1,612 research outputs found

    Estimating scattered and absorbed radiation in plant canopies by remote sensing

    Get PDF
    Several research avenues are summarized. The relationships of canopy characteristics to multispectral reflectance factors of vegetation are reviewed. Several alternative approaches for incorporating spectrally derived information into plant models are discussed, using corn as the main example. A method is described and evaluated whereby a leaf area index is estimated from measurements of radiation transmitted through plant canopies, using soybeans as an example. Albedo of a big bluestem grass canopy is estimated from 60 directional reflectance factor measurements. Effects of estimating albedo with substantially smaller subsets of data are evaluated

    Effects of Forest Disturbances on Forest Structural Parameters Retrieval from Lidar Waveform Data

    Get PDF
    The effect of forest disturbance on the lidar waveform and the forest biomass estimation was demonstrated by model simulation. The results show that the correlation between stand biomass and the lidar waveform indices changes when the stand spatial structure changes due to disturbances rather than the natural succession. This has to be considered in developing algorithms for regional or global mapping of biomass from lidar waveform data

    Transparent and Flexible Thin Film Electroluminescent Devices Using HiTUS Deposition and Laser Processing Fabrication

    Get PDF
    Highly transparent thin film electroluminescent structures offering excellent switch on characteristics, high luminance and large break-down voltages have been deposited onto glass and flexible polymeric materials with no substrate heating using high target utilization sputtering. Deposition of ZnS:Mn as the active light emitting layer and Y2O3,Al2O3,Ta2O5, and HfO2 as dielectric materials arranged in single and multiple layer configurations were investigated. Devices incorporating Al2O3,HfO2 quadruple layers demonstrate the highest attainable luminance at low threshold voltage. Single pulse excimer laser irradiation of the phosphor layer prior to deposition of the top dielectric layer enhanced the luminance of the devices. The devices fabricated on glass and polymeric substrates exhibited a maximum luminance of 500 and 450 cdm−2 when driven at 270 VRMS and 220 VRMS, respectively, with a 1.0 kHz sine wave

    Dynamics of allosteric transitions in GroEL

    Full text link
    The chaperonin GroEL-GroES, a machine which helps some proteins to fold, cycles through a number of allosteric states, the TT state, with high affinity for substrate proteins (SPs), the ATP-bound RR state, and the RR^{\prime\prime} (GroELADPGroESGroEL-ADP-GroES) complex. Structures are known for each of these states. Here, we use a self-organized polymer (SOP) model for the GroEL allosteric states and a general structure-based technique to simulate the dynamics of allosteric transitions in two subunits of GroEL and the heptamer. The TRT \to R transition, in which the apical domains undergo counter-clockwise motion, is mediated by a multiple salt-bridge switch mechanism, in which a series of salt-bridges break and form. The initial event in the RRR \to R^{\prime\prime} transition, during which GroEL rotates clockwise, involves a spectacular outside-in movement of helices K and L that results in K80-D359 salt-bridge formation. In both the transitions there is considerable heterogeneity in the transition pathways. The transition state ensembles (TSEs) connecting the TT, RR, and RR^{\prime\prime} states are broad with the the TSE for the TRT \to R transition being more plastic than the RRR\to R^{\prime\prime} TSE. The results suggest that GroEL functions as a force-transmitting device in which forces of about (5-30) pN may act on the SP during the reaction cycle.Comment: 32 pages, 10 figures (Longer version than the one published

    MODIS Tree Cover Validation for the Circumpolar Taiga-Tundra Transition Zone

    Get PDF
    A validation of the 2005 500m MODIS vegetation continuous fields (VCF) tree cover product in the circumpolar taiga-tundra ecotone was performed using high resolution Quickbird imagery. Assessing the VCF's performance near the northern limits of the boreal forest can help quantify the accuracy of the product within this vegetation transition area. The circumpolar region was divided into longitudinal zones and validation sites were selected in areas of varying tree cover where Quickbird imagery is available in Google Earth. Each site was linked to the corresponding VCF pixel and overlaid with a regular dot grid within the VCF pixel's boundary to estimate percent tree crown cover in the area. Percent tree crown cover was estimated using Quickbird imagery for 396 sites throughout the circumpolar region and related to the VCF's estimates of canopy cover for 2000-2005. Regression results of VCF inter-annual comparisons (2000-2005) and VCF-Quickbird image-interpreted estimates indicate that: (1) Pixel-level, inter-annual comparisons of VCF estimates of percent canopy cover were linearly related (mean R(sup 2) = 0.77) and exhibited an average root mean square error (RMSE) of 10.1 % and an average root mean square difference (RMSD) of 7.3%. (2) A comparison of image-interpreted percent tree crown cover estimates based on dot counts on Quickbird color images by two different interpreters were more variable (R(sup 2) = 0.73, RMSE = 14.8%, RMSD = 18.7%) than VCF inter-annual comparisons. (3) Across the circumpolar boreal region, 2005 VCF-Quickbird comparisons were linearly related, with an R(sup 2) = 0.57, a RMSE = 13.4% and a RMSD = 21.3%, with a tendency to over-estimate areas of low percent tree cover and anomalous VCF results in Scandinavia. The relationship of the VCF estimates and ground reference indicate to potential users that the VCF's tree cover values for individual pixels, particularly those below 20% tree cover, may not be precise enough to monitor 500m pixel-level tree cover in the taiga-tundra transition zone

    When a discriminating dose assay is not enough: measuring the intensity of insecticide resistance in malaria vectors

    Get PDF
    Background Guidelines from the World Health Organization for monitoring insecticide resistance in disease vectors recommend exposing insects to a predetermined discriminating dose of insecticide and recording the percentage mortality in the population. This standardized methodology has been widely adopted for malaria vectors and has provided valuable data on the spread and prevalence of resistance. However, understanding the potential impact of this resistance on malaria control requires a more quantitative measure of the strength or intensity of this resistance. Methods Bioassays were adapted to quantify the level of resistance to permethrin in laboratory colonies and field populations of Anopheles gambiae sensu lato. WHO susceptibility tube assays were used to produce data on mortality versus exposure time and CDC bottle bioassays were used to generate dose response data sets. A modified version of the CDC bottle bioassay, known as the Resistance Intensity Rapid Diagnostic Test (I-RDT), was also used to measure the knockdown and mortality after exposure to different multipliers of the diagnostic dose. Finally cone bioassays were used to assess mortality after exposure to insecticide treated nets. Results The time response assays were simple to perform but not suitable for highly resistant populations. After initial problems with stability of insecticide and bottle washing were resolved, the CDC bottle bioassay provided a reproducible, quantitative measure of resistance but there were challenges performing this under field conditions. The I-RDT was simple to perform and interpret although the end point selected (immediate knockdown versus 24 h mortality) could dramatically affect the interpretation of the data. The utility of the cone bioassays was dependent on net type and thus appropriate controls are needed to interpret the operational significance of these data sets. Conclusions Incorporating quantitative measures of resistance strength, and utilizing bioassays with field doses of insecticides, will help interpret the possible impact of resistance on vector control activities. Each method tested had different benefits and challenges and agreement on a common methodology would be beneficial so that data are generated in a standardized format. This type of quantitative data are an important prerequisite to linking resistance strength to epidemiological outcomes

    Schools and civil society : corporate or community governance

    Get PDF
    School improvement depends upon mediating the cultural conditions of learning as young people journey between their parochial worlds and the public world of cosmopolitan society. Governing bodies have a crucial role in including or diminishing the representation of different cultural traditions and in enabling or frustrating the expression of voice and deliberation of differences whose resolution is central to the mediation of and responsiveness to learning needs. A recent study of governing bodies in England and Wales argues that the trend to corporatising school governance will diminish the capacity of schools to learn how they can understand cultural traditions and accommodate them in their curricula and teaching strategies. A democratic, stakeholder model remains crucial to the effective practice of governing schools. By deliberating and reconciling social and cultural differences, governance constitutes the practices for mediating particular and cosmopolitan worlds and thus the conditions for engaging young people in their learning, as well as in the preparation for citizenship in civil society
    corecore