Mass flow rate of fine and cohesive powders under differential air pressure

The file attached to this record is the author's final peer reviewed version.Air-powder interactions are of practical importance in the production of pharmaceuticals, food and high value added chemicals manufactured using powders. For examples, air-powder effects enable consistent and effective dosing of fine cohesive powders into dies on high productivity rotary presses due to the suction fill effect. A purpose built experimental testing rig was developed and calibrated in order to develop a basic understanding of effect of air pressure on the mass flow rate of fine and cohesive powders. The powder materials were selected to enable the study of the effect of particle properties, such as size and density, and processing conditions such as differential air pressure, on the mass flow rate of powders. The models available in the literature developed for coarse free flowing sands under differential pressure were found inadequate to describe the experimental observations and to predict the flow behaviour of fine and cohesive powders. A new powder flow model was developed using established dimensional analysis methods based on the experimental data. The proposed model includes terms that account for the effect of differential pressure and reduces to the classic Beverloo model in absence of differential pressure. The models was validated and can be used for formulation and process design for flow regimes where air-powder interactions are important

Assessment for Learning: An Outcomes-Based Approach to Enhance Learning

This paper draws on two case studies from UK universities to advance debate regarding assessment strategies and methods in the ERAU Worldwide. It focuses on the use of summative and formative assessment, the role of feedback, and the importance of learning outcomes for continuous academic improvement. Findings from the first case study, with three cohorts of graduate students, show that, where students are encouraged to learn from their mistakes via formative feedback, improvement is more likely than when standard approaches to assessment are employed. The second case study identifies one university\u27s approach to changing the design, delivery and assessment of its courses. Findings reveal the need to match assessment and learning outcomes in order to enhance students\u27 learning experiences

Expeditionary Blended Learning: New Opportunities and Lessons From the United Kingdom

Recent experiences in live course delivery at ERAU\u27s UK campus, combined with dramatic changes in the operational deployment tempo of US military forces assigned at these bases, creates both challenges and opportunities. Exploiting experiences with blended learning at The Open University, traditional learning at the University of Hertfordshire and other UK universities, and teaching concepts in use within the UK\u27s military staff colleges leads to the proposed Expeditionary model for blended learning within the ERAU European Region. This model can deliver enhanced student involvement and increased enrollments, provided suitable changes in ERAU\u27s underlying business model can be made. A Strengths I Weaknesses I Opportunities I Threats (SWOT) analysis highlights elements of this proposal, while indicating areas that need further examination

Testis-Specific Bb8 Is Essential in the Development of Spermatid Mitochondria.

Mitochondria are essential organelles of developing spermatids in Drosophila, which undergo dramatic changes in size and shape after meiotic division, where mitochondria localized in the cytoplasm, migrate near the nucleus, aggregate, fuse and create the Nebenkern. During spermatid elongation the two similar mitochondrial derivatives of the Nebenkern start to elongate parallel to the axoneme. One of the elongated mitochondrial derivatives starts to lose volume and becomes the minor mitochondrial derivative, while the other one accumulates paracrystalline and becomes the major mitochondrial derivative. Proteins and intracellular environment that are responsible for cyst elongation and paracrystalline formation in the major mitochondrial derivative need to be identified. In this work we investigate the function of the testis specific big bubble 8 (bb8) gene during spermatogenesis. We show that a Minos element insertion in bb8 gene, a predicted glutamate dehydrogenase, causes recessive male sterility. We demonstrate bb8 mRNA enrichment in spermatids and the mitochondrial localisation of Bb8 protein during spermatogenesis. We report that megamitochondria develop in the homozygous mutant testes, in elongating spermatids. Ultrastructural analysis of the cross section of elongated spermatids shows enlarged mitochondria and the production of paracrystalline in both major and minor mitochondrial derivatives. Our results suggest that the Bb8 protein and presumably glutamate metabolism has a crucial role in the normal development and establishment of the identity of the mitochondrial derivatives during spermatid elongation

Powder die filling under gravity and suction fill mechanisms

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.In pharmaceutical tablet manufacturing, the powder formulation is filled into a die and compacted into a tablet using rigid punches. Die fill is important because it limits the productivity of tablet presses and determines key quality attributes of tablets including weight and content uniformity. Die fill occurs due to gravity and suction fill mechanisms. A model linear shoe-die filling system has been instrumented with pressure measurement devices for detailed characterisation of air pressure evolution as the powder mass is delivered in the die. Systematic experiments were carried out using a range of microcrystalline cellulose powders to explore the role of powder properties (such as particle size and bulk density) and operating parameters (such as shoe and die geometry, shoe and suction punch kinematics and powder filling level) on powder delivery. Existing models were found inadequate to describe the mass flow rate of powders under a diversity of gravity and suction filling conditions. The pressure measurements enabled the development of a new die fill model using the Buckingham Π theorem. The model includes separate terms for the contribution of the mass of powder delivered under gravity and suction fill mechanisms. The experimental procedures required to extract model parameters are described. The model is applicable to the handling and dosing of fine and cohesive powders where small differences in air pressure have a significant impact on the powder flow process. The practical application of the model for predicting die filling behaviour in a high-speed rotary tablet press is demonstrated by assuming operating conditions of a typical rotary tablet press. This approach can be adapted to assist formulation design and process development for operations involving handling and dosing of fine and cohesive powder

Vacuum assisted flow initiation in arching powders

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.The discharge of powders from hoppers usually takes place in open atmosphere. However, in powder pressing industries (e.g. manufacturing of pharmaceutical tablets, detergents, ceramics, powder metallurgy etc.) there are handling operations where powders are filled into closed cavities such as dies. During this process the air pressure is increased as powder is delivered into the die. At the same time typical tablet production equipment creates a suction effect. A critical orifice measurement apparatus was developed to study powder flow initiation from an arching state into an enclosure where the air pressure is reduced. It was shown that a very small reduction of pressure changed the critical orifice diameter significantly. Dimensional analysis was carried out to relate powder properties (particle size and density) and processing parameters (geometry of the system and differential pressure necessary to break the arch). A relationship was developed to calculate the pressure difference necessary to initiate powder flow. The relationship has two empirical parameters which are calibrated by performing simple experiments using the testing rig developed

Using small-angle X-ray scattering to investigate the compaction behaviour of a granulated clay

The compaction behaviour of a commercial granulated clay (magnesium aluminium smectite, gMgSm) was investigated using macroscopic pressure-density measurements, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray microtomography (XμT) and small-angle X-ray scattering (SAXS). This material was studied as a potential compaction excipient for pharmaceutical tabletting, but also as a model system demonstrating the capabilities of SAXS for investigating compaction in other situations. Bulk compaction measurements showed that the gMgSm was more difficult to compact than polymeric pharmaceutical excipients such as spheronised microcrystalline cellulose (sMCC), corresponding to harder granules. Moreover, in spite of using lubrication (magnesium stearate) on the tooling surfaces, rather high ejection forces were observed, which may cause problems during commercial tabletting, requiring further amelioration. Although the compacted gMgSm specimens were more porous, however, they still exhibited acceptable cohesive strengths, comparable to sMCC. Hence, there may be scope for using granular clay as one component of a tabletting formulation. Following principles established in previous work, SAXS revealed information concerning the intragranular structure of the gMgSm and its response to compaction. The results showed that little compression of the intragranular morphology occurred below a relative density of 0 · 6, suggesting that granule rearrangements or fragmentation were the dominant mechanisms during this stage. By contrast, granule deformation became considerably more important at higher relative density, which also coincided with a significant increase in the cohesive strength of compacted specimens. Spatially-resolved SAXS data was also used to investigate local variations in compaction behaviour within specimens of different shape. The results revealed the expected patterns of density variations within flat-faced cylindrical specimens. Significant variations in density, the magnitude of compressive strain and principal strain direction were also revealed in the vicinity of a debossed feature (a diametral notch) and within bi-convex specimens. The variations in compaction around the debossed notch, with a small region of high density below and low density along the flanks, appeared to be responsible for extensive cracking, which could also cause problems in commercial tabletting

A global assessment of surveillance methods for dominant malaria vectors

The epidemiology of human malaria differs considerably between and within geographic regions due, in part, to variability in mosquito species behaviours. Recently, the WHO emphasised stratifying interventions using local surveillance data to reduce malaria. The usefulness of vector surveillance is entirely dependent on the biases inherent in the sampling methods deployed to monitor mosquito populations. To understand and interpret mosquito surveillance data, the frequency of use of malaria vector collection methods was analysed from a georeferenced vector dataset (> 10,000 data records), extracted from 875 manuscripts across Africa, the Americas and the Asia-Pacific region. Commonly deployed mosquito collection methods tend to target anticipated vector behaviours in a region to maximise sample size (and by default, ignoring other behaviours). Mosquito collection methods targeting both host-seeking and resting behaviours were seldomly deployed concurrently at the same site. A balanced sampling design using multiple methods would improve the understanding of the range of vector behaviours, leading to improved surveillance and more effective vector control

Proteomic diversification of spermatostyles among six species of whirligig beetles

Seminal fluid protein composition is complex and commonly assumed to be rapidly divergent due to functional interactions with both sperm and the female reproductive tract (FRT), both of which evolve rapidly. In addition to sperm, seminal fluid may contain structures, such as mating plugs and spermatophores. Here, we investigate the evolutionary diversification of a lesser-known ejaculate structure: the spermatostyle, which has independently arisen in several families of beetles and true bugs. We characterized the spermatostyle proteome, in addition to spermatostyle and FRT morphology, in six species of whirligig beetles (family Gyrinidae). Spermatostyles were enriched for proteolytic enzymes, and assays confirmed they possess proteolytic activity. Sperm-leucylaminopeptidases (S-LAPs) were particularly abundant, and their localization to spermatostyles was confirmed by immunohistochemistry. Although there was evidence for functional conservation of spermatostyle proteomes across species, phylogenetic regressions suggest evolutionary covariation between protein composition and the morphology of both spermatostyles and FRTs. We postulate that S-LAPs (and other proteases) have evolved a novel structural role in spermatostyles and discuss spermatostyles as adaptations for delivering male-derived materials to females.Whirligig beetle sperm travel cooperatively through the female reproductive tract attached to a spermatostyle, a poorly studied rod-like structure. Proteome characterization revealed that spermatostyles are comprised of a restricted set of proteases and possess catalytic activity. Spermatostyle composition was also found to codiversify with spermatostyle length and female tract morphology. imag