25 research outputs found
First Results of the Ce(n,γ)Ce Cross-Section Measurement at n_TOF
An accurate measurement of the Ce(n,γ) energy-dependent cross-section was performed at the n_TOF facility at CERN. This cross-section is of great importance because it represents a bottleneck for the s-process nucleosynthesis and determines to a large extent the cerium abundance in stars. The measurement was motivated by the significant difference between the cerium abundance measured in globular clusters and the value predicted by theoretical stellar models. This discrepancy can be ascribed to an overestimation of the Ce capture cross-section due to a lack of accurate nuclear data. For this measurement, we used a sample of cerium oxide enriched in Ce to 99.4%. The experimental apparatus consisted of four deuterated benzene liquid scintillator detectors, which allowed us to overcome the difficulties present in the previous measurements, thanks to their very low neutron sensitivity. The accurate analysis of the p-wave resonances and the calculation of their average parameters are fundamental to improve the evaluation of the Ce Maxwellian-averaged cross-section
First Results of the Ce(n,γ)Ce Cross-Section Measurement at n_TOF
An accurate measurement of the Ce(n,γ) energy-dependent cross-section was performed at the n_TOF facility at CERN. This cross-section is of great importance because it represents a bottleneck for the s-process nucleosynthesis and determines to a large extent the cerium abundance in stars. The measurement was motivated by the significant difference between the cerium abundance measured in globular clusters and the value predicted by theoretical stellar models. This discrepancy can be ascribed to an overestimation of the Ce capture cross-section due to a lack of accurate nuclear data. For this measurement, we used a sample of cerium oxide enriched in Ce to 99.4%. The experimental apparatus consisted of four deuterated benzene liquid scintillator detectors, which allowed us to overcome the difficulties present in the previous measurements, thanks to their very low neutron sensitivity. The accurate analysis of the p-wave resonances and the calculation of their average parameters are fundamental to improve the evaluation of the Ce Maxwellian-averaged cross-section
Fragment Distributions of Transfer- and Fusion-Induced Fission from 238U+12C Reactions Measured Through Inverse Kinematics
Transfer- and fussion-induced fission in inverse kinematics was proven to be a very powerful tool to investigate nuclear fission, widening the information of the fission fragments and the exoticity of the fissioning systems. A campaign for fission investigation is being carried out in GANIL with this technique. In these experiments, a beam of 238-U, accelerated to 6.1 MeV/u, impinges on a carbon target. Fissioning systems from U to Am are populated by transfer reactions, with excitation energies that range from few MeV up to 20 MeV, and fussion reactions that reach higher excitation energy.The use of inverse kinematics and the VAMOS spectrometer permits the measurement of isotopic yields of the fission fragments over the complete fragment distribution in the produced fissioning systems, most of them exotic nuclei, as a function of the induced excitation energy. With this information, it is possible to obtain the neutron excess of the fragments, as well as the neutron multiplicity and the Z even-odd staggering . These observables allow the investigation of the role of nuclear structure, the sharing of excitation energy, and the scission configuration along the full fragment distribution. These new results help to determine the features of the fission process, which is of importance for the design of new-generation nuclear power plants and for the incineration of nuclear waste. In addition, they can also be useful for RIB production
First Results of the 140Ce(n,g)141Ce Cross-Section Measurement at n_TOF
The cerium oxide material for this measurement was provided by T. Katabuchi
of the Tokyo Institute of Technology.An accurate measurement of the 140Ce(n,g) energy-dependent cross-section was performed
at the n_TOF facility at CERN. This cross-section is of great importance because it represents a
bottleneck for the s-process nucleosynthesis and determines to a large extent the cerium abundance in
stars. The measurement was motivated by the significant difference between the cerium abundance
measured in globular clusters and the value predicted by theoretical stellar models. This discrepancy
can be ascribed to an overestimation of the 140Ce capture cross-section due to a lack of accurate
nuclear data. For this measurement, we used a sample of cerium oxide enriched in 140Ce to 99.4%.
The experimental apparatus consisted of four deuterated benzene liquid scintillator detectors, which
allowed us to overcome the difficulties present in the previous measurements, thanks to their very
low neutron sensitivity. The accurate analysis of the p-wave resonances and the calculation of their
average parameters are fundamental to improve the evaluation of the 140Ce Maxwellian-averaged
cross-section
Fission program at n_TOF
Since its start in 2001 the n_TOF collaboration developed a measurement program on fission, in view of advanced fuels in new generation reactors. A special effort was made on measurement of cross sections of actinides, exploiting the peculiarity of the n_TOF neutron beam which spans a huge energy domain, from the thermal region up to GeV. Moreover fission fragment angular distributions have also been measured. An overview of the cross section results achieved with different detectors is presented, including a discussion of the 237Np case where discrepancies showed up between different detector systems. The results on the anisotropy of the fission fragments and its implication on the mechanism of neutron absorption, and in applications, are also shown
Measurement of the
Neutron cross section measurements are often made relative to a neutron cross section standard. Thus, the accuracy of the neutron standards determines the best possible accuracy of the neutron measurements. The 235U(n,f) cross section is widely used as reference, while it is considered a standard at thermal point and between 0.15 to 200 MeV. For this reason, additional cross section data for the 235U(n,f) reaction are useful in order to improve the accuracy and to extend the energy range of the standard. In this work, preliminary results of the measurement of the 235U(n,f) cross-section relative to the standard 10B(n,a) reaction are presented. The high accuracy measurement was performed at the experimental area EAR-1 of the n_TOF facility at CERN, aiming at covering the energy range from the thermal region up to approximately 100 keV. The samples were produced at JRC-Geel in Belgium, while the experimental setup was based on Micromegas detectors
Constraints on the dipole photon strength for the odd uranium isotopes
Background: The photon strength functions (PSFs) and nuclear level density (NLD) are key ingredients for calculation of the photon interaction with nuclei, in particular the reaction cross sections. These cross sections are important especially in nuclear astrophysics and in the development of advanced nuclear technologies.
Purpose: The role of the scissors mode in the M1 PSF of (well-deformed) actinides was investigated by several experimental techniques. The analyses of different experiments result in significant differences, especially on the strength of the mode. The shape of the low-energy tail of the giant electric dipole resonance is uncertain as well. In particular, some works proposed a presence of the E1 pygmy resonance just above 7 MeV. Because of these inconsistencies additional information on PSFs in this region is of great interest.
Methods: The γ-ray spectra from neutron-capture reactions on the 234U, 236 U, and 238 U nuclei have been measured with the total absorption calorimeter of the n_TOF facility at CERN. The background-corrected sum-energy and multi-step-cascade spectra were extracted for several isolated s-wave resonances up to about 140 eV.
Results: The experimental spectra were compared to statistical model predictions coming from a large selection of models of photon strength functions and nuclear level density. No combination of PSF and NLD models from literature is able to globally describe our spectra. After extensive search we were able to find model combinations with modified generalized Lorentzian (MGLO) E1 PSF, which match the experimental spectra as well as the total radiative widths.
Conclusions: The constant temperature energy dependence is favored for a NLD. The tail of giant electric dipole resonance is well described by the MGLO model of the E1 PSF with no hint of pygmy resonance. The M1 PSF must contain a very strong, relatively wide, and likely double-resonance scissors mode. The mode is responsible for about a half of the total radiative width of neutron resonances and significantly affects the radiative cross section
Measurement of the energy-differential cross-section of the 12C(n,p)12B and 12C(n,d)11B reactions at the n_TOF facility at CERN
Although the 12C(n,p)12B and 12C(n,d)11B reactions are of interest in several fields of basic and applied Nuclear Physics the present knowledge of these two cross-sections is far from being accurate and reliable, with both evaluations and data showing sizable discrepancies. As part of the challenging n_TOF program on (n,cp) nuclear reactions study, the energy differential cross-sections of the 12C(n,p)12B and 12C(n,d)11 B reactions have been measured at CERN from the reaction thresholds up to 30 MeV neutron energy. Both measurements have been recently performed at the long flight-path (185 m) experimental area of the n_TOF facility at CERN using a pure (99.95%) rigid graphite target and two silicon telescopes. In this paper an overview of the experiment is presented together with a few preliminary results
Review and new concepts for neutron-capture measurements of astrophysical interest
The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely (n,γ) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on total energy detectors will be presented to illustrate how, advances in instrumentation have led, over the years, to the assessment and discovery of many new aspects of s-process nucleosynthesis and to the progressive refinement of theoretical models of stellar evolution. A summary will be presented on current efforts to develop new detection concepts, such as the Total-Energy Detector with γ-ray imaging capability (i-TED). The latter is based on the simultaneous combination of Compton imaging with neutron time-of-flight (TOF) techniques, in order to achieve a superior level of sensitivity and selectivity in the measurement of stellar neutron capture rates
Imaging neutron capture cross sections: i-TED proof-of-concept and future prospects based on machine-learning techniques
i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in (n,γ) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background rejection. To this aim both 197Au(n,γ) and 56Fe(n,γ) reactions were measured at CERN n\_TOF using an i-TED demonstrator based on only three position-sensitive detectors. Two \cds detectors were also used to benchmark the performance of i-TED. The i-TED prototype built for this study shows a factor of ∼3 higher detection sensitivity than state-of-the-art \cds detectors in the ∼10~keV neutron energy range of astrophysical interest. This paper explores also the perspectives of further enhancement in performance attainable with the final i-TED array consisting of twenty position-sensitive detectors and new analysis methodologies based on Machine-Learning techniques