Photolysis of sulphuric acid as the source of sulphur oxides in the mesosphere of Venus

The sulphur cycle plays fundamental roles in the chemistry and climate of Venus. Thermodynamic equilibrium chemistry at the surface of Venus favours the production of carbonyl sulphide and to a lesser extent sulphur dioxide. These gases are transported to the middle atmosphere by the Hadley circulation cell. Above the cloud top, a sulphur oxidation cycle involves conversion of carbonyl sulphide into sulphur dioxide, which is then transported further upwards. A significant fraction of this sulphur dioxide is subsequently oxidized to sulphur trioxide and eventually reacts with water to form sulphuric acid. Because the vapour pressure of sulphuric acid is low, it readily condenses and forms an upper cloud layer at altitudes of 60–70 km, and an upper haze layer above 70 km (ref. 9), which effectively sequesters sulphur oxides from photochemical reactions. Here we present simulations of the fate of sulphuric acid in the Venusian mesosphere based on the Caltech/JPL kinetics model, but including the photolysis of sulphuric acid. Our model suggests that the mixing ratios of sulphur oxides are at least five times higher above 90 km when the photolysis of sulphuric acid is included. Our results are inconsistent with the previous model results but in agreement with the recent observations using ground-based microwave spectroscopy and by Venus Express

Experiments with a high-density positronium gas

We have created a high-density gas of interacting positronium (Ps) atoms by irradiating a thin film of nanoporous silica with intense positron bursts and measured the Ps lifetime using a new single-shot technique. When the positrons were compressed to 3.3×1010cm-2, the apparent intensity of the orthopositronium lifetime component was found to decrease by 33%. We believe this is due to a combination of spin exchange quenching and Ps2 molecule formation associated with colliding pairs of oppositely polarized triplet positronium atoms. Our data imply an effective cross section for this process of 2.9×10-14cm-2. © 2005 The American Physical Society

Measurement of the antineutrino neutral-current elastic differential cross section

arXiv:1309.7257v1 [hep-ex

Calculating unreported confidence intervals for paired data

<p>Abstract</p> <p>Background</p> <p>Confidence intervals (or associated standard errors) facilitate assessment of the practical importance of the findings of a health study, and their incorporation into a meta-analysis. For paired design studies, these items are often not reported. Since the descriptive statistics for such studies are usually presented in the same way as for unpaired designs, direct computation of the standard error is not possible without additional information.</p> <p>Methods</p> <p>Elementary, well-known relationships between standard errors and <it>p</it>-values were used to develop computation schemes for paired mean difference, risk difference, risk ratio and odds ratio.</p> <p>Results</p> <p>Unreported confidence intervals for large sample paired binary and numeric data can be computed fairly accurately using simple methods provided the <it>p</it>-value is given. In the case of paired binary data, the design based 2 × 2 table can be reconstructed as well.</p> <p>Conclusions</p> <p>Our results will facilitate appropriate interpretation of paired design studies, and their incorporation into meta-analyses.</p

Complex Fluids and Hydraulic Fracturing

Nearly 70 years old, hydraulic fracturing is a core technique for stimulating hydrocarbon production in a majority of oil and gas reservoirs. Complex fluids are implemented in nearly every step of the fracturing process, most significantly to generate and sustain fractures and transport and distribute proppant particles during and following fluid injection. An extremely wide range of complex fluids are used: naturally occurring polysaccharide and synthetic polymer solutions, aqueous physical and chemical gels, organic gels, micellar surfactant solutions, emulsions, and foams. These fluids are loaded over a wide range of concentrations with particles of varying sizes and aspect ratios and are subjected to extreme mechanical and environmental conditions. We describe the settings of hydraulic fracturing (framed by geology), fracturing mechanics and physics, and the critical role that non-Newtonian fluid dynamics and complex fluids play in the hydraulic fracturing process

Ready-to-Use Therapeutic Food for Catch-Up Growth in Children after an Episode of Plasmodium falciparum Malaria: An Open Randomised Controlled Trial

Background: Catch-up growth after an infection is essential for children to maintain good nutritional status. To prevent malnutrition, WHO recommends that children are given one additional healthy meal per day during the 2 weeks after onset of illness. We investigated to what extent ready-to-use therapeutic food (RUTF) promotes catch-up growth in children after an acute, uncomplicated episode of Plasmodium falciparum malaria. Methods: We did an open randomised trial of children aged 6–59 months with confirmed malaria who attended a Médecins Sans Frontières-supported outpatient clinic in Katanga Province, Democratic Republic of Congo. All children received a clinical examination and malaria treatment. Patients were then randomly assigned to either an RUTF group, who received daily supplemental RUTF (a high-protein peanut-based paste) for 14 days, or to a control group, who received no supplemental food. Children were weighed at baseline and on days 14 and 28. The primary outcome was mean weight change after 14 days ’ RUTF. Analysis was by intention-to-treat. Results: 93 children received RUTF and 87 received no food supplementation. At day 14, the RUTF group had a mean weight gain of 353 g compared with 189 g in the control group (difference 164 [95%CI 52–277], p = 0.005). However, at day 28 there was no statistically significant difference between the groups (539 g versus 414 g, respectively [p = 0.053]). Similarly, rate of weight gain per kg bodyweight per day was significantly higher at day 14 in the RUTF group (2.4 g/kg pe

Boosted output performance of triboelectric nanogenerator via electric double layer effect

For existing triboelectric nanogenerators ( TENGs), it is important to explore unique methods to further enhance the output power under realistic environments to speed up their commercialization. We report here a practical TENG composed of three layers, in which the key layer, an electric double layer, is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al. The efficient charge separation in the middle layer, based on Volta&apos;s electrophorus, results from sequential contact configuration of the TENG and direct electrical connection of the middle layer to the earth. A sustainable and enhanced output performance of 1.22mA and 46.8 mW cm(-2) under low frequency of 3 Hz is produced, giving over 16-fold enhancement in output power and corresponding to energy conversion efficiency of 22.4%. Finally, a portable power-supplying system, which provides enough d.c. power for charging a smart watch or phone battery, is also successfully developed.ope

The inverse-trans-influence in tetravalent lanthanide and actinide bis(carbene) complexes

Across the periodic table the trans-influence operates, whereby tightly bonded ligands selectively lengthen mutually trans metal–ligand bonds. Conversely, in high oxidation state actinide complexes the inverse-trans-influence operates, where normally cis strongly donating ligands instead reside trans and actually reinforce each other. However, because the inversetrans-influence is restricted to high-valent actinyls and a few uranium(V/VI) complexes, it has had limited scope in an area with few unifying rules. Here we report tetravalent cerium, uranium and thorium bis(carbene) complexes with trans C¼M¼C cores where experimental and theoretical data suggest the presence of an inverse-trans-influence. Studies of hypothetical praseodymium(IV) and terbium(IV) analogues suggest the inverse-trans-influence may extend to these ions but it also diminishes significantly as the 4f orbitals are populated. This work suggests that the inverse-trans-influence may occur beyond high oxidation state 5f metals and hence could encompass mid-range oxidation state actinides and lanthanides. Thus, the inverse-trans-influence might be a more general f-block principle