal/rs

Characterising Ion-Irradiated FeCr : Hardness, Thermal Diffusivity and Lattice Strain

Ion-irradiated FeCr alloys are useful for understanding and predicting neutron damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation induced defects, probed by transmission electron microscopy (TEM), as well as changes in mechanical properties. Across these studies, a wide range of irradiation conditions has been employed on samples with different processing histories, which complicates the analysis of the relationship between defect structures and material properties. Furthermore, key properties, such as irradiation-induced changes in thermal transport and lattice strain, are little explored. Here we present a systematic study of Fe3Cr, Fe5Cr and Fe10Cr binary alloys implanted with 20 MeV Fe3+ ions to nominal doses of 0.01 dpa and 0.1 dpa at room temperature. Nanoindentation, transient grating spectroscopy (TGS) and X-ray micro-beam Laue diffraction were used to study the changes in hardness, thermal diffusivity and strain in the material as a function of damage and Cr content. Our results suggest that Cr leads to an increased retention of irradiation-induced defects, causing substantial changes in hardness and lattice strain. However, thermal diffusivity varies little with increasing damage and instead degrades significantly with increasing Cr content in the material. We find significant lattice strains even in samples exposed to a nominal displacement damage of 0.01 dpa. The defect density predicted from the lattice strain measurements is significantly higher than that observed in previous TEM studies, suggesting that TEM may not fully capture the irradiation-induced defect population. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.Peer reviewe

Frequency-dependent higher-order Stokes singularities near a planar elastic boundary: implications for the hydrodynamics of an active microswimmer near an elastic interface

The emerging field of self-driven active particles in fluid environments has recently created significant interest in the biophysics and bioengineering communities owing to their promising future biomedical and technological applications. These microswimmers move autonomously through aqueous media where under realistic situations they encounter a plethora of external stimuli and confining surfaces with peculiar elastic properties. Based on a far-field hydrodynamic model, we present an analytical theory to describe the physical interaction and hydrodynamic couplings between a self-propelled active microswimmer and an elastic interface that features resistance toward shear and bending. We model the active agent as a superposition of higher-order Stokes singularities and elucidate the associated translational and rotational velocities induced by the nearby elastic boundary. Our results show that the velocities can be decomposed in shear and bending related contributions which approach the velocities of active agents close to a no-slip rigid wall in the steady limit. The transient dynamics predict that contributions to the velocities of the microswimmer due to bending resistance are generally more pronounced than to shear resistance. Our results provide insight into the control and guidance of artificial and synthetic self-propelling active microswimmers near elastic confinements.Comment: 20 pages, 3 figures. To appear in PRE. Abstract shortened to comply with the arXiv limit of 1920 character

Microstructural and material property changes in severely deformed Eurofer-97

Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT, the average grain size reduced by a factor of $\sim$ 30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K - 800 K. Irradiation with 20 MeV Fe-ions to $\sim$ 0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation did not have a significant effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. These results provide a multi-faceted understanding of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties.Comment: 59 pages, 19 figure

Intravesical Therapy in Patients with Intermediate-risk Non–muscle-invasive Bladder Cancer: A Systematic Review and Network Meta-analysis of Disease Recurrence

Context Patients with intermediate-risk non–muscle-invasive bladder cancer (NMIBC) may pose a clinical dilemma without an agreed evidence-based decision tree for personalized treatment. Objective To perform a systematic review and network meta-analysis (NMA) to summarize available evidence on the oncologic outcomes of intravesical therapy in patients with intermediate-risk NMIBC. Evidence acquisition The MEDLINE, EMBASE, and ClinicalTrials.gov databases were searched in October 2020 according to the Preferred Reporting Items for Systematic Reviews and Meta-analyses statement. Studies were deemed eligible if they reported on oncologic outcomes in patients with intermediate-risk NMIBC treated with transurethral resection of bladder tumor with and without intravesical chemotherapy or bacillus Calmette-Guérin (BCG) immunotherapy. Evidence synthesis Twelve studies were included in a qualitative synthesis (systematic review); three were deemed eligible for a quantitative synthesis (NMA). An NMA of five different regimens was conducted for the association of treatment with the 5-yr recurrence risk. Chemotherapy with maintenance was associated with a lower likelihood of 5-yr recurrence than chemotherapy without maintenance (odds ratio [OR] 0.51, 95% credible interval [CI] 0.26–1.03). Immunotherapy, regardless of whether a full- or reduced-dose regimen, was not associated with a significantly lower likelihood of 5-yr recurrence when compared with chemotherapy without maintenance (OR 0.90, 95% CI 0.39–2.11 vs OR 0.93, 95% CI 0.40–2.19). Analysis of the treatment ranking revealed that chemotherapy with maintenance had the lowest 5-yr recurrence risk (P score 0.9666). Conclusions Our analysis indicates that chemotherapy with a maintenance regimen confers a superior oncologic benefit in terms of 5-yr recurrence risk compared to chemotherapy without maintenance in patients with intermediate-risk NMIBC. Regardless of the dose regimen, immunotherapy with BCG does not appear to be superior to chemotherapy in patients with intermediate-risk NMIBC in term of disease recurrence. However, owing to the lack of comparative studies, there is an unmet need for well-designed, large-scale trials to validate our findings and generate robust evidence on disease recurrence and progression. Patient summary A maintenance schedule of chemotherapy reduces the rate of long-term recurrence of bladder cancer that has not invaded the bladder muscle. Chemotherapy inserted directly into the bladder and immunotherapy without maintenance schedules seem to have limited benefit in preventing cancer recurrence

Epidemiology of injuries from fire, heat and hot substances : global, regional and national morbidity and mortality estimates from the Global Burden of Disease 2017 study

Background Past research has shown how fires, heat and hot substances are important causes of health loss globally. Detailed estimates of the morbidity and mortality from these injuries could help drive preventative measures and improved access to care. Methods We used the Global Burden of Disease 2017 framework to produce three main results. First, we produced results on incidence, prevalence, years lived with disability, deaths, years of life lost and disability-adjusted life years from 1990 to 2017 for 195 countries and territories. Second, we analysed these results to measure mortality-to-incidence ratios by location. Third, we reported the measures above in terms of the cause of fire, heat and hot substances and the types of bodily injuries that result. Results Globally, there were 8 991 468 (7 481 218 to 10 740 897) new fire, heat and hot substance injuries in 2017 with 120 632 (101 630 to 129 383) deaths. At the global level, the age-standardised mortality caused by fire, heat and hot substances significantly declined from 1990 to 2017, but regionally there was variability in age-standardised incidence with some regions experiencing an increase (eg, Southern Latin America) and others experiencing a significant decrease (eg, High-income North America). Conclusions The incidence and mortality of injuries that result from fire, heat and hot substances affect every region of the world but are most concentrated in middle and lower income areas. More resources should be invested in measuring these injuries as well as in improving infrastructure, advancing safety measures and ensuring access to care.Peer reviewe

Public health utility of cause of death data : applying empirical algorithms to improve data quality

Background: Accurate, comprehensive, cause-specific mortality estimates are crucial for informing public health decision making worldwide. Incorrectly or vaguely assigned deaths, defined as garbage-coded deaths, mask the true cause distribution. The Global Burden of Disease (GBD) study has developed methods to create comparable, timely, cause-specific mortality estimates; an impactful data processing method is the reallocation of garbage-coded deaths to a plausible underlying cause of death. We identify the pattern of garbage-coded deaths in the world and present the methods used to determine their redistribution to generate more plausible cause of death assignments. Methods: We describe the methods developed for the GBD 2019 study and subsequent iterations to redistribute garbage-coded deaths in vital registration data to plausible underlying causes. These methods include analysis of multiple cause data, negative correlation, impairment, and proportional redistribution. We classify garbage codes into classes according to the level of specificity of the reported cause of death (CoD) and capture trends in the global pattern of proportion of garbage-coded deaths, disaggregated by these classes, and the relationship between this proportion and the Socio-Demographic Index. We examine the relative importance of the top four garbage codes by age and sex and demonstrate the impact of redistribution on the annual GBD CoD rankings. Results: The proportion of least-specific (class 1 and 2) garbage-coded deaths ranged from 3.7% of all vital registration deaths to 67.3% in 2015, and the age-standardized proportion had an overall negative association with the Socio Demographic Index. When broken down by age and sex, the category for unspecified lower respiratory infections was responsible for nearly 30% of garbage-coded deaths in those under 1 year of age for both sexes, representing the largest proportion of garbage codes for that age group. We show how the cause distribution by number of deaths changes before and after redistribution for four countries: Brazil, the United States, Japan, and France, highlighting the necessity of accounting for garbage-coded deaths in the GBD