Experimental Characterization of the Propagation of Acoustic Waves in Pipe Strings

This thesis explores the propagation of acoustic waves in pipe strings by designing a series of experimental procedures to characterize their behavior. It describes in detail four sets of experiments that were used to characterize the behavior of the acoustic waves as they propagate in pipe strings. First, the Existence Test tried to prove the existence of the dispersion phenomenon in pipe strings by measuring the speed of waves with different frequencies on a small scale version of the field test bed. Second, the Consistency Test tried to determine the circumstances that allow for reliable and consistent measurements as a preparation for the field tests by testing the transmitter, receiver, and coupling consistency. Third, the Dispersion Test aimed at discovering all of the existing vibrational modes and matching them with the theoretical solutions by performing a two-dimensional Fourier Transform. Finally, the Frequency Test attempted to describe the pipe strings response to both narrowband and broadband signals by proving the existence of passbands and stopbands

Communication Systems Design for Downhole Acoustic Telemetry

The goal of this dissertation is to design a reliable and efficient communication system for downhole acoustic communication. This system is expected to operate in two different modes. A broadband high data rate mode in case of transmission of an image or a video file and a narrowband low data rate mode in case of transmission of sensor readings. This communication system functions by acoustic vibration of the pipes and uses them as the channel instead of installing long cables in areas that are hard to reach. However, this channel has unique characteristics where it exhibits several passbands and stopbands across the frequency spectrum. The communication system is expected to get around those challenges in both modes of operation. In the broadband case, the system uses Orthogonal Frequency Division Multiplexing to transmit data across multiple orthogonal frequencies spanning multiple passbands combined with an error-correction code to recover some of the losses caused by the channel. In the narrowband case, a short packet is transmitted at a low data rate where the signal spectrum can fit inside one passband. However, transmitting short packets induces a new synchronization problem. This dissertation investigates and explores in detail the problem of synchronization on short packets where each synchronization stage is examined. A simple algorithm that exploits the presence of error-correction codes is proposed for the frame synchronization stage and demonstrated to approach the optimal solution. Then, all synchronization stages are combined in order to study the effect of propagated errors caused by imperfect synchronization from one stage to the next and what can be done in the design of the packet and the receiver structure to mitigate those losses. The resulting synchronization procedure is applied to the pipe strings and demonstrated to achieve desirable levels of performance with the assistance of equalization at the receiver

The National Constituent Assembly of Tunisia and Civil Society Dynamics. EUSpring Working Paper No. 2, 8 July 2015

The Tunisian constitution of 27 January 2014 was deemed essentially compatible with international human rights principles and standards. These were adopted at the outcome of a dual process, which was underway both inside the National Constituent Assembly (NCA) and outside it, between the NCA and civil society stakeholders. Three successive drafts fell considerably short of expectations (6 August 2012, 14 December 2012 and 22 April 2013). The fourth draft (1 June 2013) was still fraught with 20 or so fundamental divergences. These were resolved, thanks to the National Dialogue in cooperation with the ad hoc “consensus commission” (lajnet tawafuqat) within the NCA, which is chaired by Mustapha Ben Jaafar (President of the NCA). The final text was overwhelmingly adopted on 26 January 2014 by 200 votes, with 12 against and four abstentions. It was promulgated on 10 February

Tunisia. Supervising Tunisian Elections by civil society: How to improve it? Arab Citizenship Review No. 7. January 2015

Introduction. On October 26, 2014, Tunisia held its second democratic legislative elections. Participation among more than 5 million registered voters was at about 60%, a relatively good turnout for the country, compared to the 52% voters in 2011. Preliminary results for the 33 constituencies (27 within the country and 6 for expatriates) reveal that secular frontrunner Nidaa Tounes (Call of Tunisia) won around 37% percent of votes while moderate Islamist party Ennahdha, winner of the 2011 elections and leader of Tunisia’s post-revolution government, received 27% of votes. Other parties with notable percentages are the Free Patriotic Union (French: UPL) with 4.4% and the leftist party, Popular Front, with 3.7%. Legislative were immediately followed by two round presidential elections the first one held on November 23, the second one after one month. Conversely to what was expected, people were more attracted by presidential elections even though president has notably less prerogatives than the parliament: representing the state, he is mainly responsible for determining the general state policies in the domains of defense, foreign relations and national security (article 76.) This paradox is ascribed to national imaginary more confident in a “Zaïm” (leader) rather than a collective institution such as a parliament. The turnout was at about 64% within the national 27 constituencies. Out of 70 candidates (including 5 female), 27 (with only one female) met the legal requirements to run for the presidency. The result confirms the legislative trend and Beji Caid Essebsi, leader of Nidaa, was proclaimed the third President of Tunisia. He gained 39.46% of the votes at the first round elections. Essebsi was followed by Moncef Marzouki who received an unexpected score (33.43%) at the first round, thanks to the support of Ennahdha audience and to an active and insistent campaign focused on the idea that revolution is threatened by old regime guard “come-back.” Rewarded for his long militant live, the extreme leftist Hamma Hammami in a new look gained 7,8% of the votes while the new comer Slim Riahi received 5,5% despite rumors circulating on his personal reputation. Notably, Kalthoum Kennou gained 0,55% (18.287 votes) but listed eleventh out of 27

Shall Tunisia Succeed in Becoming a Strong Democratic State? EUSpring Arab Citizenship Review No. 13, December 2015

From the Introduction. Arab revolutions have sparked real hopes for democracy, but the situation varies from one state to another and change has taken various directions, with unpredictable outcomes in the future. In light of current events, most of these countries seem to have failed in their democratic transition and also face the dissolution of their state apparatus in bloody civil wars. This leaves the door open to interpretations associating democracy with chaos. In this view, preserving post-colonial states – authoritarian in most cases – is better than having no state at all. This partially justified the coup that took place in Egypt, where the ‘Deep State’ has recovered its capabilities in a dictatorial manner. The Arab world thus faced an impasse: the state is either stable but authoritarian or democratic yet threatened with dissolution. The dilemma results in an impossible choice between stable dictatorship or freedom ending in chaos

Experimental Characterization of the Propagation of Acoustic Waves in Pipe Strings

This thesis explores the propagation of acoustic waves in pipe strings by designing a series of experimental procedures to characterize their behavior. It describes in detail four sets of experiments that were used to characterize the behavior of the acoustic waves as they propagate in pipe strings. First, the Existence Test tried to prove the existence of the dispersion phenomenon in pipe strings by measuring the speed of waves with different frequencies on a small scale version of the field test bed. Second, the Consistency Test tried to determine the circumstances that allow for reliable and consistent measurements as a preparation for the field tests by testing the transmitter, receiver, and coupling consistency. Third, the Dispersion Test aimed at discovering all of the existing vibrational modes and matching them with the theoretical solutions by performing a two-dimensional Fourier Transform. Finally, the Frequency Test attempted to describe the pipe strings response to both narrowband and broadband signals by proving the existence of passbands and stopbands

Communication Systems Design for Downhole Acoustic Telemetry

The goal of this dissertation is to design a reliable and efficient communication system for downhole acoustic communication. This system is expected to operate in two different modes. A broadband high data rate mode in case of transmission of an image or a video file and a narrowband low data rate mode in case of transmission of sensor readings. This communication system functions by acoustic vibration of the pipes and uses them as the channel instead of installing long cables in areas that are hard to reach. However, this channel has unique characteristics where it exhibits several passbands and stopbands across the frequency spectrum. The communication system is expected to get around those challenges in both modes of operation. In the broadband case, the system uses Orthogonal Frequency Division Multiplexing to transmit data across multiple orthogonal frequencies spanning multiple passbands combined with an error-correction code to recover some of the losses caused by the channel. In the narrowband case, a short packet is transmitted at a low data rate where the signal spectrum can fit inside one passband. However, transmitting short packets induces a new synchronization problem. This dissertation investigates and explores in detail the problem of synchronization on short packets where each synchronization stage is examined. A simple algorithm that exploits the presence of error-correction codes is proposed for the frame synchronization stage and demonstrated to approach the optimal solution. Then, all synchronization stages are combined in order to study the effect of propagated errors caused by imperfect synchronization from one stage to the next and what can be done in the design of the packet and the receiver structure to mitigate those losses. The resulting synchronization procedure is applied to the pipe strings and demonstrated to achieve desirable levels of performance with the assistance of equalization at the receiver

Identification of Potential Antimicrobial Compounds from a Marine Streptomyces sp. SM2.4 Strain (MH752437) Isolated from Rachgoun Island in Western Algeria

14 páginas.- 4 figuras.- 8 tablas.- 60 referenciasBackground: Marine actinobacteria are a potential resource for natural products; their secondary bioactive metabolites have shown several biological activities. Most of the isolated and identified actinobacteria in Algeria were usually explored from caves, Saharan soil or palm groves. The marine ecosystem is poorly explored and documented. Methods: Five Streptomyces strains producing bioactive compounds were isolated from Rachgoun Island located in Western Algeria and characterised phenotypically and genotypically using microbiological and 16S rRNA sequencing methods, respectively. The crude extract of the most representative strain ¿Streptomyces sp. strain SM2.4¿ and its seven active fractions were characterised by GC/MS analysis. Results: Streptomyces sp. strain SM2.4 revealed the strongest activity against the Gram-positive bacteria Staphylococcus aureus and Bacillus subtilis, the fungus Aspergillus niger and was inactive against Gram-negative bacteria. GC/MS analysis of the methylated crude extract of Streptomyces sp. strain SM2.4 revealed the presence of 11 major compounds including fatty acids methyl ester (12-methyltridecanoic acid methyl ester, 9-hexadecenoic acid methyl ester, hexadecanoic acid methyl ester, 14-methylhexadecanoic acid methyl ester and 16-methylheptadecanoic acid methyl ester), 2,4-di-tert-butylphenol, (4S,4aS,8aR)-4,8a-dimethyloctahydro-4a(2H)-naphthalenol (geosmin), 2,4-dimethylbenzaldehyde, 3,4-difluorobenzaldehyde, dimethylfuran-2,4-dicarboxylate and pyrrolo(1,2-a)pyrazine-1,4-dione, hexahydro-3-(2-methylpropyl)-. Partial purification of the crude extract by Thin-layer chromatography provided seven active fractions which were tested by radial diffusion assay. GC/MS analysis of the active TLC-fractions revealed the presence of a mixture of active compounds from which 2-(bromomethyl)-2-(2-methylphenyl)-1,3-dioxolane was found to be a new 1,3 dioxolane derivative. Furthermore, 3,4-dimethylbenzamide and pyrido[2,3-d] pyridazine-1,4-dione, hexahydro-3-(2-methylpropyl)-, were extracted for the first time from a natural source. Conclusion: Our study reveals that marine Streptomyces sp. strain SM2.4 has an interesting antimicrobial potential due to its panel of bioactive compounds.Peer reviewe

Formic acid synthesis using CO₂ as raw material: Techno-economic and environmental evaluation and market potential

The future of carbon dioxide utilisation (CDU) processes, depend on (i) the future demand of synthesised products with CO₂, (ii) the availability of captured and anthropogenic CO₂, (iii) the overall CO₂ not emitted because of the use of the CDU process, and (iv) the economics of the plant. The current work analyses the mentioned statements through different technological, economic and environmental key performance indicators to produce formic acid from CO₂, along with their potential use and penetration in the European context. Formic acid is a well-known chemical that has potential as hydrogen carrier and as fuel for fuel cells. This work utilises process flow modelling, with simulations developed in CHEMCAD, to obtain the energy and mass balances, and the purchase equipment cost of the formic acid plant. Through a financial analysis, with the net present value as selected metric, the price of the tonne of formic acid and of CO₂ are varied to make the CDU project financially feasible. According to our research, the process saves CO₂ emissions when compared to its corresponding conventional process, under specific conditions. The success or effectiveness of the CDU process will also depend on other technologies and/or developments, like the availability of renewable electricity and steam

Dynamique des mœurs et de la politique dans la culture islamique

La problématique public/privé en Islam suscite immédiatement un certain nombre d’objections, et même des soupçons sur sa pertinence épistémologique, les mêmes du reste qu’on observe chaque fois qu’on veut plier l’Islam à une grille de lecture dont les concepts, les protocoles de validation théorique et l’histoire empirique relèvent d’une autre historicité, celle de l’Occident moderne. Mais si on veut que la science sociale puisse avoir encore quelque chose à nous dire, il faudra, je crois, se..