51 research outputs found
The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends
[EN] In this work, poly(lactic acid), PLA and thermoplastic starch, TPS blends (with a fixed content of 30 wt.% TPS) were prepared by melt extrusion process to increase the low ductile properties of PLA. The TPS used contains an aliphatic/aromatic biodegradable polyester (AAPE) that provides good resistance to aging and moisture. This blend provides slightly improved ductile properties with an increase in elongation at break of 21.5% but phase separation is observed due to the lack of strong interactions between the two polymers. Small amounts of maleinized linseed oil (MLO) can positively contribute to improve the ductile properties of these blends by a combined plasticizing-compatibilizing effect. The elongation at break increases over 160% with the only addition of 6 phr MLO. One of the evidence of the plasticizing-compatibilizing effect provided by MLO is the change in the glass transition temperature (Tg) with a decrease of about 10 °C. Field emission scanning electron microscopy (FESEM) of PLA-TPS blends with varying amounts of maleinized linseed oil also suggests an increase in compatibility.This research was supported by the Ministry of Economy and Competitiveness-MINECO, Ref: MAT2014-59242-C2-1-R. Authors also thank to "Conselleria d'Educacio, Cultura i Esport"-Generalitat Valenciana, Ref: GV/2014/008 for financial support.Ferri Azor, JM.; García García, D.; Sánchez Nacher, L.; Fenollar Gimeno, OÁ.; Balart Gimeno, RA. (2016). The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends. Carbohydrate Polymers. 147:60-68. https://doi.org/10.1016/j.carbpol.2016.03.082S606814
Melt Processing of Cellulose Nanofibers Reinforced PLA from a Sustainable Masterbatch Process
In this study, cellulose nanofiber (CNF)-reinforced poly (lactic acid) (PLA) bionanocomposites were manufactured through industrially scalable equipments. The compatibility differences between hydrophobic PLA and hydrophilic CNF was counteracted using a water-based polyethylene glycol (PEG)/CNF masterbatch approach, hence minimizing CNF self-agglomeration during drying. Polarized light microscopy showed a progressive refinement of the CNF distribution into PLA upon increasing the PEG content. Rheological experiments provided further evidences about the efficiency of the PEG carrier sytem. Indeed the formation of strong CNF interactions or a three-dimensional CNF network was highlighted for the masterbatch-based composites holding 20 wt.% of PEG, corroborating the successfulness of our sustainable approach to disperse effectively CNF through melt blending techniques. Under thermo-mechanical loading, the rigid percolated CNF structure mastered the viscoelastic response of the plasticized composites, demonstrating the load-bearing capacity of well-entangled CNF in the glassy as well as in the rubbery state. This rapid and straightforward physical method is a suitable approach for preparing dried and concentrated melt-processable CNF masterbatches that can be adopted in conventional melt-processing methods at an industrial scale.
 
Pathways to green perspectives: Production and characterization of polylactide (PLA) nanocomposites filled with superparamagnetic magnetite nanoparticles
In the category of biopolymers, polylactide or polylactic acid (PLA) is one of the most promising candidates considered for future developments, as it is not only biodegradable under industrial composting conditions, but it is produced from renewable natural resources. The modification of PLA through the addition of nanofillers is considered as a modern approach to improve its main characteristic features (mechanical, thermal, barrier, etc.) and to obtain specific end-use properties. Iron oxide nanoparticles (NPs) of low dimension (10–20 nm) such as magnetite (Fe3O4), exhibit strong magnetization in magnetic field, are biocompatible and show low toxicity, and can be considered in the production of polymer nanocomposites requiring superparamagnetic proper-ties. Accordingly, PLA was mixed by melt-compounding with 4–16 wt.% magnetite NPs. Surface treatment of NPs with a reactive polymethylhydrogensiloxane (MHX) was investigated to render the nanofiller water repellent, less sensitive to moisture and to reduce the catalytic effects at high temperature of iron (from magnetite) on PLA macromolecular chains. The characterization of nanocomposites was focused on the differences of the rheology and morphology, modification, and improvements in the thermal properties using surface treated NPs, while the superparamagnetic behavior was confirmed by VSM (vibrating sample magnetometer) measurements. The PLA−magnetite nanocom-posites had strong magnetization properties at low magnetic field (values close to 70% of Mmax at H = 0.2 T), while the maximum magnetic signal (Mmax) was mainly determined by the loading of the nanofiller, without any significant differences linked to the surface treatment of MNPs. These bionanocomposites showing superparamagnetic properties, close to zero magnetic remanence, and coercivity, can be further produced at a larger scale by melt-compounding and can be designed for special end-use applications, going from biomedical to technical areas
Osteoconductive and bioresorbable composites based on poly-(L,L-lactide) and pseudowollastonite: From synthesis and interfacial compatibilization to in vitro bioactivity and in vivo osseointegration studies
This contribution reports on the elaboration of novel bioresorbable composites consisting of pseudowollastonite (psW) (a silicate-based polycrystalline ceramic (alpha-CaSiO3)) and poly(L,L-lactide) as a valuable polymeric candidate in bone-guided regeneration. These composites were prepared by direct melt-blending to avoid the use of organic solvents harmful for biomedical applications. Amphiphilic poly(ethylene oxide-b-L,L-lactide) diblock copolymers synthesized by ring-opening polymerization were added to psW-based composites to modulate the bioactivity of the composites. The bioactivity of the composites was first evaluated by monitoring the release of bioactive Ca2+ and (SiO4)(4-) ions as well as the concomitant formation of hydroxyapatite on the material surface after soaking them in physiological fluid. Subsequently, the composites were studied in vitro to evaluate their cytotoxicity in the presence of SaOS-2 osteoblastic cells and in vivo to assess their osteoconductivity in an orthotopic rat tibia model. This study provides a first insight into the use of direct melt-blended psW-poly(L,L-lactide) composites for bone-regeneration applications.status: publishe
Atmospheric plasma: a simple way of improving the interface between natural polysaccharides and polyesters
International audienceIn this study, a novel simple and fast method was developed of immobilizing a natural polysaccharide (chitosan) on a polylactide (PLA) surface. In order to overcome the lack of surface adhesion between the chitosan and the PLA due to incompatibility issues, atmospheric pressure plasma was used. The plasma activation was able to modify the PLA surface by generating surface chemistry proper for stabilizing the chitosan layer. The activation of the surface was monitored through water contact angle (WCA) measurements and X-ray photoelectron spectroscopy (XPS). Indeed, the introduction of new functionalities lowers the hydrophobicity of the PLA surface allowing an effective spreading and immobilization of the chitosan layer. The presence of chitosan on the polyester’s surface was proven by Fourier transform infrared spectroscopy (FTIR)
- …