114 research outputs found
Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines
The maintenance works (e.g. inspection, repair) of aero-engines while still attached on the airframes requires a desirable approach since this can significantly shorten both the time and cost of such interventions as the aerospace industry commonly operates based on the generic concept “power by the hour”. However, navigating and performing a multi-axis movement of an end-effector in a very constrained environment such as gas turbine engines is a challenging task. This paper reports on the development of a highly flexible slender (i.e. low diameter-to-length ratios) continuum robot of 25 degrees of freedom capable to uncoil from a drum to provide the feeding motion needed to navigate into crammed environments and then perform, with its last 6 DoF, complex trajectories with a camera equipped machining end-effector for allowing in-situ interventions at a low-pressure compressor of a gas turbine engine. This continuum robot is a compact system and presents a set of innovative mechatronics solutions such as: (i) twin commanding cables to minimise the number of actuators; (ii) twin compliant joints to enable large bending angles (±90°) arranged on a tapered structure (start from 40 mm to 13 mm at its end); (iii) feeding motion provided by a rotating drum for coiling/uncoiling the continuum robot; (iv) machining end-effector equipped with vision system. To be able to achieve the in-situ maintenance tasks, a set of innovative control algorithms to enable the navigation and end-effector path generation have been developed and implemented. Finally, the continuum robot has been tested both for navigation and movement of the end-effector against a specified target within a gas turbine engine mock-up proving that: (i) max. deviations in navigation from the desired path (1000 mm length with bends between 45° and 90°) are ±10 mm; (ii) max. errors in positioning the end-effector against a target situated at the end of navigation path is 1 mm. Thus, this paper presents a compact continuum robot that could be considered as a step forward in providing aero-engine manufacturers with a solution to perform complex tasks in an invasive manner
Targeting free light chain (FLC) secretion and the unfolded protein response in myeloma cells using VaN, a combination of repurposed drugs
Carnal encounters and producing socialist Yugoslavia: voluntary youth labour actions on the newsreel screen
This article explores the role that the newsreel genre played in the production of socialist Yugoslav territory, understood as reshaping the body of the socius. We analyse news reports concerning voluntary youth labour actions, which were one of the most important features of Yugoslav socialist society and which featured heavily in Yugoslav official newsreels. We argue that the newsreel provided a specific liminal space in between the ‘real’/non-cinematic and ‘screened’/cinematic experience, where we locate occurrences of carnal encounters between the body on the cinematic screen and the body of the audience. In this regard, we discuss two characteristic types of frame which were present in the newsreel reports on labour actions: the somatic frame and the machinic-labour frame
Doctor–patient communication in a Southeast Asian setting: the conflict between ideal and reality
Doctor–patient communication has been extensively studied in non-Western contexts and in relation to patients’ cultural and education backgrounds. This study explores the perceived ideal communication style for doctor–patient consultations and the reality of actual practice in a Southeast Asian context. We conducted the study in a teaching hospital in Indonesia, using a qualitative and a quantitative design. In-depth interviews were conducted with ten internal medicine specialists, ten internal medicine residents, 16 patients in two groups based on education level and ten most senior medical students. The contributions of doctors and patients to the communication during consultations were observed and rated quantitatively by thirty internal medicine residents, 393 patients with different educational backgrounds and ten senior medical students. The ‘informed and shared decision making’ is the central observation in this quantitative study. The results of the interviews showed that Southeast Asian stakeholders are in favor of a partnership style of communication and revealed barriers to achieving this: doctors and patients are not prepared for a participatory style and high patient load due to an inefficient health care system does not allow sufficient time for this type of communication. The results of the quantitative study showed a sharp contrast between observed and ideal communication styles. A paternalistic style seems to prevail, irrespective of patients’ educational background. We found a sharp conflict between ideal and reality concerning doctor–patient communication in a Southeast Asian context. Further studies should examine ways to change the prevailing communication style in the desired direction
Manufacturing at double the speed
The speed of manufacturing processes today depends on a trade-off between the physical processes of production, the wider system that allows these processes to operate and the co-ordination of a supply chain in the pursuit of meeting customer needs. Could the speed of this activity be doubled? This paper explores this hypothetical question, starting with examination of a diverse set of case studies spanning the activities of manufacturing. This reveals that the constraints on increasing manufacturing speed have some common themes, and several of these are examined in more detail, to identify absolute limits to performance. The physical processes of production are constrained by factors such as machine stiffness, actuator acceleration, heat transfer and the delivery of fluids, and for each of these, a simplified model is used to analyse the gap between current and limiting performance. The wider systems of production require the co-ordination of resources and push at the limits of human biophysical and cognitive limits. Evidence about these is explored and related to current practice. Out of this discussion, five promising innovations are explored to show examples of how manufacturing speed is increasing ? with line arrays of point actuators, parallel tools, tailored application of precision, hybridisation and task taxonomies. The paper addresses a broad question which could be pursued by a wider community and in greater depth, but even this first examination suggests the possibility of unanticipated innovations in current manufacturing practices
Spatializing the Ecological Leviathan: Territorial Strategies and the Production of Regional Natures
This paper explores a dual absence – the absence of the state within contemporary geographical analyses of nature; and the absence of nature within contemporary explorations of state power. We argue that the modern state continues to play a crucial role in framing social interactions with nature, while nature is still vital to states within their realization of different forms of material and ideological power. In order to reconnect analyses of the state and nature, this paper combines work on the production of nature and state strategy with Lefebvre’s recently translated writings on state space and territory. By focusing on the production of territory (or state space), we explore the interaction of the state and nature in the context of the political management of social and ecological space. We unravel the spatial entanglements of the state and nature through an analysis of the British state’s territorial strategies within the West Midlands region. By considering three key historical periods within the history of the West Mid-lands we reveal how the emergence of the regional space called the West Midlands is a product of the ongoing spatial dialectics of state and nature therein
Is Malaysia’s banded langur, Presbytis femoralis femoralis, actually Presbytis neglectus neglectus? Taxonomic revision with new insights on the radiation history of the Presbytis species group in Southeast Asia
The disjunct distribution of Presbytis femoralis subspecies across Sumatra (P. f. percura), southern (P. f. femoralis) and northern (P. f. robinsoni) Peninsular Malaysia marks the unique vicariance events in the Sunda Shelf. However, the taxonomic positions and evolutionary history of P. f. femoralis are unresolved after decades of research. To elucidate this evolutionary history, we analyzed 501 base pairs of the mitochondrial HVSI gene from 25 individuals representing Malaysia’s banded langur, with the addition of 29 sequences of Asian Presbytis from Genbank. Our results revealed closer affinity of P. f. femoralis to P. m. mitrata and P. m. sumatrana while maintaining the monophyletic state of P. f. femoralis as compared to P. f. robinsoni. Two central theses were inferred from the results; (1) P. f. femoralis does not belong in the same species classification as P. f. robinsoni, and (2) P. f. femoralis is the basal lineage of the Presbytis in Peninsular Malaysia. Proving the first hypothesis through genetic analysis, we reassigned P. f. femoralis of Malaysia to Presbytis neglectus (Schlegel’s banded langur) (Schlegel in Revue Methodique, Museum d’Histoire Naturelle des Pays-Bas 7:1, 1876) following the International Code of Zoological Nomenclature (article 23.3). The ancestors of P. neglectus are hypothesized to have reached southern Peninsular Malaysia during the Pleistocene and survived in refugium along the western coast. Consequently, they radiated upward, forming P. f. robinsoni and P. siamensis resulting in the highly allopatric distribution in Peninsular Malaysia. This study has successfully resolved the taxonomic position of P. neglectus in Peninsular Malaysia while providing an alternative biogeographic theory for the Asian Presbytis
Islamic influences on urban form in Sumatra in the seventeenth to nineteenth centuries CE
This article focuses on the evolution of three urban centres: Palembang, Padang and Tanjung Pinang. Where appropriate, brief information about other towns is added which shows that the three towns are typical for towns on the east coast, the west coast and the islands in the Straits of Malacca respectively. Unfortunately, there is no place in the Minangkabau highlands for which historical sources exist that can help to reconstruct the townscape in a comparably detailed way. The descriptions of Palembang, Padang and Tanjung Pinang give details of Islamic buildings and provide information about the development of the settlements as a whole. These morphological histories have a value in their own right. They form a baseline to assess fully the specific Islamic influence on urban form in the disruption of some Islamic transformations. The Dutch changes bring out the previous Islamic influences more sharply. In the last section the emic (indigenous) conceptions of 'urban' will be analysed, by exploring the contrast between town and village and the role of Islamic buildings to accentuate the difference. The conclusion will list the most important empirical generalisations drawn from the descriptions. © 2004 Editors, Indonesia and the Malay World
- …