<i>In Situ</i> Sampling of Relative Dust Devil Particle Loads and Their Vertical Grain Size Distributions

During a field campaign in the Sahara Desert in southern Morocco, spring 2012, we sampled the vertical grain size distribution of two active dust devils that exhibited different dimensions and intensities. With these in situ samples of grains in the vortices, it was possible to derive detailed vertical grain size distributions and measurements of the lifted relative particle load. Measurements of the two dust devils show that the majority of all lifted particles were only lifted within the first meter (~46.5% and ~61% of all particles; ~76.5 wt % and ~89 wt % of the relative particle load). Furthermore, ~69% and ~82% of all lifted sand grains occurred in the first meter of the dust devils, indicating the occurrence of ‘‘sand skirts.’’ Both sampled dust devils were relatively small (~15m and ~4–5m in diameter) compared to dust devils in surrounding regions; nevertheless, measurements show that ~58.5% to 73.5% of all lifted particles were small enough to go into suspension (<31 mm, depending on the used grain size classification). This relatively high amount represents only ~0.05 to 0.15 wt % of the lifted particle load. Larger dust devils probably entrain larger amounts of fine-grained material into the atmosphere, which can have an influence on the climate. Furthermore, our results indicate that the composition of the surface, on which the dust devils evolved, also had an influence on the particle load composition of the dust devil vortices. The internal particle load structure of both sampled dust devils was comparable related to their vertical grain size distribution and relative particle load, although both dust devils differed in their dimensions and intensities. A general trend of decreasing grain sizes with height was also detected

Access and metro network convergence for flexible end-to-end network design

This paper reports on the architectural, protocol, physical layer, and integrated testbed demonstrations carried out by the DISCUS FP7 consortium in the area of access - metro network convergence. Our architecture modeling results show the vast potential for cost and power savings that node consolidation can bring. The architecture, however, also recognizes the limits of long-reach transmission for low-latency 5G services and proposes ways to address such shortcomings in future projects. The testbed results, which have been conducted end-to-end, across access - metro and core, and have targeted all the layers of the network from the application down to the physical layer, show the practical feasibility of the concepts proposed in the project

How, when and where current mass flows in Martian gullies are driven by CO2 sublimation

Martian gullies resemble water-carved gullies on Earth, yet their present-day activity cannot be explained by water-driven processes. The sublimation of CO2 has been proposed as an alternative driver for sediment transport, but how this mechanism works remains unknown. Here we combine laboratory experiments of CO2-driven granular flows under Martian atmospheric pressure with 1D climate simulation modelling to unravel how, where, and when CO2 can drive present-day gully activity. Our work shows that sublimation of CO2 ice, under Martian atmospheric conditions can fluidize sediment and creates morphologies similar to those observed on Mars. Furthermore, the modelled climatic and topographic boundary conditions for this process, align with present-day gully activity. These results have implications for the influence of water versus CO2-driven processes in gully formation and for the interpretation of gully landforms on other planets, as their existence is no longer definitive proof for flowing liquids

Water induced sediment levitation enhances downslope transport on Mars

On Mars, locally warm surface temperatures (~293 K) occur, leading to the possibility of (transient) liquid water on the surface. However, water exposed to the martian atmosphere will boil, and the sediment transport capacity of such unstable water is not well understood. Here, we present laboratory studies of a newly recognized transport mechanism: “levitation” of saturated sediment bodies on a cushion of vapor released by boiling. Sediment transport where this mechanism is active is about nine times greater than without this effect, reducing the amount of water required to transport comparable sediment volumes by nearly an order of magnitude. Our calculations show that the effect of levitation could persist up to ~48 times longer under reduced martian gravity. Sediment levitation must therefore be considered when evaluating the formation of recent and present-day martian mass wasting features, as much less water may be required to form such features than previously thought

First in-situ analysis of dust devil tracks on Earth and their comparison with tracks on Mars

In this study we report about the first in-situ analysis of terrestrial dust devil tracks (DDTs) observed in the Turpan depression desert in northwestern China. Passages of active dust devils remove a thin layer of fine grained material (< ∼63 μm), cleaning the upper surface of coarse sands (0.5–1 mm). This erosional process changes the photometric properties of the upper surface causing the albedo differences within the track to the surroundings. Measurements imply that a removal of an equivalent layer thickness of ∼2 μm is sufficient to form the dark dust devil tracks. Our terrestrial results are in agreement with the mechanism proposed by Greeley et al. (2005) for the formation of DDTs on Mars

A novel topographic parameterization scheme indicates that martian gullies display the signature of liquid water

Martian gullies resemble gullies carved by water on Earth, yet are thought to have formed in an extremely cold (2-driven processes. That this argument persists demonstrates the limitations of morphological interpretations made from 2D images, especially when similar-looking landforms can form by very different processes. To overcome this we have devised a parameterization scheme, based on statistical discriminant analysis and hydrological terrain analysis of meter-scale digital topography data, which can distinguish between dry and wet surface processes acting on a landscape. Applying this approach to new meter-scale topographic datasets of Earth, the Moon and Mars, we demonstrate that martian gullied slopes are dissimilar to dry, gullied slopes on Earth and the Moon, but are similar to both terrestrial debris flows and fluvial gullies. We conclude that liquid water was integral to the process by which martian gullies formed. Finally, our work shows that quantitative 3D analyses of landscape have great potential as a tool in planetary science, enabling remote assessment of processes acting on planetary surfaces

Rethinking use-wear analysis and experimentation as applied to the study of past hominin tool use

In prehistoric human populations, technologies played a fundamental role in the acquisition of different resources and are represented in the main daily living activities, such as with bone, wooden, and stone-tipped spears for hunting, and chipped-stone tools for butchering. Considering that paleoanthropologists and archeologists are focused on the study of different processes involved in the evolution of human behavior, investigating how hominins acted in the past through the study of evidence on archeological artifacts is crucial. Thus, investigat ing tool use is of major importance for a comprehensive understanding of all processes that characterize human choices of raw materials, techniques, and tool types. Many functional assumptions of tool use have been based on tool design and morphology according to archeologists’ interpretations and ethnographic observations. Such assumptions are used as baselines when inferring human behavior and have driven an improvement in the methods and techniques employed in functional studies over the past few decades. Here, while arguing that use-wear analysis is a key discipline to assess past hominin tool use and to interpret the organization and variability of artifact types in the archeological record, we aim to review and discuss the current state-of-the-art methods, protocols, and their limitations. In doing so, our discussion focuses on three main topics: (1) the need for fundamental improvements by adopting established methods and techniques from similar research fields, (2) the need to implement and combine different levels of experimentation, and (3) the crucial need to establish standards and protocols in order to improve data quality, standard ization, repeatability, and reproducibility. By adopting this perspective, we believe that studies will increase the reliability and applicability of use-wear methods on tool function. The need for a holistic approach that combines not only use-wear traces but also tool technology, design, curation, durability, and efficiency is also debated and revised. Such a revision is a crucial step if archeologists want to build major inferences on human decision making behavior and biocultural evolution processes.info:eu-repo/semantics/publishedVersio

Bright dust devil tracks on Earth: Implications for their formation on Mars

We report on the first observations of bright dust devil tracks (BDDTs) on Earth, observed in the Turpan depression desert in northwestern China, where raindrop impacts on sand surfaces form aggregates of sand, silt and clay resulting in rough surface textures, which are destroyed by passages of dust devils leading to smooth surface textures within the tracks. The differences in photometric properties between the track and outside the tracks cause the albedo differences leading to the formation of BDDTs and similar processes might lead to BDDTs on Mars in areas with thick dust covers